This patch wires up extcon support to the dwc2 driver
so that devices that use a modern generic phy driver
and don't use the usb-phy infrastructure can still
signal connect/disconnect events.
Cc: Wei Xu <xuw...@hisilicon.com>
Cc: Guodong Xu <guodong...@linaro.org>
Cc: Amit Pundir <amit.pun...@linaro.org>
Cc: Rob Herring <robh...@kernel.org>
Cc: John Youn <johny...@synopsys.com>
Cc: Douglas Anderson <diand...@chromium.org>
Cc: Chen Yu <cheny...@huawei.com>
Cc: Kishon Vijay Abraham I <kis...@ti.com>
Cc: Felipe Balbi <felipe.ba...@linux.intel.com>
Cc: Greg Kroah-Hartman <gre...@linuxfoundation.org>
Cc: linux-usb@vger.kernel.org
Signed-off-by: John Stultz <john.stu...@linaro.org>
---
v2:
* Move extcon logic from generic phy to dwc2 driver, as
suggested by Kishon.
---
arch/arm64/boot/dts/hisilicon/hi6220.dtsi | 11 +++++++++
drivers/usb/dwc2/core.h | 16 ++++++++++++
drivers/usb/dwc2/core_intr.c | 25 +++++++++++++++++++
drivers/usb/dwc2/hcd.c | 23 +++++++++++++++++
drivers/usb/dwc2/platform.c | 41 +++++++++++++++++++++++++++++++
5 files changed, 116 insertions(+)
diff --git a/arch/arm64/boot/dts/hisilicon/hi6220.dtsi
b/arch/arm64/boot/dts/hisilicon/hi6220.dtsi
index 17839db..8a86a11 100644
--- a/arch/arm64/boot/dts/hisilicon/hi6220.dtsi
+++ b/arch/arm64/boot/dts/hisilicon/hi6220.dtsi
@@ -732,6 +732,16 @@
regulator-always-on;
};
+ usb_vbus: usb-vbus {
+ compatible = "linux,extcon-usb-gpio";
+ id-gpio = <&gpio2 6 1>;
+ };
+
+ usb_id: usb-id {
+ compatible = "linux,extcon-usb-gpio";
+ id-gpio = <&gpio2 5 1>;
+ };
+
usb_phy: usbphy {
compatible = "hisilicon,hi6220-usb-phy";
#phy-cells = <0>;
@@ -745,6 +755,7 @@
phys = <&usb_phy>;
phy-names = "usb2-phy";
clocks = <&sys_ctrl HI6220_USBOTG_HCLK>;
+ extcon = <&usb_vbus>, <&usb_id>;
clock-names = "otg";
dr_mode = "otg";
g-use-dma;
diff --git a/drivers/usb/dwc2/core.h b/drivers/usb/dwc2/core.h
index 2a21a04..4cfce62 100644
--- a/drivers/usb/dwc2/core.h
+++ b/drivers/usb/dwc2/core.h
@@ -623,6 +623,13 @@ struct dwc2_hregs_backup {
bool valid;
};
+struct dwc2_extcon {
+ struct notifier_block nb;
+ struct extcon_dev *extcon;
+ int state;
+};
+
+
/*
* Constants related to high speed periodic scheduling
*
@@ -996,6 +1003,10 @@ struct dwc2_hsotg {
u32 g_np_g_tx_fifo_sz;
u32 g_tx_fifo_sz[MAX_EPS_CHANNELS];
#endif /* CONFIG_USB_DWC2_PERIPHERAL || CONFIG_USB_DWC2_DUAL_ROLE */
+
+ struct dwc2_extcon extcon_vbus;
+ struct dwc2_extcon extcon_id;
+ struct delayed_work extcon_work;
};
/* Reasons for halting a host channel */
@@ -1041,6 +1052,11 @@ extern void dwc2_flush_rx_fifo(struct dwc2_hsotg *hsotg);
extern void dwc2_enable_global_interrupts(struct dwc2_hsotg *hcd);
extern void dwc2_disable_global_interrupts(struct dwc2_hsotg *hcd);
+extern int dwc2_extcon_vbus_notifier(struct notifier_block *nb,
+ unsigned long event, void *ptr);
+extern int dwc2_extcon_id_notifier(struct notifier_block *nb,
+ unsigned long event, void *ptr);
+
/* This function should be called on every hardware interrupt. */
extern irqreturn_t dwc2_handle_common_intr(int irq, void *dev);
diff --git a/drivers/usb/dwc2/core_intr.c b/drivers/usb/dwc2/core_intr.c
index d85c5c9..d4fa938 100644
--- a/drivers/usb/dwc2/core_intr.c
+++ b/drivers/usb/dwc2/core_intr.c
@@ -479,6 +479,31 @@ static void dwc2_handle_usb_suspend_intr(struct dwc2_hsotg
*hsotg)
}
}
+
+
+int dwc2_extcon_vbus_notifier(struct notifier_block *nb,
+ unsigned long event, void *ptr)
+{
+ struct dwc2_extcon *vbus = container_of(nb, struct dwc2_extcon, nb);
+ struct dwc2_hsotg *hsotg = container_of(vbus, struct dwc2_hsotg,
+ extcon_vbus);
+
+ schedule_delayed_work(&hsotg->extcon_work, msecs_to_jiffies(100));
+ return NOTIFY_DONE;
+}
+
+int dwc2_extcon_id_notifier(struct notifier_block *nb,
+ unsigned long event, void *ptr)
+{
+ struct dwc2_extcon *id = container_of(nb, struct dwc2_extcon, nb);
+ struct dwc2_hsotg *hsotg = container_of(id, struct dwc2_hsotg,
+ extcon_id);
+ schedule_delayed_work(&hsotg->extcon_work, msecs_to_jiffies(100));
+
+ return NOTIFY_DONE;
+}
+
+
#define GINTMSK_COMMON (GINTSTS_WKUPINT | GINTSTS_SESSREQINT | \
GINTSTS_CONIDSTSCHNG | GINTSTS_OTGINT | \
GINTSTS_MODEMIS | GINTSTS_DISCONNINT | \
diff --git a/drivers/usb/dwc2/hcd.c b/drivers/usb/dwc2/hcd.c
index df5a065..61eea70 100644
--- a/drivers/usb/dwc2/hcd.c
+++ b/drivers/usb/dwc2/hcd.c
@@ -47,6 +47,7 @@
#include <linux/io.h>
#include <linux/slab.h>
#include <linux/usb.h>
+#include <linux/extcon.h>
#include <linux/usb/hcd.h>
#include <linux/usb/ch11.h>
@@ -3246,6 +3247,26 @@ static void dwc2_conn_id_status_change(struct
work_struct *work)
}
}
+static void dwc2_hcd_extcon_func(struct work_struct *work)
+{
+ struct dwc2_hsotg *hsotg = container_of(work, struct dwc2_hsotg,
+ extcon_work.work);
+
+ if (!IS_ERR(hsotg->extcon_vbus.extcon))
+ hsotg->extcon_vbus.state =
+ extcon_get_cable_state_(hsotg->extcon_vbus.extcon,
+ EXTCON_USB);
+ if (!IS_ERR(hsotg->extcon_id.extcon))
+ hsotg->extcon_id.state =
+ extcon_get_cable_state_(hsotg->extcon_id.extcon,
+ EXTCON_USB_HOST);
+
+ if (hsotg->extcon_id.state)
+ usb_gadget_vbus_connect(&hsotg->gadget);
+ else
+ usb_gadget_vbus_disconnect(&hsotg->gadget);
+}
+
static void dwc2_wakeup_detected(unsigned long data)
{
struct dwc2_hsotg *hsotg = (struct dwc2_hsotg *)data;
@@ -5085,6 +5106,8 @@ int dwc2_hcd_init(struct dwc2_hsotg *hsotg, int irq)
/* Initialize port reset work */
INIT_DELAYED_WORK(&hsotg->reset_work, dwc2_hcd_reset_func);
+ INIT_DELAYED_WORK(&hsotg->extcon_work, dwc2_hcd_extcon_func);
+
/*
* Allocate space for storing data on status transactions. Normally no
* data is sent, but this space acts as a bit bucket. This must be
diff --git a/drivers/usb/dwc2/platform.c b/drivers/usb/dwc2/platform.c
index 8e1728b..2e4545f 100644
--- a/drivers/usb/dwc2/platform.c
+++ b/drivers/usb/dwc2/platform.c
@@ -46,6 +46,7 @@
#include <linux/phy/phy.h>
#include <linux/platform_data/s3c-hsotg.h>
#include <linux/reset.h>
+#include <linux/extcon.h>
#include <linux/usb/of.h>
@@ -543,6 +544,7 @@ static int dwc2_driver_probe(struct platform_device *dev)
struct dwc2_core_params defparams;
struct dwc2_hsotg *hsotg;
struct resource *res;
+ struct extcon_dev *ext_id, *ext_vbus;
int retval;
match = of_match_device(dwc2_of_match_table, &dev->dev);
@@ -620,6 +622,45 @@ static int dwc2_driver_probe(struct platform_device *dev)
if (retval)
goto error;
+ ext_id = ERR_PTR(-ENODEV);
+ ext_vbus = ERR_PTR(-ENODEV);
+ if (of_property_read_bool(dev->dev.of_node, "extcon")) {
+ /* Each one of them is not mandatory */
+ ext_vbus = extcon_get_edev_by_phandle(&dev->dev, 0);
+ if (IS_ERR(ext_vbus) && PTR_ERR(ext_vbus) != -ENODEV)
+ return PTR_ERR(ext_vbus);
+
+ ext_id = extcon_get_edev_by_phandle(&dev->dev, 1);
+ if (IS_ERR(ext_id) && PTR_ERR(ext_id) != -ENODEV)
+ return PTR_ERR(ext_id);
+ }
+
+ hsotg->extcon_vbus.extcon = ext_vbus;
+ if (!IS_ERR(ext_vbus)) {
+ hsotg->extcon_vbus.nb.notifier_call = dwc2_extcon_vbus_notifier;
+ retval = extcon_register_notifier(ext_vbus, EXTCON_USB,
+ &hsotg->extcon_vbus.nb);
+ if (retval < 0) {
+ dev_err(&dev->dev, "register VBUS notifier failed\n");
+ return retval;
+ }
+ hsotg->extcon_vbus.state = extcon_get_cable_state_(ext_vbus,
+ EXTCON_USB);
+ }
+
+ hsotg->extcon_id.extcon = ext_id;
+ if (!IS_ERR(ext_id)) {
+ hsotg->extcon_id.nb.notifier_call = dwc2_extcon_id_notifier;
+ retval = extcon_register_notifier(ext_id, EXTCON_USB_HOST,
+ &hsotg->extcon_id.nb);
+ if (retval < 0) {
+ dev_err(&dev->dev, "register ID notifier failed\n");
+ return retval;
+ }
+ hsotg->extcon_id.state = extcon_get_cable_state_(ext_id,
+ EXTCON_USB_HOST);
+ }
+
/*
* Reset before dwc2_get_hwparams() then it could get power-on real
* reset value form registers.
--
2.7.4
--
To unsubscribe from this list: send the line "unsubscribe linux-usb" in
the body of a message to majord...@vger.kernel.org
More majordomo info at http://vger.kernel.org/majordomo-info.html
