Hello everybody I have been stuck for ages trying to figure out something in the Standard USB Descriptor during the enumeration. It looks like it should should be quite simple but I am not getting it because maybe some mind block, maybe becuase the documentation is unclear, or maybe because I'm brain-dead. Here is the problem:
I think the host starts out requesting the device descriptor This is okay and works no problem. At some point the host requests the configuration descriptor and I get stuck. The usb 2.0 spec. says: "When the host requests the configuration descriptor, all related interface and endpoint descriptors are returned" How is the host supposed to know how much data is coming in or how much data to request until it reads wTotalLength? I would assume the host would request the 9 bytes of the configuration descriptor, then make subsequent requests to get the interfaces and endpoints but for instance in the section on the interface descriptor the spec says " An interface descriptor is always returned as part of a configuration descriptor. Again how is this supposed happen if the host is only requesting 9 bytes in the configuration descriptor stage Bruce -- To unsubscribe from this list: send the line "unsubscribe linux-usb" in the body of a message to majord...@vger.kernel.org More majordomo info at http://vger.kernel.org/majordomo-info.html
