On 2016/8/17 18:02, Heiko Stübner wrote:
Am Freitag, 22. Juli 2016, 15:00:46 schrieb Frank Wang:
Add vcc5v0_host regulator for usb2-phy and enable host-port support.

Signed-off-by: Frank Wang <frank.w...@rock-chips.com>
applied to ny dts64 branch [0] with some changes:

- the pin is named vcc5v0_host_en not host_vbus_drv in the schematics
   please always try to use the names from the schematics
- separated the enablement of the subnodes


Thanks for your valuable comments, I will try to improve the quality of my patches in future.

BR.
Frank

Heiko

[0] 
https://git.kernel.org/cgit/linux/kernel/git/mmind/linux-rockchip.git/commit/?id=1d3bc1d6c9c4658d554bcf89a71b35a6783a5b4e


---
  arch/arm64/boot/dts/rockchip/rk3399-evb.dts |   44
+++++++++++++++++++++++++++ 1 file changed, 44 insertions(+)

diff --git a/arch/arm64/boot/dts/rockchip/rk3399-evb.dts
b/arch/arm64/boot/dts/rockchip/rk3399-evb.dts index 1a3eb14..56aeedb 100644
--- a/arch/arm64/boot/dts/rockchip/rk3399-evb.dts
+++ b/arch/arm64/boot/dts/rockchip/rk3399-evb.dts
@@ -69,6 +69,25 @@
                regulator-max-microvolt = <3300000>;
        };

+       vcc5v0_sys: vcc5v0-sys {
+               compatible = "regulator-fixed";
+               regulator-name = "vcc5v0_sys";
+               regulator-always-on;
+               regulator-boot-on;
+               regulator-min-microvolt = <5000000>;
+               regulator-max-microvolt = <5000000>;
+       };
+
+       vcc5v0_host: vcc5v0-host-regulator {
+               compatible = "regulator-fixed";
+               enable-active-high;
+               gpio = <&gpio4 25 GPIO_ACTIVE_HIGH>;
+               pinctrl-names = "default";
+               pinctrl-0 = <&host_vbus_drv>;
+               regulator-name = "vcc5v0_host";
+               vin-supply = <&vcc5v0_sys>;
+       };
+
        vcc_phy: vcc-phy-regulator {
                compatible = "regulator-fixed";
                regulator-name = "vcc_phy";
@@ -89,6 +108,24 @@
        status = "okay";
  };

+&u2phy0 {
+       status = "okay";
+
+       u2phy0_host: host-port {
+               phy-supply = <&vcc5v0_host>;
+               status = "okay";
+       };
+};
+
+&u2phy1 {
+       status = "okay";
+
+       u2phy1_host: host-port {
+               phy-supply = <&vcc5v0_host>;
+               status = "okay";
+       };
+};
+
  &uart2 {
        status = "okay";
  };
@@ -121,4 +158,11 @@
                                <1 18 RK_FUNC_GPIO &pcfg_pull_down>;
                };
        };
+
+       usb2 {
+               host_vbus_drv: host-vbus-drv {
+                       rockchip,pins =
+                               <4 25 RK_FUNC_GPIO &pcfg_pull_none>;
+               };
+       };
  };

--
To unsubscribe from this list: send the line "unsubscribe linux-usb" in
the body of a message to majord...@vger.kernel.org
More majordomo info at  http://vger.kernel.org/majordomo-info.html

Reply via email to