[ 1.633903] pl061_gpio f8012000.gpio: PL061 GPIO chip @0x00000000f8012000 registered [ 1.634335] pl061_gpio f8013000.gpio: PL061 GPIO chip @0x00000000f8013000 registered [ 1.634422] pl061_gpio f8014000.gpio: names 9 do not match number of GPIOs 8 [ 1.634760] pl061_gpio f8014000.gpio: PL061 GPIO chip @0x00000000f8014000 registered [ 1.635160] pl061_gpio f7020000.gpio: PL061 GPIO chip @0x00000000f7020000 registered [ 1.635561] pl061_gpio f7021000.gpio: PL061 GPIO chip @0x00000000f7021000 registered [ 1.635970] pl061_gpio f7022000.gpio: PL061 GPIO chip @0x00000000f7022000 registered [ 1.636378] pl061_gpio f7023000.gpio: PL061 GPIO chip @0x00000000f7023000 registered [ 1.636463] pl061_gpio f7024000.gpio: names 9 do not match number of GPIOs 8 [ 1.636801] pl061_gpio f7024000.gpio: PL061 GPIO chip @0x00000000f7024000 registered [ 1.637213] pl061_gpio f7025000.gpio: PL061 GPIO chip @0x00000000f7025000 registered [ 1.637626] pl061_gpio f7026000.gpio: PL061 GPIO chip @0x00000000f7026000 registered [ 1.638168] pl061_gpio f7027000.gpio: PL061 GPIO chip @0x00000000f7027000 registered [ 1.638579] pl061_gpio f7028000.gpio: PL061 GPIO chip @0x00000000f7028000 registered [ 1.638985] pl061_gpio f7029000.gpio: PL061 GPIO chip @0x00000000f7029000 registered [ 1.639384] pl061_gpio f702a000.gpio: PL061 GPIO chip @0x00000000f702a000 registered [ 1.639791] pl061_gpio f702b000.gpio: PL061 GPIO chip @0x00000000f702b000 registered [ 1.640190] pl061_gpio f702c000.gpio: PL061 GPIO chip @0x00000000f702c000 registered [ 1.640594] pl061_gpio f702d000.gpio: PL061 GPIO chip @0x00000000f702d000 registered [ 1.641002] pl061_gpio f702e000.gpio: PL061 GPIO chip @0x00000000f702e000 registered [ 1.641417] pl061_gpio f702f000.gpio: PL061 GPIO chip @0x00000000f702f000 registered [ 1.644148] k3-dma f7370000.dma: initialized [ 1.646180] Serial: 8250/16550 driver, 4 ports, IRQ sharing disabled [ 1.648121] [drm] wait for external HDMI bridge driver. [ 1.648184] Mali<2>: [ 1.648191] Inserting Mali v800 device driver. [ 1.648204] Mali<2>: [ 1.648210] Compiled: Apr 4 2017, time: 10:11:01. [ 1.648222] Mali<2>: [ 1.648227] Driver revision: -v4.11-rc5-55-ga758cd1 [ 1.648239] Mali<2>: [ 1.648245] mali_module_init() registering driver [ 1.648350] Mali<2>: [ 1.648356] mali_probe(): Called for platform device 3f100000.mali [ 1.648671] Mali<2>: [ 1.648678] Mali SWAP: Swap out threshold vaule is 60M [ 1.648709] Mali<2>: [ 1.648715] Mali memory settings (shared: 0x40000000) [ 1.648728] Mali<2>: [ 1.648734] Using device defined frame buffer settings (0x00708000@0x3F100000) [ 1.648747] Mali<2>: [ 1.648753] Memory Validator installed for Mali physical address base=0x3F100000, size=0x00708000 [ 1.648771] Mali<2>: [ 1.648776] Mali PM domain: Creating Mali PM domain (mask=0x00001000) [ 1.648791] Mali<2>: [ 1.648796] Broadcast: Creating Mali Broadcast unit: Mali_Broadcast [ 1.648826] Mali<2>: [ 1.648832] Mali PP: Creating Mali PP core: Mali_PP0 [ 1.648845] Mali<2>: [ 1.648850] Mali PP: Base address of PP core: 0xf4088000 [ 1.648987] Mali<2>: [ 1.648994] Found Mali GPU Mali-450 MP r0p0 [ 1.649558] Mali<2>: [ 1.649563] Mali DLBU: Initializing [ 1.649611] Mali<2>: [ 1.649620] Mali L2 cache: Created Mali_L2: 8K, 4-way, 64byte cache line, 128bit external bus [ 1.649641] Mali<2>: [ 1.649647] Mali L2 cache: Created Mali_L2: 128K, 4-way, 64byte cache line, 128bit external bus [ 1.649678] Mali<2>: [ 1.649683] Mali MMU: Creating Mali MMU: Mali_GP_MMU [ 1.649719] Mali<2>: [ 1.649723] mali_mmu_probe_irq_acknowledge: intstat 0x3 [ 1.649733] Mali<2>: [ 1.649736] Probe: Page fault detect: PASSED [ 1.649745] Mali<2>: [ 1.649749] Probe: Bus read error detect: PASSED [ 1.649775] Mali<2>: [ 1.649780] Mali GP: Creating Mali GP core: Mali_GP [ 1.649824] Mali<2>: [ 1.649829] Mali MMU: Creating Mali MMU: Mali_PP0_MMU [ 1.649861] Mali<2>: [ 1.649864] mali_mmu_probe_irq_acknowledge: intstat 0x3 [ 1.649874] Mali<2>: [ 1.649877] Probe: Page fault detect: PASSED [ 1.649886] Mali<2>: [ 1.649889] Probe: Bus read error detect: PASSED [ 1.649912] Mali<2>: [ 1.649918] Mali PP: Creating Mali PP core: Mali_PP0 [ 1.649930] Mali<2>: [ 1.649936] Mali PP: Base address of PP core: 0xf4088000 [ 1.649976] Mali<2>: [ 1.649996] Mali MMU: Creating Mali MMU: Mali_PP1_MMU [ 1.650032] Mali<2>: [ 1.650035] mali_mmu_probe_irq_acknowledge: intstat 0x3 [ 1.650045] Mali<2>: [ 1.650048] Probe: Page fault detect: PASSED [ 1.650057] Mali<2>: [ 1.650061] Probe: Bus read error detect: PASSED [ 1.650084] Mali<2>: [ 1.650089] Mali PP: Creating Mali PP core: Mali_PP1 [ 1.650101] Mali<2>: [ 1.650106] Mali PP: Base address of PP core: 0xf408a000 [ 1.650147] Mali<2>: [ 1.650152] Mali MMU: Creating Mali MMU: Mali_PP2_MMU [ 1.650185] Mali<2>: [ 1.650188] mali_mmu_probe_irq_acknowledge: intstat 0x3 [ 1.650198] Mali<2>: [ 1.650201] Probe: Page fault detect: PASSED [ 1.650210] Mali<2>: [ 1.650213] Probe: Bus read error detect: PASSED [ 1.650236] Mali<2>: [ 1.650241] Mali PP: Creating Mali PP core: Mali_PP2 [ 1.650253] Mali<2>: [ 1.650258] Mali PP: Base address of PP core: 0xf408c000 [ 1.650299] Mali<2>: [ 1.650305] Mali MMU: Creating Mali MMU: Mali_PP3_MMU [ 1.650346] Mali<2>: [ 1.650350] mali_mmu_probe_irq_acknowledge: intstat 0x3 [ 1.650359] Mali<2>: [ 1.650362] Probe: Page fault detect: PASSED [ 1.650371] Mali<2>: [ 1.650375] Probe: Bus read error detect: PASSED [ 1.650397] Mali<2>: [ 1.650402] Mali PP: Creating Mali PP core: Mali_PP3 [ 1.650415] Mali<2>: [ 1.650420] Mali PP: Base address of PP core: 0xf408e000 [ 1.650460] Mali<2>: [ 1.650466] Starting new virtual group for MMU PP broadcast core Mali_PP_MMU_Broadcast [ 1.650480] Mali<2>: [ 1.650486] Mali DLBU: Creating Mali dynamic load balancing unit: Mali_DLBU [ 1.650506] Mali<2>: [ 1.650512] Broadcast: Creating Mali Broadcast unit: Mali_Broadcast [ 1.650531] Mali<2>: [ 1.650537] Mali MMU: Creating Mali MMU: Mali_PP_MMU_Broadcast [ 1.650553] Mali<2>: [ 1.650558] Mali PP: Creating Mali PP core: Mali_PP_Broadcast [ 1.650570] Mali<2>: [ 1.650575] Mali PP: Base address of PP core: 0xf4096000 [ 1.650614] Mali<2>: [ 1.650619] 4+0 PP cores initialized [ 1.650644] Mali<2>: [ 1.650650] Mali GPU Timer: 50 [ 1.650663] Mali<2>: [ 1.650669] Mali GPU Utilization: No platform utilization handler installed [ 1.651398] Mali<2>: [ 1.651404] mali_probe(): Successfully initialized driver for platform device 3f100000.mali [ 1.651478] Mali: [ 1.651483] Mali device driver loaded [ 1.660729] brd: module loaded [ 1.668822] loop: module loaded [ 1.669167] (stk) :sysfs entries created [ 1.669246] (hci_tty): inside hci_tty_init [ 1.669342] (hci_tty): allocated 251, 0 [ 1.673444] libphy: Fixed MDIO Bus: probed [ 1.673462] tun: Universal TUN/TAP device driver, 1.6 [ 1.673690] sky2: driver version 1.30 [ 1.674187] pegasus: v0.9.3 (2013/04/25), Pegasus/Pegasus II USB Ethernet driver [ 1.674235] usbcore: registered new interface driver pegasus [ 1.674276] usbcore: registered new interface driver rtl8150 [ 1.674317] usbcore: registered new interface driver r8152 [ 1.674354] usbcore: registered new interface driver asix [ 1.674392] usbcore: registered new interface driver ax88179_178a [ 1.674434] usbcore: registered new interface driver cdc_ether [ 1.674471] usbcore: registered new interface driver dm9601 [ 1.674510] usbcore: registered new interface driver CoreChips [ 1.674549] usbcore: registered new interface driver smsc75xx [ 1.674589] usbcore: registered new interface driver smsc95xx [ 1.674626] usbcore: registered new interface driver net1080 [ 1.674667] usbcore: registered new interface driver plusb [ 1.674703] usbcore: registered new interface driver cdc_subset [ 1.674747] usbcore: registered new interface driver zaurus [ 1.674786] usbcore: registered new interface driver MOSCHIP usb-ethernet driver [ 1.674830] usbcore: registered new interface driver cdc_ncm [ 1.675156] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver [ 1.675167] ehci-pci: EHCI PCI platform driver [ 1.675215] ehci-platform: EHCI generic platform driver [ 1.675334] ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver [ 1.675368] ohci-pci: OHCI PCI platform driver [ 1.675407] ohci-platform: OHCI generic platform driver [ 1.675547] usbcore: registered new interface driver cdc_acm [ 1.675558] cdc_acm: USB Abstract Control Model driver for USB modems and ISDN adapters [ 1.675596] usbcore: registered new interface driver usb-storage [ 1.675686] usbcore: registered new interface driver usbserial [ 1.675722] usbcore: registered new interface driver usbserial_generic [ 1.675760] usbserial: USB Serial support registered for generic [ 1.675797] usbcore: registered new interface driver ftdi_sio [ 1.675836] usbserial: USB Serial support registered for FTDI USB Serial Device [ 1.675875] usbcore: registered new interface driver option [ 1.675918] usbserial: USB Serial support registered for GSM modem (1-port) [ 1.675954] usbcore: registered new interface driver pl2303 [ 1.675993] usbserial: USB Serial support registered for pl2303 [ 1.676031] usbcore: registered new interface driver qcserial [ 1.676068] usbserial: USB Serial support registered for Qualcomm USB modem [ 1.676105] usbcore: registered new interface driver usb_serial_simple [ 1.676139] usbserial: USB Serial support registered for carelink [ 1.676182] usbserial: USB Serial support registered for zio [ 1.676223] usbserial: USB Serial support registered for funsoft [ 1.676259] usbserial: USB Serial support registered for flashloader [ 1.676296] usbserial: USB Serial support registered for google [ 1.676333] usbserial: USB Serial support registered for vivopay [ 1.676368] usbserial: USB Serial support registered for moto_modem [ 1.676403] usbserial: USB Serial support registered for novatel_gps [ 1.676442] usbserial: USB Serial support registered for hp4x [ 1.676482] usbserial: USB Serial support registered for suunto [ 1.676520] usbserial: USB Serial support registered for siemens_mpi [ 1.676636] gadgetfs: USB Gadget filesystem, version 24 Aug 2004 [ 1.677178] input: HISI 65xx PowerOn Key as /devices/platform/f8000000.pmic/hi65xx-powerkey.0.auto/input/input0 [ 1.677653] rtc-pl031 f8003000.rtc: rtc core: registered pl031 as rtc0 [ 1.677844] rtc-pl031 f8004000.rtc: rtc core: registered pl031 as rtc1 [ 1.678056] i2c /dev entries driver [ 1.682015] hisi_thermal f7030700.tsensor: THERMAL ALARM: T > 0 [ 1.682083] hisi_thermal f7030700.tsensor: failed to register sensor id 0: -19 [ 1.682096] hisi_thermal f7030700.tsensor: failed to register thermal sensor: -19 [ 1.682124] hisi_thermal f7030700.tsensor: failed to register sensor id 1: -19 [ 1.682136] hisi_thermal f7030700.tsensor: failed to register thermal sensor: -19 [ 1.694018] hisi_thermal f7030700.tsensor: failed to register sensor id 3: -19 [ 1.694031] hisi_thermal f7030700.tsensor: failed to register thermal sensor: -19 [ 1.694265] device-mapper: uevent: version 1.0.3 [ 1.694477] device-mapper: ioctl: 4.35.0-ioctl (2016-06-23) initialised: dm-devel@redhat.com [ 1.694493] Bluetooth: HCI UART driver ver 2.3 [ 1.694505] Bluetooth: HCI UART protocol H4 registered [ 1.695105] (stc): chnl_id list empty :4 [ 1.695110] (stk) : st_kim_start [ 1.707121] sdhci: Secure Digital Host Controller Interface driver [ 1.707140] sdhci: Copyright(c) Pierre Ossman [ 1.707176] Synopsys Designware Multimedia Card Interface Driver [ 1.707853] dwmmc_k3 f723d000.dwmmc0: fifo-depth property not found, using value of FIFOTH register as default [ 1.707968] dwmmc_k3 f723d000.dwmmc0: IDMAC supports 32-bit address mode. [ 1.722393] dwmmc_k3 f723d000.dwmmc0: Using internal DMA controller. [ 1.722410] dwmmc_k3 f723d000.dwmmc0: Version ID is 250a [ 1.722465] dwmmc_k3 f723d000.dwmmc0: DW MMC controller at irq 41,32 bit host data width,8 deep fifo [ 1.722673] mmc_host mmc0: card is non-removable. [ 1.742176] mmc_host mmc0: Bus speed (slot 0) = 24800000Hz (slot req 400000Hz, actual 400000HZ div = 31) [ 1.762233] dwmmc_k3 f723d000.dwmmc0: 1 slots initialized [ 1.762628] dwmmc_k3 f723e000.dwmmc1: fifo-depth property not found, using value of FIFOTH register as default [ 1.762779] dwmmc_k3 f723e000.dwmmc1: IDMAC supports 32-bit address mode. [ 1.763702] dwmmc_k3 f723e000.dwmmc1: Using internal DMA controller. [ 1.763720] dwmmc_k3 f723e000.dwmmc1: Version ID is 250a [ 1.763770] dwmmc_k3 f723e000.dwmmc1: DW MMC controller at irq 42,32 bit host data width,128 deep fifo [ 1.763986] dwmmc_k3 f723e000.dwmmc1: Got CD GPIO [ 1.782184] mmc_host mmc1: Bus speed (slot 0) = 24800000Hz (slot req 400000Hz, actual 400000HZ div = 31) [ 1.800137] (stk) :ldisc_install = 1 [ 1.804040] dwmmc_k3 f723e000.dwmmc1: 1 slots initialized [ 1.804469] dwmmc_k3 f723f000.dwmmc2: fifo-depth property not found, using value of FIFOTH register as default [ 1.804580] dwmmc_k3 f723f000.dwmmc2: IDMAC supports 32-bit address mode. [ 1.804724] dwmmc_k3 f723f000.dwmmc2: Using internal DMA controller. [ 1.804740] dwmmc_k3 f723f000.dwmmc2: Version ID is 250a [ 1.804780] dwmmc_k3 f723f000.dwmmc2: DW MMC controller at irq 43,32 bit host data width,128 deep fifo [ 1.805038] sdhci-pltfm: SDHCI platform and OF driver helper [ 1.806132] hidraw: raw HID events driver (C) Jiri Kosina [ 1.807379] usbcore: registered new interface driver usbhid [ 1.807395] usbhid: USB HID core driver [ 1.810237] ashmem: initialized [ 1.811889] u32 classifier [ 1.811905] Actions configured [ 1.811919] Netfilter messages via NETLINK v0.30. [ 1.812133] nf_conntrack version 0.5.0 (16384 buckets, 65536 max) [ 1.812350] ctnetlink v0.93: registering with nfnetlink. [ 1.812629] xt_time: kernel timezone is -0000 [ 1.812864] ip_tables: (C) 2000-2006 Netfilter Core Team [ 1.813084] arp_tables: arp_tables: (C) 2002 David S. Miller [ 1.813154] Initializing XFRM netlink socket [ 1.813563] NET: Registered protocol family 10 [ 1.814550] Segment Routing with IPv6 [ 1.814628] mip6: Mobile IPv6 [ 1.814656] ip6_tables: (C) 2000-2006 Netfilter Core Team [ 1.814945] sit: IPv6, IPv4 and MPLS over IPv4 tunneling driver [ 1.815424] NET: Registered protocol family 17 [ 1.815447] NET: Registered protocol family 15 [ 1.815495] Bridge firewalling registered [ 1.815791] Bluetooth: RFCOMM TTY layer initialized [ 1.815809] Bluetooth: RFCOMM socket layer initialized [ 1.815844] Bluetooth: RFCOMM ver 1.11 [ 1.815863] Bluetooth: HIDP (Human Interface Emulation) ver 1.2 [ 1.815879] Bluetooth: HIDP socket layer initialized [ 1.815942] 8021q: 802.1Q VLAN Support v1.8 [ 1.816126] 9pnet: Installing 9P2000 support [ 1.816190] Key type dns_resolver registered [ 1.816684] registered taskstats version 1 [ 1.818017] Btrfs loaded, crc32c=crc32c-generic [ 1.826070] f7111000.uart: ttyAMA1 at MMIO 0xf7111000 (irq = 8, base_baud = 0) is a PL011 rev2 [ 1.826450] f7112000.uart: ttyAMA2 at MMIO 0xf7112000 (irq = 9, base_baud = 0) is a PL011 rev2 [ 1.826752] f7113000.uart: ttyAMA3 at MMIO 0xf7113000 (irq = 10, base_baud = 0) is a PL011 rev2 [ 1.837585] mmc_host mmc0: Bus speed (slot 0) = 51756522Hz (slot req 52000000Hz, actual 51756522HZ div = 0) [ 1.843964] mmc0: new high speed MMC card at address 0001 [ 1.844574] mmcblk0: mmc0:0001 H8G1e\x05 7.28 GiB [ 1.844898] mmcblk0boot0: mmc0:0001 H8G1e\x05 partition 1 4.00 MiB [ 1.845209] mmcblk0boot1: mmc0:0001 H8G1e\x05 partition 2 4.00 MiB [ 1.845524] mmcblk0rpmb: mmc0:0001 H8G1e\x05 partition 3 4.00 MiB [ 1.848885] mmcblk0: p1 p2 p3 p4 p5 p6 p7 p8 p9 p10 [ 2.818150] (stk) :ldisc installation timeout [ 2.818157] (stk) :ldisc_install = 0 [ 3.842139] (stk) : timed out waiting for ldisc to be un-installed [ 3.949156] (stk) :ldisc_install = 1 [ 4.350564] console [ttyAMA3] enabled [ 4.358752] ssp-pl022 f7106000.spi: ARM PL022 driver, device ID: 0x00041022 [ 4.365795] ssp-pl022 f7106000.spi: mapped registers from 0x00000000f7106000 to ffffff8009399000 [ 4.374655] ssp-pl022 f7106000.spi: setup for DMA on RX dma0chan0, TX dma0chan1 [ 4.384792] adv7511 2-0039: 2-0039 supply avdd not found, using dummy regulator [ 4.392225] adv7511 2-0039: 2-0039 supply dvdd not found, using dummy regulator [ 4.399606] adv7511 2-0039: 2-0039 supply pvdd not found, using dummy regulator [ 4.406997] adv7511 2-0039: 2-0039 supply a2vdd not found, using dummy regulator [ 4.414459] adv7511 2-0039: 2-0039 supply v3p3 not found, using dummy regulator [ 4.421834] adv7511 2-0039: 2-0039 supply v1p2 not found, using dummy regulator [ 4.445849] kirin-drm f4100000.ade: bound f4107800.dsi (ops 0xffffff8008af4bf0) [ 4.453214] [drm] Supports vblank timestamp caching Rev 2 (21.10.2013). [ 4.459857] [drm] No driver support for vblank timestamp query. [ 4.535736] random: fast init done [ 4.550171] Checking mode 1920x1080@60 clock: 148500... [ 4.550290] OK - whitelist [ 4.558278] Checking mode 1280x720@60 clock: 74250... [ 4.558356] OK - whitelist [ 4.566180] Checking mode 1920x1080@50 clock: 148500... [ 4.566257] OK - whitelist [ 4.574220] Checking mode 720x480@60 clock: 27000... [ 4.574298] BAD [ 4.581032] Checking mode 1680x1050@60 clock: 119000... [ 4.581108] BAD [ 4.588103] Checking mode 1600x1200@60 clock: 162000... [ 4.588178] BAD [ 4.595186] Checking mode 1440x900@60 clock: 88750... [ 4.595266] BAD [ 4.602100] Checking mode 1400x1050@60 clock: 101000... [ 4.602176] BAD [ 4.609171] Checking mode 1280x1024@60 clock: 108000... [ 4.609251] BAD [ 4.616244] Checking mode 1280x960@60 clock: 108000... [ 4.616320] BAD [ 4.623241] Checking mode 1152x864@75 clock: 108000... [ 4.623317] BAD [ 4.630237] Checking mode 800x600@60 clock: 40000... [ 4.630279] OK - clocks match! [ 4.638329] Checking mode 800x600@56 clock: 36000... [ 4.638376] OK - clocks match! [ 4.646426] Checking mode 640x480@75 clock: 31500... [ 4.646508] BAD [ 4.653242] Checking mode 640x480@73 clock: 31500... [ 4.653319] BAD [ 4.660052] Checking mode 640x480@67 clock: 30240... [ 4.660133] BAD [ 4.666879] Checking mode 640x480@60 clock: 25175... [ 4.666956] BAD [ 4.673690] Checking mode 720x400@70 clock: 28320... [ 4.673766] BAD [ 4.680500] Checking mode 1280x1024@75 clock: 135000... [ 4.680581] BAD [ 4.687587] Checking mode 1024x768@75 clock: 78750... [ 4.687668] BAD [ 4.694502] Checking mode 1024x768@70 clock: 75000... [ 4.694582] OK - whitelist [ 4.702370] Checking mode 1024x768@60 clock: 65000... [ 4.702446] BAD [ 4.709267] Checking mode 832x624@75 clock: 57284... [ 4.709343] BAD [ 4.716076] Checking mode 800x600@75 clock: 49500... [ 4.716157] BAD [ 4.722904] Checking mode 800x600@72 clock: 50000... [ 4.722980] BAD [ 4.729714] Checking mode 1440x480@60 clock: 54000... [ 4.729790] BAD [ 4.736610] Checking mode 1440x576@50 clock: 54000... [ 4.736686] BAD [ 4.743520] Checking mode 1280x720@50 clock: 74250... [ 4.743596] OK - whitelist [ 4.751385] Checking mode 720x576@50 clock: 27000... [ 4.751461] BAD [ 4.758207] Checking mode 1920x1080@60 clock: 148352... [ 4.758283] BAD [ 4.765277] Checking mode 1280x720@60 clock: 74176... [ 4.765353] BAD [ 4.772171] Checking mode 720x480@60 clock: 27027... [ 4.772248] BAD [ 4.778993] Checking mode 640x480@60 clock: 25200... [ 4.779069] BAD [ 4.785803] Checking mode 1440x480@60 clock: 54054... [ 4.785879] BAD [ 4.797439] kirin-drm f4100000.ade: fb0: frame buffer device [ 4.803753] [drm] Initialized kirin 1.0.0 20150718 for f4100000.ade on minor 0 [ 4.811541] dwc2 f72c0000.usb: f72c0000.usb supply vusb_d not found, using dummy regulator [ 4.819963] dwc2 f72c0000.usb: f72c0000.usb supply vusb_a not found, using dummy regulator [ 4.962199] (stk) :ldisc installation timeout [ 4.962213] (stk) :ldisc_install = 0 [ 5.202365] dwc2 f72c0000.usb: dwc2_check_param_tx_fifo_sizes: Invalid parameter g_tx_fifo_size[7]=0 [ 5.215132] dwc2 f72c0000.usb: dwc2_check_param_tx_fifo_sizes: Invalid parameter g_tx_fifo_size[8]=0 [ 5.224293] dwc2 f72c0000.usb: dwc2_check_param_tx_fifo_sizes: Invalid parameter g_tx_fifo_size[9]=0 [ 5.233451] dwc2 f72c0000.usb: dwc2_check_param_tx_fifo_sizes: Invalid parameter g_tx_fifo_size[10]=0 [ 5.242695] dwc2 f72c0000.usb: dwc2_check_param_tx_fifo_sizes: Invalid parameter g_tx_fifo_size[11]=0 [ 5.251940] dwc2 f72c0000.usb: dwc2_check_param_tx_fifo_sizes: Invalid parameter g_tx_fifo_size[12]=0 [ 5.261183] dwc2 f72c0000.usb: dwc2_check_param_tx_fifo_sizes: Invalid parameter g_tx_fifo_size[13]=0 [ 5.270428] dwc2 f72c0000.usb: dwc2_check_param_tx_fifo_sizes: Invalid parameter g_tx_fifo_size[14]=0 [ 5.279671] dwc2 f72c0000.usb: dwc2_check_param_tx_fifo_sizes: Invalid parameter g_tx_fifo_size[15]=0 [ 5.288961] dwc2 f72c0000.usb: EPs: 16, dedicated fifos, 1920 entries in SPRAM [ 5.296279] alloc_contig_range: [78047, 78048) PFNs busy [ 5.301768] alloc_contig_range: [78047, 78048) PFNs busy [ 5.307188] alloc_contig_range: [78047, 78048) PFNs busy [ 5.312602] alloc_contig_range: [78047, 78048) PFNs busy [ 5.318344] alloc_contig_range: [78047, 78048) PFNs busy [ 5.323758] dwc2 f72c0000.usb: DWC OTG Controller [ 5.328516] dwc2 f72c0000.usb: new USB bus registered, assigned bus number 1 [ 5.335625] dwc2 f72c0000.usb: irq 39, io mem 0xf72c0000 [ 5.341702] hub 1-0:1.0: USB hub found [ 5.345517] hub 1-0:1.0: 1 port detected [ 5.351199] dwmmc_k3 f723f000.dwmmc2: fifo-depth property not found, using value of FIFOTH register as default [ 5.361367] dwmmc_k3 f723f000.dwmmc2: IDMAC supports 32-bit address mode. [ 5.368224] alloc_contig_range: [78047, 78048) PFNs busy [ 5.373668] dwmmc_k3 f723f000.dwmmc2: Using internal DMA controller. [ 5.380065] dwmmc_k3 f723f000.dwmmc2: Version ID is 250a [ 5.385428] dwmmc_k3 f723f000.dwmmc2: DW MMC controller at irq 43,32 bit host data width,64 deep fifo [ 5.394926] mmc_host mmc2: card is non-removable. [ 5.498377] mmc_host mmc2: Bus speed (slot 0) = 24800000Hz (slot req 400000Hz, actual 400000HZ div = 31) [ 5.526411] dwmmc_k3 f723f000.dwmmc2: 1 slots initialized [ 5.533231] hi6210_i2s f7118000.i2s: Failed to get DMA channel capabilities, falling back to period counting: -6 [ 5.543446] asoc-simple-card sound: hdmi-hifi.0 <-> f7118000.i2s mapping ok [ 5.555160] rtc-pl031 f8003000.rtc: setting system clock to 1970-01-01 00:00:10 UTC (10) [ 5.558119] dwmmc_k3 f723f000.dwmmc2: card claims to support voltages below defined range [ 5.569223] mmc_host mmc2: Bus speed (slot 0) = 24800000Hz (slot req 25000000Hz, actual 24800000HZ div = 0) [ 5.572918] mmc2: new SDIO card at address 0001 [ 5.574244] wl18xx_driver wl18xx.3.auto: Direct firmware load for ti-connectivity/wl18xx-conf.bin failed with error -2 [ 5.574252] wl18xx_driver wl18xx.3.auto: Falling back to user helper [ 5.603286] LDO2_2V8: disabling [ 5.606463] LDO7_SDIO: disabling [ 5.609707] LDO10_2V85: disabling [ 5.613056] LDO13_1V8: disabling [ 5.616313] LDO14_2V8: disabling [ 5.619575] LDO17_2V5: disabling [ 5.622836] ALSA device list: [ 5.625809] #0: hikey-hdmi [ 5.629048] uart-pl011 f7113000.uart: no DMA platform data [ 5.634934] Freeing unused kernel memory: 576K [ 5.643459] init: init first stage started! [ 5.647906] init: Early mount skipped (missing/incompatible fstab in device tree) [ 5.655442] init: Loading SELinux policy [ 5.668331] SELinux: 4096 avtab hash slots, 8206 rules. [ 5.676084] SELinux: 4096 avtab hash slots, 8206 rules. [ 5.676104] SELinux: 1 users, 4 roles, 1710 types, 0 bools, 1 sens, 1024 cats [ 5.676127] SELinux: 90 classes, 8206 rules [ 5.681059] SELinux: Permission validate_trans in class security not defined in policy. [ 5.689721] SELinux: Permission cgroup in class capability2 not defined in policy. [ 5.697442] SELinux: Permission cgroup in class cap2_userns not defined in policy. [ 5.705351] SELinux: Class smc_socket not defined in policy. [ 5.711119] SELinux: the above unknown classes and permissions will be denied [ 5.718309] SELinux: Completing initialization. [ 5.718317] SELinux: Setting up existing superblocks. [ 5.764118] selinux: SELinux: Loaded policy from /sepolicy\x0a [ 5.800275] selinux: SELinux: Loaded file_contexts\x0a [ 5.813735] init: init second stage started! [ 5.836979] selinux: SELinux: Loaded file_contexts\x0a [ 5.844232] selinux: SELinux: Loaded property_contexts from /plat_property_contexts & /nonplat_property_contexts.\x0a [ 5.856045] init: Running restorecon... [ 5.986031] (stk) : timed out waiting for ldisc to be un-installed [ 6.093064] (stk) :ldisc_install = 1 [ 6.163271] selinux: SELinux: Could not stat /dev/block: No such file or directory.\x0a [ 6.176457] init: waitpid failed: No child processes [ 6.181795] init: Couldn't load properties from /odm/default.prop: No such file or directory [ 6.190349] init: Couldn't load properties from /vendor/default.prop: No such file or directory [ 6.200380] init: Created socket '/dev/socket/property_service', mode 666, user 0, group 0 [ 6.208807] init: Parsing file /init.rc... [ 6.233465] ueventd: ueventd started! [ 6.238074] ueventd: /sys/ rule /sys/devices/platform/trusty.* trusty_version [ 6.245259] ueventd: /sys/ rule /sys/devices/virtual/input/input* enable [ 6.252014] ueventd: /sys/ rule /sys/devices/virtual/input/input* poll_delay [ 6.259108] ueventd: /sys/ rule /sys/devices/virtual/usb_composite/* enable [ 6.266119] ueventd: /sys/ rule /sys/devices/system/cpu/cpu* cpufreq/scaling_max_freq [ 6.274009] ueventd: /sys/ rule /sys/devices/system/cpu/cpu* cpufreq/scaling_min_freq [ 6.289627] selinux: SELinux: Loaded file_contexts\x0a [ 6.300311] [drm:ade_ldi_set_mode.isra.10] *ERROR* failed to set pixel clk 0Hz (-22) [ 6.309118] selinux: SELinux: Loaded file_contexts\x0a [ 6.403195] ueventd: firmware: loading 'ti-connectivity/wl18xx-conf.bin' for '/devices/platform/soc/f723f000.dwmmc2/mmc_host/mmc2/mmc2:0001/mmc2:0001:2/wl18xx.3.auto/firmware/ti-connectivity!wl18xx-conf.bin' [ 6.576123] Checking mode 1920x1080@60 clock: 148500... [ 6.576223] OK - whitelist [ 6.584221] Checking mode 1280x720@60 clock: 74250... [ 6.584298] OK - whitelist [ 6.592094] Checking mode 1920x1080@50 clock: 148500... [ 6.592170] OK - whitelist [ 6.600137] Checking mode 720x480@60 clock: 27000... [ 6.600215] BAD [ 6.606966] Checking mode 1680x1050@60 clock: 119000... [ 6.607042] BAD [ 6.614054] Checking mode 1600x1200@60 clock: 162000... [ 6.614130] BAD [ 6.621129] Checking mode 1440x900@60 clock: 88750... [ 6.621212] BAD [ 6.628033] Checking mode 1400x1050@60 clock: 101000... [ 6.628109] BAD [ 6.635121] Checking mode 1280x1024@60 clock: 108000... [ 6.635201] BAD [ 6.642212] Checking mode 1280x960@60 clock: 108000... [ 6.642289] BAD [ 6.649201] Checking mode 1152x864@75 clock: 108000... [ 6.649277] BAD [ 6.656184] Checking mode 800x600@60 clock: 40000... [ 6.656226] OK - clocks match! [ 6.664279] Checking mode 800x600@56 clock: 36000... [ 6.664325] OK - clocks match! [ 6.672386] Checking mode 640x480@75 clock: 31500... [ 6.672467] BAD [ 6.679218] Checking mode 640x480@73 clock: 31500... [ 6.679294] BAD [ 6.686045] Checking mode 640x480@67 clock: 30240... [ 6.686126] BAD [ 6.692864] Checking mode 640x480@60 clock: 25175... [ 6.692941] BAD [ 6.699693] Checking mode 720x400@70 clock: 28320... [ 6.699769] BAD [ 6.706519] Checking mode 1280x1024@75 clock: 135000... [ 6.706600] BAD [ 6.713599] Checking mode 1024x768@75 clock: 78750... [ 6.713679] BAD [ 6.720508] Checking mode 1024x768@70 clock: 75000... [ 6.720588] OK - whitelist [ 6.728381] Checking mode 1024x768@60 clock: 65000... [ 6.728457] BAD [ 6.735299] Checking mode 832x624@75 clock: 57284... [ 6.735375] BAD [ 6.742124] Checking mode 800x600@75 clock: 49500... [ 6.742205] BAD [ 6.748938] Checking mode 800x600@72 clock: 50000... [ 6.749015] BAD [ 6.755751] Checking mode 1440x480@60 clock: 54000... [ 6.755827] BAD [ 6.762669] Checking mode 1440x576@50 clock: 54000... [ 6.762745] BAD [ 6.769567] Checking mode 1280x720@50 clock: 74250... [ 6.769644] OK - whitelist [ 6.777427] Checking mode 720x576@50 clock: 27000... [ 6.777503] BAD [ 6.784239] Checking mode 1920x1080@60 clock: 148352... [ 6.784315] BAD [ 6.791335] Checking mode 1280x720@60 clock: 74176... [ 6.791412] BAD [ 6.798248] Checking mode 720x480@60 clock: 27027... [ 6.798325] BAD [ 6.805061] Checking mode 640x480@60 clock: 25200... [ 6.805138] BAD [ 6.811873] Checking mode 1440x480@60 clock: 54054... [ 6.811950] BAD [ 6.986736] EXT4-fs (mmcblk0p9): mounted filesystem with ordered data mode. Opts: (null) [ 6.999051] EXT4-fs (mmcblk0p8): Ignoring removed nomblk_io_submit option [ 7.069507] EXT4-fs (mmcblk0p8): warning: maximal mount count reached, running e2fsck is recommended [ 7.079979] EXT4-fs (mmcblk0p8): recovery complete [ 7.086044] EXT4-fs (mmcblk0p8): mounted filesystem with ordered data mode. Opts: errors=remount-ro,nomblk_io_submit [ 7.106153] (stk) :ldisc installation timeout [ 7.106160] (stk) :ldisc_install = 0 [ 7.271251] e2fsck: e2fsck 1.43.3 (04-Sep-2016)\x0a [ 7.280936] e2fsck: /system/bin/e2fsck: Permission denied while trying to open /dev/block/platform/soc/f723d000.dwmmc0/by-name/cache\x0a [ 7.294345] e2fsck: \x0a [ 7.298027] e2fsck: You must have r/w access to the filesystem or be root\x0a [ 7.306341] e2fsck: e2fsck terminated by exit(8)\x0a [ 7.319100] wlcore: wl18xx HW: 183x or 180x, PG 2.2 (ROM 0x11) [ 7.321450] EXT4-fs (mmcblk0p8): warning: maximal mount count reached, running e2fsck is recommended [ 7.322306] EXT4-fs (mmcblk0p8): mounted filesystem with ordered data mode. Opts: discard,noauto_da_alloc,data=ordered,user_xattr,discard,barrier=1 [ 7.324196] EXT4-fs (mmcblk0p10): Ignoring removed nomblk_io_submit option [ 7.360128] wlcore: loaded [ 7.628202] EXT4-fs (mmcblk0p10): warning: maximal mount count reached, running e2fsck is recommended [ 7.639326] EXT4-fs (mmcblk0p10): recovery complete [ 7.645570] EXT4-fs (mmcblk0p10): mounted filesystem with ordered data mode. Opts: errors=remount-ro,nomblk_io_submit [ 7.744512] e2fsck: e2fsck 1.43.3 (04-Sep-2016)\x0a [ 7.750702] e2fsck: /system/bin/e2fsck: Permission denied while trying to open /dev/block/platform/soc/f723d000.dwmmc0/by-name/userdata\x0a [ 7.764439] e2fsck: \x0a [ 7.768180] e2fsck: You must have r/w access to the filesystem or be root\x0a [ 7.776532] e2fsck: e2fsck terminated by exit(8)\x0a [ 7.795636] EXT4-fs (mmcblk0p10): warning: maximal mount count reached, running e2fsck is recommended [ 7.807771] EXT4-fs (mmcblk0p10): mounted filesystem with ordered data mode. Opts: discard,noauto_da_alloc,data=ordered,user_xattr,discard,barrier=1 [ 7.974629] audit: type=2000 audit(1.607:1): state=initialized audit_enabled=0 res=1 [ 7.982492] audit: type=1403 audit(10.703:2): policy loaded auid=4294967295 ses=4294967295 [ 7.990840] audit: type=1404 audit(10.715:3): enforcing=1 old_enforcing=0 auid=4294967295 ses=4294967295 [ 8.000376] audit: type=1400 audit(11.907:4): avc: denied { create } for pid=1 comm="init" name="cpu.rt_period_us" scontext=u:r:init:s0 tcontext=u:object_r:cgroup:s0 tclass=file permissive=0 [ 8.017665] audit: type=1400 audit(11.907:5): avc: denied { create } for pid=1 comm="init" name="cpu.rt_runtime_us" scontext=u:r:init:s0 tcontext=u:object_r:cgroup:s0 tclass=file permissive=0 [ 8.035025] audit: type=1400 audit(11.907:6): avc: denied { create } for pid=1 comm="init" name="cpus" scontext=u:r:init:s0 tcontext=u:object_r:cgroup:s0 tclass=file permissive=0 [ 8.051275] audit: type=1400 audit(11.907:7): avc: denied { create } for pid=1 comm="init" name="mems" scontext=u:r:init:s0 tcontext=u:object_r:cgroup:s0 tclass=file permissive=0 [ 8.067510] audit: type=1400 audit(11.907:8): avc: denied { create } for pid=1 comm="init" name="cpus" scontext=u:r:init:s0 tcontext=u:object_r:cgroup:s0 tclass=file permissive=0 [ 8.083739] audit: type=1400 audit(11.907:9): avc: denied { create } for pid=1 comm="init" name="mems" scontext=u:r:init:s0 tcontext=u:object_r:cgroup:s0 tclass=file permissive=0 [ 8.099964] audit: type=1400 audit(11.907:10): avc: denied { create } for pid=1 comm="init" name="cpus" scontext=u:r:init:s0 tcontext=u:object_r:cgroup:s0 tclass=file permissive=0 [ 8.116463] logd.auditd: start [ 8.119605] logd.klogd: 8113598332 [ 8.130156] (stk) : timed out waiting for ldisc to be un-installed [ 8.237190] (stk) :ldisc_install = 1 [ 8.683448] vdc: 200 1850 Command succeeded [ 8.804318] logd.daemon: reinit [ 8.806599] binder: 1902:1902 transaction failed 29189, size 0-0 [ 8.810352] file system registered [ 8.812762] type=1400 audit(13.747:22): avc: denied { create } for pid=1 comm="init" name="idVendor" scontext=u:r:init:s0 tcontext=u:object_r:configfs:s0 tclass=file permissive=0 [ 8.831538] type=1400 audit(13.747:22): avc: denied { create } for pid=1 comm="init" name="idVendor" scontext=u:r:init:s0 tcontext=u:object_r:configfs:s0 tclass=file permissive=0 [ 8.831555] type=1400 audit(13.747:23): avc: denied { create } for pid=1 comm="init" name="bcdDevice" scontext=u:r:init:s0 tcontext=u:object_r:configfs:s0 tclass=file permissive=0 [ 8.831713] type=1400 audit(13.747:23): avc: denied { create } for pid=1 comm="init" name="bcdDevice" scontext=u:r:init:s0 tcontext=u:object_r:configfs:s0 tclass=file permissive=0 [ 8.831726] type=1400 audit(13.747:24): avc: denied { create } for pid=1 comm="init" name="bcdUSB" scontext=u:r:init:s0 tcontext=u:object_r:configfs:s0 tclass=file permissive=0 [ 8.831871] type=1400 audit(13.747:24): avc: denied { create } for pid=1 comm="init" name="bcdUSB" scontext=u:r:init:s0 tcontext=u:object_r:configfs:s0 tclass=file permissive=0 [ 8.831884] type=1400 audit(13.747:25): avc: denied { create } for pid=1 comm="init" name="manufacturer" scontext=u:r:init:s0 tcontext=u:object_r:configfs:s0 tclass=file permissive=0 [ 8.880848] read descriptors [ 8.880872] read strings [ 8.895879] uart-pl011 f7111000.uart: no DMA platform data [ 8.944157] dwc2 f72c0000.usb: bound driver configfs-gadget [ 8.946370] (stc): st_tty_open [ 8.946407] (stk) :line discipline installed [ 8.946818] (stk) :ti-connectivity/TIInit_11.8.32.bts [ 8.957360] insufficient fifo memory [ 8.962471] ------------[ cut here ]------------ [ 8.970680] WARNING: CPU: 6 PID: 1 at drivers/usb/dwc2/gadget.c:330 dwc2_hsotg_init_fifo+0x154/0x1a0 [ 8.979817] [ 8.981314] CPU: 6 PID: 1 Comm: init Not tainted 4.11.0-rc5-00055-ga758cd1 #2467 [ 8.988712] Hardware name: HiKey Development Board (DT) [ 8.993938] task: ffffffc005f28000 task.stack: ffffffc005f30000 [ 8.999868] PC is at dwc2_hsotg_init_fifo+0x154/0x1a0 [ 9.004925] LR is at dwc2_hsotg_init_fifo+0x154/0x1a0 [ 9.009979] pc : [] lr : [] pstate: 800001c5 [ 9.010622] (stk) :change remote baud rate command in firmware [ 9.010630] (stk) :skipping the wait event of change remote baud [ 9.023204] sp : ffffffc005f33be0 [ 9.032521] x29: ffffffc005f33be0 x28: ffffffc005f28000 [ 9.037842] x27: ffffff8008a72000 x26: 0000000000000001 [ 9.043162] x25: ffffff8008c92dd0 x24: ffffff8008e102e6 [ 9.048481] x23: 0000000008000580 x22: 0000000000000580 [ 9.053800] x21: ffffffc074ca4098 x20: ffffffc074ca4018 [ 9.059119] x19: 000000000000011c x18: 0000000000000010 [ 9.064437] x17: 000000000000001e x16: ffffff80081d9598 [ 9.069756] x15: ffffff8088e3839f x14: 0000000000000006 [ 9.075074] x13: ffffff8008e383ad x12: ffffff8008db8860 [ 9.080392] x11: 0000000000000000 x10: 0000000005f5e0ff [ 9.085711] x9 : 0000000000000039 x8 : ffffff80083c46c0 [ 9.091029] x7 : ffffff8008dc9670 x6 : 000000000000030d [ 9.096347] x5 : ffffff8009020000 x4 : 0000000000000001 [ 9.101665] x3 : 0000000000000002 x2 : 0000000000000002 [ 9.106983] x1 : 0000000000000001 x0 : 0000000000000018 [ 9.112301] [ 9.113791] ---[ end trace 951648b891fc652b ]--- [ 9.118410] Call trace: [ 9.120860] Exception stack(0xffffffc005f33a10 to 0xffffffc005f33b40) [ 9.127304] 3a00: 000000000000011c 0000008000000000 [ 9.135138] 3a20: ffffffc005f33be0 ffffff80086ae2ac ffffff8008c92dd0 0000000000000001 [ 9.142973] 3a40: ffffff8008a72000 ffffffc005f28000 ffffffc005f33a90 0000000000000000 [ 9.150806] 3a60: ffffffc005f33be0 ffffffc005f33be0 ffffffc005f33ba0 00000000ffffffc8 [ 9.158641] 3a80: ffffffc005f33ab0 ffffff8008106244 ffffffc005f33be0 ffffffc005f33be0 [ 9.166474] 3aa0: ffffffc005f33ba0 00000000ffffffc8 0000000000000018 0000000000000001 [ 9.174326] 3ac0: 0000000000000002 0000000000000002 0000000000000001 ffffff8009020000 [ 9.182171] 3ae0: 000000000000030d ffffff8008dc9670 ffffff80083c46c0 0000000000000039 [ 9.190011] 3b00: 0000000005f5e0ff 0000000000000000 ffffff8008db8860 ffffff8008e383ad [ 9.197853] 3b20: 0000000000000006 ffffff8088e3839f ffffff80081d9598 000000000000001e [ 9.205704] [] dwc2_hsotg_init_fifo+0x154/0x1a0 [ 9.211826] [] dwc2_hsotg_core_init_disconnected+0x7c/0x3d0 [ 9.218984] [] dwc2_hsotg_pullup+0x90/0x100 [ 9.224745] [] usb_udc_connect_control.isra.0+0x78/0x90 [ 9.231560] [] udc_bind_to_driver+0xc4/0xe8 [ 9.237345] [] usb_gadget_probe_driver+0xa0/0x150 [ 9.243649] [] gadget_dev_desc_UDC_store+0xe4/0x100 [ 9.250123] [] configfs_write_file+0xc0/0x198 [ 9.256068] [] __vfs_write+0x1c/0x100 [ 9.261318] [] vfs_write+0xa0/0x1b0 [ 9.266383] [] SyS_write+0x44/0xa0 [ 9.271374] [] el0_svc_naked+0x24/0x28 [ 9.507729] random: crng init done [ 9.534363] dwc2 f72c0000.usb: new device is high-speed [ 9.610066] dwc2 f72c0000.usb: new device is high-speed [ 9.666261] dwc2 f72c0000.usb: new address 95 [ 9.691547] configfs-gadget gadget: high-speed config #1: b [ 9.718355] Mali<2>: [ 9.718369] Session 0x7514E400 with pid 1905 was granted higher priority. [ 9.749401] (stc): add_channel_to_table: id 4 [ 9.753834] (stc): add_channel_to_table: id 2 [ 9.758222] (stc): add_channel_to_table: id 3 [ 9.809414] healthd: wakealarm_init: timerfd_create failed [ 9.815376] healthd: No battery devices found [ 11.778348] (stc): remove_channel_from_table: id 3 [ 11.783227] (stc): remove_channel_from_table: id 2 [ 11.788088] (stc): remove_channel_from_table: id 4 [ 11.795123] (stc): all chnl_ids unregistered [ 11.795198] (stk) :ldisc_install = 0 [ 11.801434] (stc): st_tty_close [ 15.120145] capability: warning: `main' uses 32-bit capabilities (legacy support in use) [ 22.160329] healthd: battery l=100 v=0 t=42.4 h=2 st=2 chg=a [ 22.655966] init: processing action (sys.sysctl.extra_free_kbytes=*) [ 22.662881] init: write_file: Unable to open '/proc/sys/vm/extra_free_kbytes': No such file or directory [ 24.479192] type=1400 audit(17.783:57): avc: denied { read } for pid=1909 comm="main" name="u:object_r:serialno_prop:s0" dev="tmpfs" ino=4180 scontext=u:r:zygote:s0 tcontext=u:object_r:serialno_prop:s0 tclass=file permissive=0 [ 24.499526] type=1400 audit(29.419:58): avc: granted { getattr } for pid=2103 comm="sdcard" path="/vendor" dev="rootfs" ino=2129 scontext=u:r:sdcardd:s0 tcontext=u:object_r:rootfs:s0 tclass=lnk_file [ 24.701986] type=1400 audit(29.419:58): avc: granted { getattr } for pid=2103 comm="sdcard" path="/vendor" dev="rootfs" ino=2129 scontext=u:r:sdcardd:s0 tcontext=u:object_r:rootfs:s0 tclass=lnk_file [ 24.720754] type=1400 audit(29.635:59): avc: granted { getattr } for pid=2159 comm="iptables-restor" path="/vendor" dev="rootfs" ino=2129 scontext=u:r:netd:s0 tcontext=u:object_r:rootfs:s0 tclass=lnk_file [ 24.724312] type=1400 audit(29.635:59): avc: granted { getattr } for pid=2159 comm="iptables-restor" path="/vendor" dev="rootfs" ino=2129 scontext=u:r:netd:s0 tcontext=u:object_r:rootfs:s0 tclass=lnk_file [ 24.724330] type=1400 audit(29.663:60): avc: granted { getattr } for pid=2176 comm="ip6tables-resto" path="/vendor" dev="rootfs" ino=2129 scontext=u:r:netd:s0 tcontext=u:object_r:rootfs:s0 tclass=lnk_file [ 24.769707] init: computing context for service 'wpa_supplicant' [ 24.770855] init: starting service 'wpa_supplicant'... [ 24.775246] init: Created socket '/dev/socket/wpa_wlan0', mode 660, user 1010, group 1010 [ 25.822078] mmc_host mmc2: Bus speed (slot 0) = 24800000Hz (slot req 400000Hz, actual 400000HZ div = 31) [ 25.868656] mmc_host mmc2: Bus speed (slot 0) = 24800000Hz (slot req 25000000Hz, actual 24800000HZ div = 0) [ 26.035281] type=1400 audit(29.663:60): avc: granted { getattr } for pid=2176 comm="ip6tables-resto" path="/vendor" dev="rootfs" ino=2129 scontext=u:r:netd:s0 tcontext=u:object_r:rootfs:s0 tclass=lnk_file [ 26.053908] type=1400 audit(30.975:61): avc: denied { write } for pid=2008 comm="Binder:2008_2" name="timerslack_ns" dev="proc" ino=7791 scontext=u:r:system_server:s0 tcontext=u:r:untrusted_app_25:s0:c512,c768 tclass=file permissive=0 [ 26.054251] type=1400 audit(30.975:61): avc: denied { write } for pid=2008 comm="Binder:2008_2" name="timerslack_ns" dev="proc" ino=7791 scontext=u:r:system_server:s0 tcontext=u:r:untrusted_app_25:s0:c512,c768 tclass=file permissive=0 [ 26.054264] type=1400 audit(30.975:62): avc: denied { write } for pid=2008 comm="Binder:2008_2" name="timerslack_ns" dev="proc" ino=7863 scontext=u:r:system_server:s0 tcontext=u:r:untrusted_app_25:s0:c512,c768 tclass=file permissive=0 [ 26.193215] wlcore: PHY firmware version: Rev 8.2.0.0.236 [ 26.254055] wlcore: firmware booted (Rev 8.9.0.0.69) [ 26.455635] (hci_tty): inside hci_tty_open (ffffffc074aad048, ffffffc051005c00) [ 26.455647] (stc): chnl_id list empty :4 [ 26.455651] (stk) : st_kim_start [ 26.560758] (stk) :ldisc_install = 1 [ 26.615668] (stc): st_tty_open [ 26.619638] (stk) :line discipline installed [ 26.620192] (stk) :ti-connectivity/TIInit_11.8.32.bts [ 26.620517] (stk) :change remote baud rate command in firmware [ 26.620522] (stk) :skipping the wait event of change remote baud [ 26.960047] init: Service 'bootanim' (pid 1959) exited with status 0 [ 27.148672] init: processing action (sys.boot_completed=1) [ 27.155702] init: processing action (sys.boot_completed=1 && sys.logbootcomplete=1) [ 27.164033] init: computing context for service 'exec 2 (/system/bin/bootstat)' [ 27.173627] init: starting service 'exec 2 (/system/bin/bootstat)'... [ 27.383076] (stc): add_channel_to_table: id 4 [ 27.387495] (stc): add_channel_to_table: id 2 [ 27.391893] (stc): add_channel_to_table: id 3 [ 28.357843] wlan0: authenticate with 04:a1:51:da:5b:a7 [ 28.367961] wlan0: send auth to 04:a1:51:da:5b:a7 (try 1/3) [ 28.385432] wlan0: authenticated [ 28.390299] wl18xx_driver wl18xx.3.auto wlan0: disabling HT as WMM/QoS is not supported by the AP [ 28.399302] wl18xx_driver wl18xx.3.auto wlan0: disabling VHT as WMM/QoS is not supported by the AP [ 28.414614] wlan0: associate with 04:a1:51:da:5b:a7 (try 1/3) [ 28.418935] wlan0: RX AssocResp from 04:a1:51:da:5b:a7 (capab=0x1411 status=0 aid=3) [ 28.426316] wlan0: associated [ 28.445922] wlcore: Association completed. [ 29.508217] type=1400 audit(30.975:72): avc: denied { write } for pid=2008 comm="Binder:2008_2" name="timerslack_ns" dev="proc" ino=7876 scontext=u:r:system_server:s0 tcontext=u:r:untrusted_app_25:s0:c512,c768 tclass=file permissive=0 [ 29.529170] type=1400 audit(34.447:73): avc: denied { create } for pid=2008 comm="WifiStateMachin" scontext=u:r:system_server:s0 tcontext=u:r:system_server:s0 tclass=icmp_socket permissive=0 [ 29.539643] type=1400 audit(34.447:73): avc: denied { create } for pid=2008 comm="WifiStateMachin" scontext=u:r:system_server:s0 tcontext=u:r:system_server:s0 tclass=icmp_socket permissive=0 [ 29.539656] type=1400 audit(34.479:74): avc: granted { getattr } for pid=2568 comm="iptables" path="/vendor" dev="rootfs" ino=2129 scontext=u:r:netd:s0 tcontext=u:object_r:rootfs:s0 tclass=lnk_file [ 29.555459] type=1400 audit(34.479:74): avc: granted { getattr } for pid=2568 comm="iptables" path="/vendor" dev="rootfs" ino=2129 scontext=u:r:netd:s0 tcontext=u:object_r:rootfs:s0 tclass=lnk_file [ 29.555472] type=1400 audit(34.495:75): avc: granted { getattr } for pid=2572 comm="ip6tables" path="/vendor" dev="rootfs" ino=2129 scontext=u:r:netd:s0 tcontext=u:object_r:rootfs:s0 tclass=lnk_file [ 29.570434] init: processing action (sys.sysctl.tcp_def_init_rwnd=*) [ 29.570721] init: write_file: Unable to open '/proc/sys/net/ipv4/tcp_default_init_rwnd': No such file or directory [ 29.825483] init: processing action (sys.sysctl.tcp_def_init_rwnd=*) [ 29.825655] init: write_file: Unable to open '/proc/sys/net/ipv4/tcp_default_init_rwnd': No such file or directory [ 29.830747] init: processing action (sys.sysctl.tcp_def_init_rwnd=*) [ 29.830873] init: write_file: Unable to open '/proc/sys/net/ipv4/tcp_default_init_rwnd': No such file or directory [ 30.636289] type=1400 audit(34.495:75): avc: granted { getattr } for pid=2572 comm="ip6tables" path="/vendor" dev="rootfs" ino=2129 scontext=u:r:netd:s0 tcontext=u:object_r:rootfs:s0 tclass=lnk_file [ 30.656131] type=1400 audit(35.575:76): avc: denied { write } for pid=2008 comm="Binder:2008_6" name="timerslack_ns" dev="proc" ino=8110 scontext=u:r:system_server:s0 tcontext=u:r:untrusted_app_25:s0:c512,c768 tclass=file permissive=0 [ 30.656431] type=1400 audit(35.575:76): avc: denied { write } for pid=2008 comm="Binder:2008_6" name="timerslack_ns" dev="proc" ino=8110 scontext=u:r:system_server:s0 tcontext=u:r:untrusted_app_25:s0:c512,c768 tclass=file permissive=0 [ 30.656445] type=1400 audit(35.575:77): avc: denied { write } for pid=2008 comm="Binder:2008_6" name="timerslack_ns" dev="proc" ino=10263 scontext=u:r:system_server:s0 tcontext=u:r:untrusted_app_25:s0:c512,c768 tclass=file permissive=0 [ 183.046591] wlcore: ERROR SW watchdog interrupt received! starting recovery. [ 183.054109] ------------[ cut here ]------------ [ 183.058832] WARNING: CPU: 3 PID: 1820 at drivers/net/wireless/ti/wlcore/main.c:796 wl12xx_queue_recovery_work.part.24+0x58/0x60 [ 183.070363] [ 183.071921] CPU: 3 PID: 1820 Comm: irq/59-wl18xx Tainted: G W 4.11.0-rc5-00055-ga758cd1 #2467 [ 183.081627] Hardware name: HiKey Development Board (DT) [ 183.086905] task: ffffffc075243e80 task.stack: ffffffc07319c000 [ 183.092886] PC is at wl12xx_queue_recovery_work.part.24+0x58/0x60 [ 183.099039] LR is at wlcore_irq+0x178/0x180 [ 183.103275] pc : [] lr : [] pstate: 60000145 [ 183.110721] sp : ffffffc07319fd50 [ 183.114084] x29: ffffffc07319fd50 x28: ffffff8008dbe000 [ 183.119491] x27: ffffff8008107000 x26: 0000000000000001 [ 183.124897] x25: ffffffc075243e80 x24: ffffff80081079f0 [ 183.130302] x23: ffffffc0738a5780 x22: ffffffc0738a5558 [ 183.135710] x21: ffffffc0738a5578 x20: ffffffc0738a5540 [ 183.141114] x19: ffffffc0738a5500 x18: 0000000000000010 [ 183.146520] x17: 0000000000000000 x16: 0000000000000000 [ 183.151925] x15: ffffff8088e3839f x14: 0000000000000006 [ 183.157330] x13: ffffff8008e383ad x12: ffffff8008db8860 [ 183.162734] x11: 0000000000000000 x10: 0000000005f5e0ff [ 183.168140] x9 : 0000000000000050 x8 : ffffff80083c46c0 [ 183.173546] x7 : ffffff8008dc9670 x6 : ffffffc077f58090 [ 183.178952] x5 : 0000000000000000 x4 : 000000406f1fa000 [ 183.184355] x3 : 0000000000000001 x2 : 0000000000000001 [ 183.189759] x1 : 0000000000000000 x0 : 0000000000000005 [ 183.195157] [ 183.196696] ---[ end trace 951648b891fc652c ]--- [ 183.201362] Call trace: [ 183.203864] Exception stack(0xffffffc07319fb80 to 0xffffffc07319fcb0) [ 183.210370] fb80: ffffffc0738a5500 0000008000000000 ffffffc07319fd50 ffffff8008647490 [ 183.218265] fba0: ffffffc07319fca0 00000000ffffffc8 ffffffc07319fc50 ffffff8008162c3c [ 183.226159] fbc0: 00000000fffffffb 0000000000000200 ffffffc051f28a80 000000000000002c [ 183.234054] fbe0: ffffffc0738a6788 ffffffc0738a5680 ffffffc07319fce0 ffffffc07319fce0 [ 183.241949] fc00: ffffffc07319fca0 00000000ffffffc8 ffffffc07319fc20 ffffff8008a56900 [ 183.249837] fc20: 0000000000000005 0000000000000000 0000000000000001 0000000000000001 [ 183.257731] fc40: 000000406f1fa000 0000000000000000 ffffffc077f58090 ffffff8008dc9670 [ 183.265623] fc60: ffffff80083c46c0 0000000000000050 0000000005f5e0ff 0000000000000000 [ 183.273517] fc80: ffffff8008db8860 ffffff8008e383ad 0000000000000006 ffffff8088e3839f [ 183.281403] fca0: 0000000000000000 0000000000000000 [ 183.286309] [] wl12xx_queue_recovery_work.part.24+0x58/0x60 [ 183.293455] [] wlcore_irq+0x178/0x180 [ 183.298693] [] irq_thread_fn+0x28/0x68 [ 183.304015] [] irq_thread+0x124/0x1e0 [ 183.309252] [] kthread+0xf0/0x120 [ 183.314140] [] ret_from_fork+0x10/0x50 [ 183.319638] wlcore: Hardware recovery in progress. FW ver: Rev 8.9.0.0.69 [ 183.326851] wlcore: pc: 0x3966, hint_sts: 0x00000000 count: 1 [ 183.332864] wlcore: down [ 183.335442] wlcore: down [ 183.339187] ieee80211 phy0: Hardware restart was requested [ 183.470528] mmc_host mmc2: Bus speed (slot 0) = 24800000Hz (slot req 400000Hz, actual 400000HZ div = 31) [ 183.517390] mmc_host mmc2: Bus speed (slot 0) = 24800000Hz (slot req 25000000Hz, actual 24800000HZ div = 0) [ 183.828244] wlcore: PHY firmware version: Rev 8.2.0.0.236 [ 183.883674] wlcore: firmware booted (Rev 8.9.0.0.69) [ 183.917004] wlcore: Association completed. [ 1030.660243] ttyAMA ttyAMA3: 1 input overrun(s) [ 1035.174834] dwc2 f72c0000.usb: Set speed to high-speed [ 1035.180181] usb 1-1: new high-speed USB device number 2 using dwc2 [ 1035.366801] dwc2 f72c0000.usb: Set speed to high-speed [ 1035.393686] hub 1-1:1.0: USB hub found [ 1035.397800] hub 1-1:1.0: 3 ports detected [ 1035.690180] dwc2 f72c0000.usb: Set speed to full-speed [ 1035.695597] usb 1-1.1: new low-speed USB device number 3 using dwc2 [ 1036.054466] usb 1-1: USB disconnect, device number 2 [ 1041.194420] dwc2 f72c0000.usb: Set speed to full-speed [ 1041.199744] usb 1-1: new full-speed USB device number 7 using dwc2 [ 1041.386419] dwc2 f72c0000.usb: Set speed to full-speed [ 1041.410929] usb 1-1: not running at top speed; connect to a high speed hub [ 1041.421988] hub 1-1:1.0: USB hub found [ 1041.426262] hub 1-1:1.0: 3 ports detected [ 1041.718572] dwc2 f72c0000.usb: Set speed to full-speed [ 1041.723914] usb 1-1.1: new low-speed USB device number 8 using dwc2 [ 1041.810468] dwc2 f72c0000.usb: Set speed to full-speed [ 1041.856908] input: Logitech USB Optical Mouse as /devices/platform/soc/f72c0000.usb/usb1/1-1/1-1.1/1-1.1:1.0/0003:046D:C058.0001/input/input1 [ 1041.871227] hid-generic 0003:046D:C058.0001: input,hidraw0: USB HID v1.11 Mouse [Logitech USB Optical Mouse] on usb-f72c0000.usb-1.1/input0 [ 1041.970194] dwc2 f72c0000.usb: Set speed to full-speed [ 1041.975528] usb 1-1.2: new full-speed USB device number 9 using dwc2 [ 1042.062599] dwc2 f72c0000.usb: Set speed to full-speed [ 1042.089631] usb 1-1.2: not running at top speed; connect to a high speed hub [ 1042.566084] asix 1-1.2:1.0 eth0: register 'asix' at usb-f72c0000.usb-1.2, ASIX AX88772B USB 2.0 Ethernet, 00:50:b6:18:82:98 [ 1042.578670] IPv6: ADDRCONF(NETDEV_UP): eth0: link is not ready [ 1044.126712] IPv6: ADDRCONF(NETDEV_CHANGE): eth0: link becomes ready [ 1044.146683] asix 1-1.2:1.0 eth0: link up, 100Mbps, full-duplex, lpa 0xCDE1 [ 1045.412007] init: processing action (sys.sysctl.tcp_def_init_rwnd=*) [ 1045.419835] init: write_file: Unable to open '/proc/sys/net/ipv4/tcp_default_init_rwnd': No such file or directory [ 1075.405883] wlan0: deauthenticating from 04:a1:51:da:5b:a7 by local choice (Reason: 3=DEAUTH_LEAVING) [ 1075.475633] type=1400 audit(35.887:95): avc: denied { write } for pid=2008 comm="Binder:2008_4" name="timerslack_ns" dev="proc" ino=8146 scontext=u:r:system_server:s0 tcontext=u:r:untrusted_app_25:s0:c512,c768 tclass=file permissive=0 [ 1075.496715] type=1400 audit(1491331974.090:96): avc: denied { write } for pid=2181 comm="wpa_supplicant" name="drop_unicast_in_l2_multicast" dev="proc" ino=12830 scontext=u:r:hal_wifi_supplicant_default:s0 tcontext=u:object_r:proc_net:s0 tclass=file permissive=0 [ 1077.031295] dwc2 f72c0000.usb: Mode Mismatch Interrupt: currently in Host mode [ 1077.038704] dwc2 f72c0000.usb: Mode Mismatch Interrupt: currently in Host mode [ 1087.286176] dwc2 f72c0000.usb: Mode Mismatch Interrupt: currently in Host mode [ 1087.293562] dwc2 f72c0000.usb: Mode Mismatch Interrupt: currently in Host mode [ 1105.234826] type=1400 audit(1491331974.094:97): avc: denied { write } for pid=2181 comm="wpa_supplicant" name="drop_unicast_in_l2_multicast" dev="proc" ino=12830 scontext=u:r:hal_wifi_supplicant_default:s0 tcontext=u:object_r:proc_net:s0 tclass=file permissive=0 [ 1105.258646] type=1400 audit(1491332003.850:98): avc: denied { write } for pid=2008 comm="Binder:2008_1" name="timerslack_ns" dev="proc" ino=15451 scontext=u:r:system_server:s0 tcontext=u:r:untrusted_app_25:s0:c512,c768 tclass=file permissive=0 [ 1105.259092] type=1400 audit(1491332003.850:98): avc: denied { write } for pid=2008 comm="Binder:2008_1" name="timerslack_ns" dev="proc" ino=15451 scontext=u:r:system_server:s0 tcontext=u:r:untrusted_app_25:s0:c512,c768 tclass=file permissive=0 [ 1105.259116] type=1400 audit(1491332003.854:99): avc: denied { write } for pid=2008 comm="Binder:2008_1" name="timerslack_ns" dev="proc" ino=4952 scontext=u:r:system_server:s0 tcontext=u:r:untrusted_app_25:s0:c512,c768 tclass=file permissive=0 [ 1105.259386] type=1400 audit(1491332003.854:99): avc: denied { write } for pid=2008 comm="Binder:2008_1" name="timerslack_ns" dev="proc" ino=4952 scontext=u:r:system_server:s0 tcontext=u:r:untrusted_app_25:s0:c512,c768 tclass=file permissive=0 [ 1105.259409] type=1400 audit(1491332003.854:100): avc: denied { write } for pid=2008 comm="Binder:2008_1" name="timerslack_ns" dev="proc" ino=4954 scontext=u:r:system_server:s0 tcontext=u:r:untrusted_app_25:s0:c512,c768 tclass=file permissive=0 [ 1105.259686] type=1400 audit(1491332003.854:100): avc: denied { write } for pid=2008 comm="Binder:2008_1" name="timerslack_ns" dev="proc" ino=4954 scontext=u:r:system_server:s0 tcontext=u:r:untrusted_app_25:s0:c512,c768 tclass=file permissive=0 [ 1105.259709] type=1400 audit(1491332003.854:101): avc: denied { write } for pid=2008 comm="Binder:2008_1" name="timerslack_ns" dev="proc" ino=4956 scontext=u:r:system_server:s0 tcontext=u:r:untrusted_app_25:s0:c512,c768 tclass=file permissive=0 [ 1105.259958] type=1400 audit(1491332003.854:101): avc: denied { write } for pid=2008 comm="Binder:2008_1" name="timerslack_ns" dev="proc" ino=4956 scontext=u:r:system_server:s0 tcontext=u:r:untrusted_app_25:s0:c512,c768 tclass=file permissive=0 [ 1105.259981] type=1400 audit(1491332003.854:102): avc: denied { write } for pid=2008 comm="Binder:2008_1" name="timerslack_ns" dev="proc" ino=4958 scontext=u:r:system_server:s0 tcontext=u:r:untrusted_app_25:s0:c512,c768 tclass=file permissive=0 [ 1192.787903] dwc2 f72c0000.usb: dwc2_hc_chhltd_intr_dma: Channel 0 - ChHltd set, but reason is unknown [ 1192.787918] dwc2 f72c0000.usb: hcint 0x00000002, intsts 0x04200021 [ 1194.041963] asix 1-1.2:1.0 eth0: asix_rx_fixup() Bad Header Length 0xe5437b55, offset 68 [ 1241.542042] dwc2 f72c0000.usb: dwc2_hc_chhltd_intr_dma: Channel 15 - ChHltd set, but reason is unknown [ 1241.551398] dwc2 f72c0000.usb: hcint 0x00000002, intsts 0x04200029 [ 1242.162316] asix 1-1.2:1.0 eth0: asix_rx_fixup() Bad Header Length 0x1581109f, offset 68 [ 1345.285674] dwc2 f72c0000.usb: dwc2_hc_chhltd_intr_dma: Channel 10 - ChHltd set, but reason is unknown [ 1345.295037] dwc2 f72c0000.usb: hcint 0x00000002, intsts 0x06200029 [ 1345.403266] dwc2 f72c0000.usb: dwc2_hc_chhltd_intr_dma: Channel 1 - ChHltd set, but reason is unknown [ 1345.403283] dwc2 f72c0000.usb: hcint 0x00000002, intsts 0x04200021 [ 1345.410518] dwc2 f72c0000.usb: dwc2_hc_chhltd_intr_dma: Channel 15 - ChHltd set, but reason is unknown [ 1345.410533] dwc2 f72c0000.usb: hcint 0x00000002, intsts 0x04200021 [ 1345.460675] asix 1-1.2:1.0 eth0: asix_rx_fixup() Bad Header Length 0x36000807, offset 68