Hi, On Thursday 03 November 2016 08:56 PM, Alexandre Bailon wrote: > The USB PHY is able to operate in OTG, host or peripheral. > Some board may be wired to work act only as host or peripheral. > In such case, the dr_mode property of controller must be set to > host or peripheral. But doing that will also configure the PHY > in host or peripheral mode whereas OTG is able to detect which > role the USB controller should take. > The PHY's host or peripheral mode are actually only useful when > hardware doesn't allow OTG to detect it's role. > > Add the usb20_force_mode property to force the PHY to operate > in host or peripheral mode.
I think we do just that if we populate dr_mode with host or peripheral. Why do we need another property to control dr_mode property? > When usb20_force_mode is used, dr_mode should also be configured > to host or peripheral. > The controller uses dr_mode to configure itself, but the phy use > it to get the mode to use to configure the PHY mode. > > Signed-off-by: Alexandre Bailon <abai...@baylibre.com> > --- > Documentation/devicetree/bindings/phy/phy-da8xx-usb.txt | 5 +++++ > 1 file changed, 5 insertions(+) > > diff --git a/Documentation/devicetree/bindings/phy/phy-da8xx-usb.txt > b/Documentation/devicetree/bindings/phy/phy-da8xx-usb.txt > index c26478b..9fc87fb 100644 > --- a/Documentation/devicetree/bindings/phy/phy-da8xx-usb.txt > +++ b/Documentation/devicetree/bindings/phy/phy-da8xx-usb.txt > @@ -4,6 +4,11 @@ Required properties: > - compatible: must be "ti,da830-usb-phy". > - #phy-cells: must be 1. > > +Optional properties: > +- usb20-force-mode: Force the phy to operate in same mode than the USB OTG > controller. > + It should only be defined if the hardware is not capable > correctly > + detect the role of USB by using VBUS and ID pin. >From what I understand from the previous patch, if VBUS sense and the session end comparator is enabled, the controller can work in host mode or device mode. Thanks Kishon -- To unsubscribe from this list: send the line "unsubscribe linux-usb" in the body of a message to majord...@vger.kernel.org More majordomo info at http://vger.kernel.org/majordomo-info.html
