From: Peter Chen
> Print correct command ring address using 'val_64'.
>
> Cc: stable <sta...@vger.kernel.org>
> Signed-off-by: Peter Chen <peter.c...@nxp.com>
> ---
> drivers/usb/host/xhci-mem.c | 2 +-
> 1 file changed, 1 insertion(+), 1 deletion(-)
>
> diff --git a/drivers/usb/host/xhci-mem.c b/drivers/usb/host/xhci-mem.c
> index de1503c..d7879f1 100644
> --- a/drivers/usb/host/xhci-mem.c
> +++ b/drivers/usb/host/xhci-mem.c
> @@ -2492,7 +2492,7 @@ int xhci_mem_init(struct xhci_hcd *xhci, gfp_t flags)
> (xhci->cmd_ring->first_seg->dma & (u64) ~CMD_RING_RSVD_BITS) |
> xhci->cmd_ring->cycle_state;
> xhci_dbg_trace(xhci, trace_xhci_dbg_init,
> - "// Setting command ring address to 0x%x", val);
> + "// Setting command ring address to 0x%016llx", val_64);
Using "%#llx" might be better - especially if this code is used on 32bit.
David
--
To unsubscribe from this list: send the line "unsubscribe linux-usb" in
the body of a message to majord...@vger.kernel.org
More majordomo info at http://vger.kernel.org/majordomo-info.html
