On Fri, Nov 04, 2016 at 10:46:24AM +0100, Ladislav Michl wrote:
> On Fri, Nov 04, 2016 at 10:31:38AM +0200, Felipe Balbi wrote:
> [snip]
> > Sounds like VBUS dropping to me. Remember, MUSB is really anal about
> > VBUS levels. If it drops enough for the PHY to report one of those 4
> > VBUS levels, then MUSB just gives up.
> >
> > What we used to do back at Nokia was disable reporting of some of those
> > VBUS levels at the PHY driver.
>
> Well, I was getting these even without anything connected to musb:
> [ 1526.594696] musb-hdrc musb-hdrc.0.auto: VBUS_ERROR in a_idle (90,
> <VBusValid), retry #0, port1 00000104
> [ 485.244781] musb-hdrc musb-hdrc.0.auto: VBUS_ERROR in a_idle (90,
> <VBusValid), retry #0, port1 00000104
> ...and with the hub connected:
> [ 562.803833] musb-hdrc musb-hdrc.0.auto: VBUS_ERROR in a_idle (90,
> <VBusValid), retry #0, port1 00000507
> [ 50.068664] musb-hdrc musb-hdrc.0.auto: VBUS_ERROR in a_idle (90,
> <VBusValid), retry #0, port1 00000507
> And indeed, after these errors musb gives up.
>
> However these are gone with Tony's last patch. Bisecting now, approx 6
> iterations left.
So here we are:
87326e858448c40e32f142c0b8dcc59d7b27c641 is the first bad commit
commit 87326e858448c40e32f142c0b8dcc59d7b27c641
Author: Tony Lindgren <t...@atomide.com>
Date: Tue May 31 10:05:20 2016 -0500
usb: musb: Remove extra PM runtime calls from 2430 glue layer
With PM runtime behaving, these are all now unnecessary.
Doing pm_runtime_get(musb->controller) will keep the parent
glue layer also active.
Signed-off-by: Tony Lindgren <t...@atomide.com>
Signed-off-by: Bin Liu <b-...@ti.com>
Signed-off-by: Greg Kroah-Hartman <gre...@linuxfoundation.org>
:040000 040000 6b7553722d760982d40a3e211bca7595ff313c62
d007f683d33e61a9f0046661097849c976169670 M drivers
--
To unsubscribe from this list: send the line "unsubscribe linux-usb" in
the body of a message to majord...@vger.kernel.org
More majordomo info at http://vger.kernel.org/majordomo-info.html
