On Thu, 2017-04-06 at 15:58 +0530, Kishon Vijay Abraham I wrote:
> 
> On Friday 31 March 2017 01:05 PM, Chunfeng Yun wrote:
> > The default value of RX detection stable time is 10us, and this
> > margin is too big for some critical cases which cause U3 link fail
> > and link to U2(probability is about 1%). So change it to 5us.
> > 
> merged all the phy patches in this series to linux-phy -next.
Thanks a lot
> 
> Thanks
> Kishon
> 
> > Signed-off-by: Chunfeng Yun <chunfeng....@mediatek.com>
> > ---
> >  drivers/phy/phy-mt65xx-usb3.c |   18 ++++++++++++++++++
> >  1 file changed, 18 insertions(+)
> > 
> > diff --git a/drivers/phy/phy-mt65xx-usb3.c b/drivers/phy/phy-mt65xx-usb3.c
> > index d972067..fe2392a 100644
> > --- a/drivers/phy/phy-mt65xx-usb3.c
> > +++ b/drivers/phy/phy-mt65xx-usb3.c
> > @@ -112,6 +112,14 @@
> >  #define P3D_RG_CDR_BIR_LTD0                GENMASK(12, 8)
> >  #define P3D_RG_CDR_BIR_LTD0_VAL(x) ((0x1f & (x)) << 8)
> >  
> > +#define U3P_U3_PHYD_RXDET1         (SSUSB_SIFSLV_U3PHYD_BASE + 0x128)
> > +#define P3D_RG_RXDET_STB2_SET              GENMASK(17, 9)
> > +#define P3D_RG_RXDET_STB2_SET_VAL(x)       ((0x1ff & (x)) << 9)
> > +
> > +#define U3P_U3_PHYD_RXDET2         (SSUSB_SIFSLV_U3PHYD_BASE + 0x12c)
> > +#define P3D_RG_RXDET_STB2_SET_P3   GENMASK(8, 0)
> > +#define P3D_RG_RXDET_STB2_SET_P3_VAL(x)    (0x1ff & (x))
> > +
> >  #define U3P_XTALCTL3               (SSUSB_SIFSLV_SPLLC + 0x0018)
> >  #define XC3_RG_U3_XTAL_RX_PWD              BIT(9)
> >  #define XC3_RG_U3_FRC_XTAL_RX_PWD  BIT(8)
> > @@ -295,6 +303,16 @@ static void phy_instance_init(struct mt65xx_u3phy 
> > *u3phy,
> >     tmp |= P3D_RG_CDR_BIR_LTD0_VAL(0xc) | P3D_RG_CDR_BIR_LTD1_VAL(0x3);
> >     writel(tmp, port_base + U3P_PHYD_CDR1);
> >  
> > +   tmp = readl(port_base + U3P_U3_PHYD_RXDET1);
> > +   tmp &= ~P3D_RG_RXDET_STB2_SET;
> > +   tmp |= P3D_RG_RXDET_STB2_SET_VAL(0x10);
> > +   writel(tmp, port_base + U3P_U3_PHYD_RXDET1);
> > +
> > +   tmp = readl(port_base + U3P_U3_PHYD_RXDET2);
> > +   tmp &= ~P3D_RG_RXDET_STB2_SET_P3;
> > +   tmp |= P3D_RG_RXDET_STB2_SET_P3_VAL(0x10);
> > +   writel(tmp, port_base + U3P_U3_PHYD_RXDET2);
> > +
> >     dev_dbg(u3phy->dev, "%s(%d)\n", __func__, index);
> >  }
> >  
> > 


--
To unsubscribe from this list: send the line "unsubscribe linux-usb" in
the body of a message to majord...@vger.kernel.org
More majordomo info at  http://vger.kernel.org/majordomo-info.html

Reply via email to