On Thu, Aug 25, 2016 at 08:27:03AM +0200, Stefan Wahren wrote:
> Am 25.08.2016 um 08:44 schrieb Peter Chen:
> > On Thu, Aug 25, 2016 at 07:06:12AM +0200, Stefan Wahren wrote:
> >> Hi Alan,
> >>
> >> i tried the following patch:
> >> --- a/drivers/usb/chipidea/host.c
> >> +++ b/drivers/usb/chipidea/host.c
> >> @@ -185,6 +185,8 @@ static void host_stop(struct ci_hdrc *ci)
> >>
> >> if (hcd) {
> >> usb_remove_hcd(hcd);
> >> + ci_role_stop(ci);
> >> + synchronize_irq(ci->irq);
> > Would you please just add below line to see if this problem can be
> > fixed?
> > + ci->role = CI_ROLE_END;
> >
> > When ci->role is CI_ROLE_END, neither host nor device interrupt handler
> > will run.
>
> I would add this before synchronize_irq() as Alan suggested.
>
> >
> > What is your controller role? (dr_mode = host, peripheral or otg)?
>
> I'm using the unmodified arch/arm/boot/dts/imx23-olinuxino.dts so:
>
> dr_mode = host
It is so strange that there are interrupts after usb_remove_hcd is
called since the controller has already at reset status.
>
> > Besides, you would please add below line at core.c to show what
> > interrupt occurs at that time:
> >
> >
> > diff --git a/drivers/usb/chipidea/core.c b/drivers/usb/chipidea/core.c
> > index b5c155b..e6b8a7e 100644
> > --- a/drivers/usb/chipidea/core.c
> > +++ b/drivers/usb/chipidea/core.c
> > @@ -596,6 +596,12 @@ static irqreturn_t ci_irq(int irq, void *data)
> > /* Handle device/host interrupt */
> > if (ci->role != CI_ROLE_END)
> > ret = ci_role(ci)->irq(ci);
> > + else
> > + dev_info(ci->dev, "otgsc:0x%x, usbsts:0x%x\n",
> > + hw_read_otgsc(ci, ~0),
> > + hw_read_intr_status(ci) &
> > hw_read_intr_enable(ci)
> > + );
> > +
> >
> > return ret;
> > }
> >
If possible, add above code to see which is suspicious interrupts.
--
Best Regards,
Peter Chen
--
To unsubscribe from this list: send the line "unsubscribe linux-usb" in
the body of a message to [email protected]
More majordomo info at http://vger.kernel.org/majordomo-info.html
