* Andreas Kemnade <andr...@kemnade.info> [160821 22:29]: > Hi, > > On Thu, 18 Aug 2016 15:46:46 -0700 > Tony Lindgren <t...@atomide.com> wrote: > > > Hi all, > > > > Here's a series of patches to simplify musb PM runtime support > > further. > > > > I finally figured out that we can get rid of most of the glue layer > > specific workarounds by following the devctl session bit in musb core. > > > > The series also adds PM runtime support to the musb dsps glue layer > > for the PIO mode. > > > > I've tested basic plugging of cables in peripheral and host mode > > on omap3 and am335x using omap2plus_defconfig. Please test if you > > can. > > > Testing on GTA04 hardware (dm3730 + twl4030 as usb-phy), device mode, > charging: it does not make things worse than it is without it. Same > problems,
OK good to hear and thanks for testing. > phy->power_count goes down to -1, so no gadget, no charging. > Fixing that (I have some nearly-ready things in my queue) causes > device mode and charging to work (as it does without > this patch-series). OK. I'll try to test that phy patch you sent today. Regards, Tony -- To unsubscribe from this list: send the line "unsubscribe linux-usb" in the body of a message to majord...@vger.kernel.org More majordomo info at http://vger.kernel.org/majordomo-info.html
