After data out stage gadget driver should not initate ZLP on control EP,
because it is up to function driver.
Signed-off-by: Minas Harutyunyan <hmi...@synopsys.com>
---
drivers/usb/dwc2/gadget.c | 20 ++++++--------------
1 file changed, 6 insertions(+), 14 deletions(-)
diff --git a/drivers/usb/dwc2/gadget.c b/drivers/usb/dwc2/gadget.c
index 98a4a79e7f6e..b7520fa3725b 100644
--- a/drivers/usb/dwc2/gadget.c
+++ b/drivers/usb/dwc2/gadget.c
@@ -1369,6 +1369,11 @@ static int dwc2_hsotg_ep_queue(struct usb_ep *ep, struct
usb_request *req,
return 0;
}
+ /* Change EP direction if status phase request is after data out */
+ if (!hs_ep->index && !req->length && !hs_ep->dir_in &&
+ (hs->ep0_state == DWC2_EP0_DATA_OUT))
+ hs_ep->dir_in = 1;
+
if (first) {
if (!hs_ep->isochronous) {
dwc2_hsotg_start_req(hs, hs_ep, hs_req, false);
@@ -2327,14 +2332,6 @@ static void dwc2_hsotg_handle_outdone(struct dwc2_hsotg
*hsotg, int epnum)
*/
}
- /* DDMA IN status phase will start from StsPhseRcvd interrupt */
- if (!using_desc_dma(hsotg) && epnum == 0 &&
- hsotg->ep0_state == DWC2_EP0_DATA_OUT) {
- /* Move to STATUS IN */
- dwc2_hsotg_ep0_zlp(hsotg, true);
- return;
- }
-
/*
* Slave mode OUT transfers do not go through XferComplete so
* adjust the ISOC parity here.
@@ -2997,14 +2994,9 @@ static void dwc2_hsotg_epint(struct dwc2_hsotg *hsotg,
unsigned int idx,
}
}
- if (ints & DXEPINT_STSPHSERCVD) {
+ if (ints & DXEPINT_STSPHSERCVD)
dev_dbg(hsotg->dev, "%s: StsPhseRcvd\n", __func__);
- /* Move to STATUS IN for DDMA */
- if (using_desc_dma(hsotg))
- dwc2_hsotg_ep0_zlp(hsotg, true);
- }
-
if (ints & DXEPINT_BACK2BACKSETUP)
dev_dbg(hsotg->dev, "%s: B2BSetup/INEPNakEff\n", __func__);
--
2.11.0
--
To unsubscribe from this list: send the line "unsubscribe linux-usb" in
the body of a message to majord...@vger.kernel.org
More majordomo info at http://vger.kernel.org/majordomo-info.html
