I had seen some odd behavior with HiKey's usb-gadget interface
that I finally seemed to have chased down. Basically every other
time I pluged in the OTG port, the gadget interface would
properly initialize. The other times, I'd get a big WARN_ON
in dwc2_hsotg_init_fifo() about the fifo_map not being clear.
Ends up if we don't disconnect the gadget state, the fifo-map
doesn't get cleared properly, which causes WARN_ON messages and
also results in the device not properly being setup as a gadget
every other time the OTG port is connected.
So this patch adds a call to dwc2_hsotg_disconnect() in the
reset path so the state is properly cleared.
With it, the gadget interface initializes properly on every
plug in.
Cc: Wei Xu <xuw...@hisilicon.com>
Cc: Guodong Xu <guodong...@linaro.org>
Cc: Amit Pundir <amit.pun...@linaro.org>
Cc: Rob Herring <robh...@kernel.org>
Cc: John Youn <johny...@synopsys.com>
Cc: Douglas Anderson <diand...@chromium.org>
Cc: Chen Yu <cheny...@huawei.com>
Cc: Felipe Balbi <felipe.ba...@linux.intel.com>
Cc: Greg Kroah-Hartman <gre...@linuxfoundation.org>
Cc: linux-usb@vger.kernel.org
Signed-off-by: John Stultz <john.stu...@linaro.org>
---
drivers/usb/dwc2/hcd.c | 1 +
1 file changed, 1 insertion(+)
diff --git a/drivers/usb/dwc2/hcd.c b/drivers/usb/dwc2/hcd.c
index 8c980fd..d2557b7 100644
--- a/drivers/usb/dwc2/hcd.c
+++ b/drivers/usb/dwc2/hcd.c
@@ -3228,6 +3228,7 @@ static void dwc2_conn_id_status_change(struct work_struct
*work)
dwc2_core_init(hsotg, false);
dwc2_enable_global_interrupts(hsotg);
spin_lock_irqsave(&hsotg->lock, flags);
+ dwc2_hsotg_disconnect(hsotg);
dwc2_hsotg_core_init_disconnected(hsotg, false);
spin_unlock_irqrestore(&hsotg->lock, flags);
dwc2_hsotg_core_connect(hsotg);
--
2.7.4
--
To unsubscribe from this list: send the line "unsubscribe linux-usb" in
the body of a message to majord...@vger.kernel.org
More majordomo info at http://vger.kernel.org/majordomo-info.html
