early console in setup code
Probing EDD (edd=off to disable)... ok
early console in extract_kernel
input_data: 0x0000000003e5d255
input_len: 0x000000000072b92c
output: 0x0000000001000000
output_len: 0x0000000001e93830
kernel_total_size: 0x00000000035a8000

Decompressing Linux... Parsing ELF... done.
Booting the kernel.
[    0.000000] Linux version 4.8.0-rc1-00020-g0937a4d (kbuild@xian) (gcc version 6.1.1 20160705 (Debian 6.1.1-9) ) #1 SMP PREEMPT Fri Aug 12 08:23:08 CST 2016
[    0.000000] Command line: ip=::::vm-kbuild-yocto-x86_64-15::dhcp root=/dev/ram0 user=lkp job=/lkp/scheduled/vm-kbuild-yocto-x86_64-15/boot-1-yocto-minimal-x86_64.cgz-0937a4d787539e2f5613768662b5e6bbbdf2a2e1-20160812-13144-1ekqu5v-1.yaml ARCH=x86_64 kconfig=x86_64-randconfig-n0-08110915 branch=linux-devel/devel-hourly-2016081104 commit=0937a4d787539e2f5613768662b5e6bbbdf2a2e1 BOOT_IMAGE=/pkg/linux/x86_64-randconfig-n0-08110915/gcc-6/0937a4d787539e2f5613768662b5e6bbbdf2a2e1/vmlinuz-4.8.0-rc1-00020-g0937a4d max_uptime=600 RESULT_ROOT=/result/boot/1/vm-kbuild-yocto-x86_64/yocto-minimal-x86_64.cgz/x86_64-randconfig-n0-08110915/gcc-6/0937a4d787539e2f5613768662b5e6bbbdf2a2e1/0 LKP_SERVER=inn debug apic=debug sysrq_always_enabled rcupdate.rcu_cpu_stall_timeout=100 panic=-1 softlockup_panic=1 nmi_watchdog=panic oops=panic load_ramdisk=2 prompt_ramdisk=0 systemd.log_level=err ignore_loglevel earlyprintk=ttyS0,115200 console=ttyS0,115200 console=tty0 vga=normal rw drbd.minor_count=8
[    0.000000] KERNEL supported cpus:
[    0.000000]   Centaur CentaurHauls
[    0.000000] CPU: vendor_id 'GenuineIntel' unknown, using generic init.
[    0.000000] CPU: Your system may be unstable.
[    0.000000] x86/fpu: Supporting XSAVE feature 0x001: 'x87 floating point registers'
[    0.000000] x86/fpu: Supporting XSAVE feature 0x002: 'SSE registers'
[    0.000000] x86/fpu: Supporting XSAVE feature 0x004: 'AVX registers'
[    0.000000] x86/fpu: xstate_offset[2]:  576, xstate_sizes[2]:  256
[    0.000000] x86/fpu: Enabled xstate features 0x7, context size is 832 bytes, using 'standard' format.
[    0.000000] x86/fpu: Using 'eager' FPU context switches.
[    0.000000] e820: BIOS-provided physical RAM map:
[    0.000000] BIOS-e820: [mem 0x0000000000000000-0x000000000009fbff] usable
[    0.000000] BIOS-e820: [mem 0x000000000009fc00-0x000000000009ffff] reserved
[    0.000000] BIOS-e820: [mem 0x00000000000f0000-0x00000000000fffff] reserved
[    0.000000] BIOS-e820: [mem 0x0000000000100000-0x000000001ffdffff] usable
[    0.000000] BIOS-e820: [mem 0x000000001ffe0000-0x000000001fffffff] reserved
[    0.000000] BIOS-e820: [mem 0x00000000feffc000-0x00000000feffffff] reserved
[    0.000000] BIOS-e820: [mem 0x00000000fffc0000-0x00000000ffffffff] reserved
[    0.000000] debug: ignoring loglevel setting.
[    0.000000] bootconsole [earlyser0] enabled
[    0.000000] NX (Execute Disable) protection: active
[    0.000000] SMBIOS 2.8 present.
[    0.000000] DMI: QEMU Standard PC (i440FX + PIIX, 1996), BIOS Debian-1.8.2-1 04/01/2014
[    0.000000] Hypervisor detected: KVM
[    0.000000] e820: update [mem 0x00000000-0x00000fff] usable ==> reserved
[    0.000000] e820: remove [mem 0x000a0000-0x000fffff] usable
[    0.000000] e820: last_pfn = 0x1ffe0 max_arch_pfn = 0x400000000
[    0.000000] Scan for SMP in [mem 0x00000000-0x000003ff]
[    0.000000] Scan for SMP in [mem 0x0009fc00-0x0009ffff]
[    0.000000] Scan for SMP in [mem 0x000f0000-0x000fffff]
[    0.000000] found SMP MP-table at [mem 0x000f6630-0x000f663f] mapped at [ffff8800000f6630]
[    0.000000]   mpc: f6640-f6718
[    0.000000] Scanning 1 areas for low memory corruption
[    0.000000] Base memory trampoline at [ffff880000099000] 99000 size 24576
[    0.000000] BRK [0x04583000, 0x04583fff] PGTABLE
[    0.000000] BRK [0x04584000, 0x04584fff] PGTABLE
[    0.000000] BRK [0x04585000, 0x04585fff] PGTABLE
[    0.000000] BRK [0x04586000, 0x04586fff] PGTABLE
[    0.000000] RAMDISK: [mem 0x1fa94000-0x1ffdffff]
[    0.000000] ACPI: Early table checksum verification disabled
[    0.000000] ACPI: RSDP 0x00000000000F6460 000014 (v00 BOCHS )
[    0.000000] ACPI: RSDT 0x000000001FFE16EE 000034 (v01 BOCHS  BXPCRSDT 00000001 BXPC 00000001)
[    0.000000] ACPI: FACP 0x000000001FFE0C14 000074 (v01 BOCHS  BXPCFACP 00000001 BXPC 00000001)
[    0.000000] ACPI: DSDT 0x000000001FFE0040 000BD4 (v01 BOCHS  BXPCDSDT 00000001 BXPC 00000001)
[    0.000000] ACPI: FACS 0x000000001FFE0000 000040
[    0.000000] ACPI: SSDT 0x000000001FFE0C88 0009B6 (v01 BOCHS  BXPCSSDT 00000001 BXPC 00000001)
[    0.000000] ACPI: APIC 0x000000001FFE163E 000078 (v01 BOCHS  BXPCAPIC 00000001 BXPC 00000001)
[    0.000000] ACPI: HPET 0x000000001FFE16B6 000038 (v01 BOCHS  BXPCHPET 00000001 BXPC 00000001)
[    0.000000] ACPI: Local APIC address 0xfee00000
[    0.000000] mapped APIC to ffffffffff5fd000 (        fee00000)
[    0.000000] No NUMA configuration found
[    0.000000] Faking a node at [mem 0x0000000000000000-0x000000001ffdffff]
[    0.000000] NODE_DATA(0) allocated [mem 0x1fa90000-0x1fa93fff]
[    0.000000] kvm-clock: Using msrs 4b564d01 and 4b564d00
[    0.000000] kvm-clock: cpu 0, msr 0:1fa8f001, primary cpu clock
[    0.000000] kvm-clock: using sched offset of 3456406906 cycles
[    0.000000] clocksource: kvm-clock: mask: 0xffffffffffffffff max_cycles: 0x1cd42e4dffb, max_idle_ns: 881590591483 ns
[    0.000000] Zone ranges:
[    0.000000]   DMA      [mem 0x0000000000001000-0x0000000000ffffff]
[    0.000000]   DMA32    [mem 0x0000000001000000-0x000000001ffdffff]
[    0.000000]   Normal   empty
[    0.000000] Movable zone start for each node
[    0.000000] Early memory node ranges
[    0.000000]   node   0: [mem 0x0000000000001000-0x000000000009efff]
[    0.000000]   node   0: [mem 0x0000000000100000-0x000000001ffdffff]
[    0.000000] Initmem setup node 0 [mem 0x0000000000001000-0x000000001ffdffff]
[    0.000000] On node 0 totalpages: 130942
[    0.000000]   DMA zone: 56 pages used for memmap
[    0.000000]   DMA zone: 21 pages reserved
[    0.000000]   DMA zone: 3998 pages, LIFO batch:0
[    0.000000]   DMA32 zone: 1736 pages used for memmap
[    0.000000]   DMA32 zone: 126944 pages, LIFO batch:31
[    0.000000] ACPI: PM-Timer IO Port: 0x608
[    0.000000] ACPI: Local APIC address 0xfee00000
[    0.000000] mapped APIC to ffffffffff5fd000 (        fee00000)
[    0.000000] ACPI: LAPIC_NMI (acpi_id[0xff] dfl dfl lint[0x1])
[    0.000000] IOAPIC[0]: apic_id 0, version 17, address 0xfec00000, GSI 0-23
[    0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl)
[    0.000000] Int: type 0, pol 0, trig 0, bus 00, IRQ 00, APIC ID 0, APIC INT 02
[    0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 5 global_irq 5 high level)
[    0.000000] Int: type 0, pol 1, trig 3, bus 00, IRQ 05, APIC ID 0, APIC INT 05
[    0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 high level)
[    0.000000] Int: type 0, pol 1, trig 3, bus 00, IRQ 09, APIC ID 0, APIC INT 09
[    0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 10 global_irq 10 high level)
[    0.000000] Int: type 0, pol 1, trig 3, bus 00, IRQ 0a, APIC ID 0, APIC INT 0a
[    0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 11 global_irq 11 high level)
[    0.000000] Int: type 0, pol 1, trig 3, bus 00, IRQ 0b, APIC ID 0, APIC INT 0b
[    0.000000] ACPI: IRQ0 used by override.
[    0.000000] Int: type 0, pol 0, trig 0, bus 00, IRQ 01, APIC ID 0, APIC INT 01
[    0.000000] Int: type 0, pol 0, trig 0, bus 00, IRQ 03, APIC ID 0, APIC INT 03
[    0.000000] Int: type 0, pol 0, trig 0, bus 00, IRQ 04, APIC ID 0, APIC INT 04
[    0.000000] ACPI: IRQ5 used by override.
[    0.000000] Int: type 0, pol 0, trig 0, bus 00, IRQ 06, APIC ID 0, APIC INT 06
[    0.000000] Int: type 0, pol 0, trig 0, bus 00, IRQ 07, APIC ID 0, APIC INT 07
[    0.000000] Int: type 0, pol 0, trig 0, bus 00, IRQ 08, APIC ID 0, APIC INT 08
[    0.000000] ACPI: IRQ9 used by override.
[    0.000000] ACPI: IRQ10 used by override.
[    0.000000] ACPI: IRQ11 used by override.
[    0.000000] Int: type 0, pol 0, trig 0, bus 00, IRQ 0c, APIC ID 0, APIC INT 0c
[    0.000000] Int: type 0, pol 0, trig 0, bus 00, IRQ 0d, APIC ID 0, APIC INT 0d
[    0.000000] Int: type 0, pol 0, trig 0, bus 00, IRQ 0e, APIC ID 0, APIC INT 0e
[    0.000000] Int: type 0, pol 0, trig 0, bus 00, IRQ 0f, APIC ID 0, APIC INT 0f
[    0.000000] Using ACPI (MADT) for SMP configuration information
[    0.000000] ACPI: HPET id: 0x8086a201 base: 0xfed00000
[    0.000000] smpboot: Allowing 1 CPUs, 0 hotplug CPUs
[    0.000000] mapped IOAPIC to ffffffffff5fc000 (fec00000)
[    0.000000] e820: [mem 0x20000000-0xfeffbfff] available for PCI devices
[    0.000000] Booting paravirtualized kernel on KVM
[    0.000000] clocksource: refined-jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 1910969940391419 ns
[    0.000000] setup_percpu: NR_CPUS:64 nr_cpumask_bits:64 nr_cpu_ids:1 nr_node_ids:1
[    0.000000] percpu: Embedded 32 pages/cpu @ffff88001f400000 s99584 r0 d31488 u2097152
[    0.000000] pcpu-alloc: s99584 r0 d31488 u2097152 alloc=1*2097152
[    0.000000] pcpu-alloc: [0] 0 
[    0.000000] KVM setup async PF for cpu 0
[    0.000000] kvm-stealtime: cpu 0, msr 1f40c7c0
[    0.000000] Built 1 zonelists in Node order, mobility grouping on.  Total pages: 129129
[    0.000000] Policy zone: DMA32
[    0.000000] Kernel command line: ip=::::vm-kbuild-yocto-x86_64-15::dhcp root=/dev/ram0 user=lkp job=/lkp/scheduled/vm-kbuild-yocto-x86_64-15/boot-1-yocto-minimal-x86_64.cgz-0937a4d787539e2f5613768662b5e6bbbdf2a2e1-20160812-13144-1ekqu5v-1.yaml ARCH=x86_64 kconfig=x86_64-randconfig-n0-08110915 branch=linux-devel/devel-hourly-2016081104 commit=0937a4d787539e2f5613768662b5e6bbbdf2a2e1 BOOT_IMAGE=/pkg/linux/x86_64-randconfig-n0-08110915/gcc-6/0937a4d787539e2f5613768662b5e6bbbdf2a2e1/vmlinuz-4.8.0-rc1-00020-g0937a4d max_uptime=600 RESULT_ROOT=/result/boot/1/vm-kbuild-yocto-x86_64/yocto-minimal-x86_64.cgz/x86_64-randconfig-n0-08110915/gcc-6/0937a4d787539e2f5613768662b5e6bbbdf2a2e1/0 LKP_SERVER=inn debug apic=debug sysrq_always_enabled rcupdate.rcu_cpu_stall_timeout=100 panic=-1 softlockup_panic=1 nmi_watchdog=panic oops=panic load_ramdisk=2 prompt_ramdisk=0 systemd.log_level=err ignore_loglevel earlyprintk=ttyS0,115200 console=ttyS0,115200 console=tty0 vga=normal rw drbd.minor_count=8
[    0.000000] PID hash table entries: 2048 (order: 2, 16384 bytes)
[    0.000000] Memory: 455512K/523768K available (16546K kernel code, 1459K rwdata, 4876K rodata, 1128K init, 27580K bss, 68256K reserved, 0K cma-reserved)
[    0.000000] Preemptible hierarchical RCU implementation.
[    0.000000] RCU: Adjusting geometry for rcu_fanout_leaf=16, nr_cpu_ids=1
[    0.000000] NR_IRQS:4352 nr_irqs:256 16
[    0.000000] console [ttyS0] enabled
[    0.000000] console [ttyS0] enabled
[    0.000000] bootconsole [earlyser0] disabled
[    0.000000] bootconsole [earlyser0] disabled
[    0.000000] Lock dependency validator: Copyright (c) 2006 Red Hat, Inc., Ingo Molnar
[    0.000000] ... MAX_LOCKDEP_SUBCLASSES:  8
[    0.000000] ... MAX_LOCK_DEPTH:          48
[    0.000000] ... MAX_LOCKDEP_KEYS:        8191
[    0.000000] ... CLASSHASH_SIZE:          4096
[    0.000000] ... MAX_LOCKDEP_ENTRIES:     32768
[    0.000000] ... MAX_LOCKDEP_CHAINS:      65536
[    0.000000] ... CHAINHASH_SIZE:          32768
[    0.000000]  memory used by lock dependency info: 8127 kB
[    0.000000]  per task-struct memory footprint: 1920 bytes
[    0.000000] ODEBUG: selftest passed
[    0.000000] clocksource: hpet: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 19112604467 ns
[    0.000000] hpet clockevent registered
[    0.000000] tsc: Fast TSC calibration using PIT
[    0.000000] tsc: Detected 2693.763 MHz processor
[    0.143682] Calibrating delay loop (skipped) preset value.. 5387.01 BogoMIPS (lpj=2693508)
[    0.145110] pid_max: default: 32768 minimum: 301
[    0.145888] ACPI: Core revision 20160422
[    0.151178] ACPI: 2 ACPI AML tables successfully acquired and loaded
[    0.151941] 
[    0.152146] Security Framework initialized
[    0.152672] Dentry cache hash table entries: 65536 (order: 7, 524288 bytes)
[    0.154053] Inode-cache hash table entries: 32768 (order: 6, 262144 bytes)
[    0.155003] Mount-cache hash table entries: 1024 (order: 1, 8192 bytes)
[    0.155693] Mountpoint-cache hash table entries: 1024 (order: 1, 8192 bytes)
[    0.156923] mce: CPU supports 10 MCE banks
[    0.157573] mce: unknown CPU type - not enabling MCE support
[    0.158498] Last level iTLB entries: 4KB 0, 2MB 0, 4MB 0
[    0.159336] Last level dTLB entries: 4KB 0, 2MB 0, 4MB 0, 1GB 0
[    0.185768] Freeing SMP alternatives memory: 44K (ffffffff82a88000 - ffffffff82a93000)
[    0.190541] smpboot: Max logical packages: 1
[    0.191429] smpboot: APIC(0) Converting physical 0 to logical package 0
[    0.192768] enabled ExtINT on CPU#0
[    0.194592] ENABLING IO-APIC IRQs
[    0.195345] init IO_APIC IRQs
[    0.195818]  apic 0 pin 0 not connected
[    0.196764] IOAPIC[0]: Set routing entry (0-1 -> 0x31 -> IRQ 1 Mode:0 Active:0 Dest:1)
[    0.198063] IOAPIC[0]: Set routing entry (0-2 -> 0x30 -> IRQ 0 Mode:0 Active:0 Dest:1)
[    0.199769] IOAPIC[0]: Set routing entry (0-3 -> 0x33 -> IRQ 3 Mode:0 Active:0 Dest:1)
[    0.201014] IOAPIC[0]: Set routing entry (0-4 -> 0x34 -> IRQ 4 Mode:0 Active:0 Dest:1)
[    0.202277] IOAPIC[0]: Set routing entry (0-5 -> 0x35 -> IRQ 5 Mode:1 Active:0 Dest:1)
[    0.203678] IOAPIC[0]: Set routing entry (0-6 -> 0x36 -> IRQ 6 Mode:0 Active:0 Dest:1)
[    0.205231] IOAPIC[0]: Set routing entry (0-7 -> 0x37 -> IRQ 7 Mode:0 Active:0 Dest:1)
[    0.206518] IOAPIC[0]: Set routing entry (0-8 -> 0x38 -> IRQ 8 Mode:0 Active:0 Dest:1)
[    0.207956] IOAPIC[0]: Set routing entry (0-9 -> 0x39 -> IRQ 9 Mode:1 Active:0 Dest:1)
[    0.209547] IOAPIC[0]: Set routing entry (0-10 -> 0x3a -> IRQ 10 Mode:1 Active:0 Dest:1)
[    0.210832] IOAPIC[0]: Set routing entry (0-11 -> 0x3b -> IRQ 11 Mode:1 Active:0 Dest:1)
[    0.212520] IOAPIC[0]: Set routing entry (0-12 -> 0x3c -> IRQ 12 Mode:0 Active:0 Dest:1)
[    0.213791] IOAPIC[0]: Set routing entry (0-13 -> 0x3d -> IRQ 13 Mode:0 Active:0 Dest:1)
[    0.215062] IOAPIC[0]: Set routing entry (0-14 -> 0x3e -> IRQ 14 Mode:0 Active:0 Dest:1)
[    0.216553] IOAPIC[0]: Set routing entry (0-15 -> 0x3f -> IRQ 15 Mode:0 Active:0 Dest:1)
[    0.217982]  apic 0 pin 16 not connected
[    0.218763]  apic 0 pin 17 not connected
[    0.219584]  apic 0 pin 18 not connected
[    0.220179]  apic 0 pin 19 not connected
[    0.220867]  apic 0 pin 20 not connected
[    0.221551]  apic 0 pin 21 not connected
[    0.222315]  apic 0 pin 22 not connected
[    0.222921]  apic 0 pin 23 not connected
[    0.223812] ..TIMER: vector=0x30 apic1=0 pin1=2 apic2=-1 pin2=-1
[    0.225102] TSC deadline timer enabled
[    0.225712] smpboot: CPU0: GenuineIntel Intel Xeon E312xx (Sandy Bridge) (family: 0x6, model: 0x2a, stepping: 0x1)
[    0.227551] Performance Events: no PMU driver, software events only.
[    0.237223] x86: Booted up 1 node, 1 CPUs
[    0.237901] smpboot: Total of 1 processors activated (5387.01 BogoMIPS)
[    0.239653] devtmpfs: initialized
[    0.240453] x86/mm: Memory block size: 128MB
[    0.265655] clocksource: jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 1911260446275000 ns
[    0.267504] xor: automatically using best checksumming function:
[    0.278428]    avx       : 12168.000 MB/sec
[    0.279033] prandom: seed boundary self test passed
[    0.281343] prandom: 100 self tests passed
[    0.282182] regulator-dummy: no parameters
[    0.283199] NET: Registered protocol family 16
[    0.286004] cpuidle: using governor menu
[    0.287695] ACPI: bus type PCI registered
[    0.288465] PCI: Using configuration type 1 for base access
[    0.335904] raid6: sse2x1   gen()  2406 MB/s
[    0.353064] raid6: sse2x1   xor()  1171 MB/s
[    0.370348] raid6: sse2x2   gen()  3812 MB/s
[    0.387659] raid6: sse2x2   xor()  2142 MB/s
[    0.404827] raid6: sse2x4   gen()  5476 MB/s
[    0.421954] raid6: sse2x4   xor()  3052 MB/s
[    0.422653] raid6: using algorithm sse2x4 gen() 5476 MB/s
[    0.423417] raid6: .... xor() 3052 MB/s, rmw enabled
[    0.424120] raid6: using ssse3x2 recovery algorithm
[    0.425183] ACPI: Added _OSI(Module Device)
[    0.425782] ACPI: Added _OSI(Processor Device)
[    0.426478] ACPI: Added _OSI(3.0 _SCP Extensions)
[    0.427139] ACPI: Added _OSI(Processor Aggregator Device)
[    0.431938] ACPI: Interpreter enabled
[    0.432542] ACPI: (supports S0 S3 S5)
[    0.433066] ACPI: Using IOAPIC for interrupt routing
[    0.433850] PCI: Using host bridge windows from ACPI; if necessary, use "pci=nocrs" and report a bug
[    0.448602] ACPI: PCI Root Bridge [PCI0] (domain 0000 [bus 00-ff])
[    0.449497] acpi PNP0A03:00: _OSC: OS supports [Segments]
[    0.450266] acpi PNP0A03:00: _OSC failed (AE_NOT_FOUND); disabling ASPM
[    0.451492] PCI host bridge to bus 0000:00
[    0.452077] pci_bus 0000:00: root bus resource [io  0x0000-0x0cf7 window]
[    0.453091] pci_bus 0000:00: root bus resource [io  0x0d00-0xffff window]
[    0.454037] pci_bus 0000:00: root bus resource [mem 0x000a0000-0x000bffff window]
[    0.455092] pci_bus 0000:00: root bus resource [mem 0x20000000-0xfebfffff window]
[    0.456137] pci_bus 0000:00: root bus resource [bus 00-ff]
[    0.456947] pci 0000:00:00.0: [8086:1237] type 00 class 0x060000
[    0.458675] pci 0000:00:01.0: [8086:7000] type 00 class 0x060100
[    0.460419] pci 0000:00:01.1: [8086:7010] type 00 class 0x010180
[    0.465817] pci 0000:00:01.1: reg 0x20: [io  0xc080-0xc08f]
[    0.468598] pci 0000:00:01.1: legacy IDE quirk: reg 0x10: [io  0x01f0-0x01f7]
[    0.469584] pci 0000:00:01.1: legacy IDE quirk: reg 0x14: [io  0x03f6]
[    0.470474] pci 0000:00:01.1: legacy IDE quirk: reg 0x18: [io  0x0170-0x0177]
[    0.471448] pci 0000:00:01.1: legacy IDE quirk: reg 0x1c: [io  0x0376]
[    0.473354] pci 0000:00:01.3: [8086:7113] type 00 class 0x068000
[    0.474685] pci 0000:00:01.3: quirk: [io  0x0600-0x063f] claimed by PIIX4 ACPI
[    0.475686] pci 0000:00:01.3: quirk: [io  0x0700-0x070f] claimed by PIIX4 SMB
[    0.477183] pci 0000:00:02.0: [1234:1111] type 00 class 0x030000
[    0.480603] pci 0000:00:02.0: reg 0x10: [mem 0xfd000000-0xfdffffff pref]
[    0.485721] pci 0000:00:02.0: reg 0x18: [mem 0xfebf0000-0xfebf0fff]
[    0.496369] pci 0000:00:02.0: reg 0x30: [mem 0xfebe0000-0xfebeffff pref]
[    0.497921] pci 0000:00:03.0: [8086:100e] type 00 class 0x020000
[    0.500282] pci 0000:00:03.0: reg 0x10: [mem 0xfebc0000-0xfebdffff]
[    0.502669] pci 0000:00:03.0: reg 0x14: [io  0xc000-0xc03f]
[    0.510765] pci 0000:00:03.0: reg 0x30: [mem 0xfeb80000-0xfebbffff pref]
[    0.512315] pci 0000:00:04.0: [1af4:1001] type 00 class 0x010000
[    0.515048] pci 0000:00:04.0: reg 0x10: [io  0xc040-0xc07f]
[    0.518226] pci 0000:00:04.0: reg 0x14: [mem 0xfebf1000-0xfebf1fff]
[    0.527145] pci 0000:00:05.0: [8086:25ab] type 00 class 0x088000
[    0.529507] pci 0000:00:05.0: reg 0x10: [mem 0xfebf2000-0xfebf200f]
[    0.536937] ACPI: PCI Interrupt Link [LNKA] (IRQs 5 *10 11)
[    0.538155] ACPI: PCI Interrupt Link [LNKB] (IRQs 5 *10 11)
[    0.540140] ACPI: PCI Interrupt Link [LNKC] (IRQs 5 10 *11)
[    0.541343] ACPI: PCI Interrupt Link [LNKD] (IRQs 5 10 *11)
[    0.542388] ACPI: PCI Interrupt Link [LNKS] (IRQs *9)
[    0.543895] ACPI: Enabled 16 GPEs in block 00 to 0F
[    0.545506] vgaarb: setting as boot device: PCI:0000:00:02.0
[    0.546302] vgaarb: device added: PCI:0000:00:02.0,decodes=io+mem,owns=io+mem,locks=none
[    0.547462] vgaarb: loaded
[    0.547849] vgaarb: bridge control possible 0000:00:02.0
[    0.549198] SCSI subsystem initialized
[    0.550836] libata version 3.00 loaded.
[    0.551505] ACPI: bus type USB registered
[    0.552152] usbcore: registered new interface driver usbfs
[    0.552960] usbcore: registered new interface driver hub
[    0.553785] usbcore: registered new device driver usb
[    0.554646] Linux video capture interface: v2.00
[    0.555336] pps_core: LinuxPPS API ver. 1 registered
[    0.556043] pps_core: Software ver. 5.3.6 - Copyright 2005-2007 Rodolfo Giometti <giometti@linux.it>
[    0.557349] PTP clock support registered
[    0.557966] EDAC MC: Ver: 3.0.0
[    0.560639] FPGA manager framework
[    0.561146] PCI: Using ACPI for IRQ routing
[    0.561758] PCI: pci_cache_line_size set to 64 bytes
[    0.562625] e820: reserve RAM buffer [mem 0x0009fc00-0x0009ffff]
[    0.563504] e820: reserve RAM buffer [mem 0x1ffe0000-0x1fffffff]
[    0.564757] Bluetooth: Core ver 2.21
[    0.565290] NET: Registered protocol family 31
[    0.565933] Bluetooth: HCI device and connection manager initialized
[    0.566851] Bluetooth: HCI socket layer initialized
[    0.567558] Bluetooth: L2CAP socket layer initialized
[    0.568295] Bluetooth: SCO socket layer initialized
[    0.569007] NET: Registered protocol family 8
[    0.569625] NET: Registered protocol family 20
[    0.570452] nfc: nfc_init: NFC Core ver 0.1
[    0.571087] NET: Registered protocol family 39
[    0.572928] clocksource: Switched to clocksource kvm-clock
[    0.573843] VFS: Disk quotas dquot_6.6.0
[    0.574460] VFS: Dquot-cache hash table entries: 512 (order 0, 4096 bytes)
[    0.575539] pnp: PnP ACPI init
[    0.576184] pnp 00:00: Plug and Play ACPI device, IDs PNP0b00 (active)
[    0.577278] pnp 00:01: Plug and Play ACPI device, IDs PNP0303 (active)
[    0.578345] pnp 00:02: Plug and Play ACPI device, IDs PNP0f13 (active)
[    0.579376] pnp 00:03: [dma 2]
[    0.579902] pnp 00:03: Plug and Play ACPI device, IDs PNP0700 (active)
[    0.581056] pnp 00:04: Plug and Play ACPI device, IDs PNP0400 (active)
[    0.582172] pnp 00:05: Plug and Play ACPI device, IDs PNP0501 (active)
[    0.583967] pnp: PnP ACPI: found 6 devices
[    0.590059] clocksource: acpi_pm: mask: 0xffffff max_cycles: 0xffffff, max_idle_ns: 2085701024 ns
[    0.592068] pci_bus 0000:00: resource 4 [io  0x0000-0x0cf7 window]
[    0.593639] pci_bus 0000:00: resource 5 [io  0x0d00-0xffff window]
[    0.594575] pci_bus 0000:00: resource 6 [mem 0x000a0000-0x000bffff window]
[    0.595941] pci_bus 0000:00: resource 7 [mem 0x20000000-0xfebfffff window]
[    0.597273] NET: Registered protocol family 1
[    0.598247] pci 0000:00:00.0: Limiting direct PCI/PCI transfers
[    0.599479] pci 0000:00:01.0: PIIX3: Enabling Passive Release
[    0.600491] pci 0000:00:01.0: Activating ISA DMA hang workarounds
[    0.601394] pci 0000:00:02.0: Video device with shadowed ROM at [mem 0x000c0000-0x000dffff]
[    0.602583] PCI: CLS 0 bytes, default 64
[    0.603308] Unpacking initramfs...
[    1.093741] Freeing initrd memory: 5424K (ffff88001fa94000 - ffff88001ffe0000)
[    1.095535] Machine check injector initialized
[    1.096087] Scanning for low memory corruption every 60 seconds
[    1.099766] spin_lock-torture:--- Start of test [debug]: nwriters_stress=2 nreaders_stress=0 stat_interval=60 verbose=1 shuffle_interval=3 stutter=5 shutdown_secs=0 onoff_interval=0 onoff_holdoff=0
[    1.101795] spin_lock-torture: Creating torture_shuffle task
[    1.102453] spin_lock-torture: Creating torture_stutter task
[    1.103126] spin_lock-torture: torture_shuffle task started
[    1.103874] spin_lock-torture: Creating lock_torture_writer task
[    1.104516] spin_lock-torture: torture_stutter task started
[    1.105228] spin_lock-torture: Creating lock_torture_writer task
[    1.105857] spin_lock-torture: lock_torture_writer task started
[    1.106636] spin_lock-torture: Creating lock_torture_stats task
[    1.107366] spin_lock-torture: lock_torture_writer task started
[    1.108100] torture_init_begin: Refusing rcu init: spin_lock running.
[    1.108787] torture_init_begin: One torture test at a time!
[    1.109764] futex hash table entries: 256 (order: 3, 32768 bytes)
[    1.110648] spin_lock-torture: lock_torture_stats task started
[    1.112408] workingset: timestamp_bits=56 max_order=17 bucket_order=0
[    1.113708] fuse init (API version 7.25)
[    1.114488] JFS: nTxBlock = 3601, nTxLock = 28811
[    1.116316] SGI XFS with security attributes, realtime, no debug enabled
[    1.120611] NILFS version 2 loaded
[    1.121153] ocfs2: Registered cluster interface o2cb
[    1.122740] OCFS2 User DLM kernel interface loaded
[    1.127413] gfs2: GFS2 installed
[    1.131402] NET: Registered protocol family 38
[    1.132250] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 249)
[    1.133263] io scheduler noop registered
[    1.134108] io scheduler deadline registered (default)
[    1.138484] test_hexdump: all 1184 tests passed
[    1.139262] test_firmware: interface ready
[    1.159594] test_hash: __hash_32() has no arch implementation to test.
[    1.160386] test_hash: hash_32() has no arch implementation to test.
[    1.161267] test_hash: hash_64() has no arch implementation to test.
[    1.162013] test_hash: 33152 tests passed.
[    1.162773] Running rhashtable test nelem=8, max_size=0, shrinking=0
[    1.163461] Test 00:
[    1.166459]   Adding 50000 keys
[    1.206531]   Traversal complete: counted=50000, nelems=50000, entries=50000, table-jumps=0
[    1.249464]   Traversal complete: counted=50000, nelems=50000, entries=50000, table-jumps=0
[    1.250684]   Deleting 50000 keys
[    1.281782]   Duration of test: 114838215 ns
[    1.282565] Test 01:
[    1.285021]   Adding 50000 keys
[    1.338516]   Traversal complete: counted=50000, nelems=50000, entries=50000, table-jumps=0
[    1.375504]   Traversal complete: counted=50000, nelems=50000, entries=50000, table-jumps=0
[    1.376308]   Deleting 50000 keys
[    1.397091]   Duration of test: 111599223 ns
[    1.397607] Test 02:
[    1.399841]   Adding 50000 keys
[    1.431808]   Traversal complete: counted=50000, nelems=50000, entries=50000, table-jumps=0
[    1.465434]   Traversal complete: counted=50000, nelems=50000, entries=50000, table-jumps=0
[    1.466695]   Deleting 50000 keys
[    1.485728]   Duration of test: 85547916 ns
[    1.486248] Test 03:
[    1.488616]   Adding 50000 keys
[    1.531018]   Traversal complete: counted=50000, nelems=50000, entries=50000, table-jumps=0
[    1.568443]   Traversal complete: counted=50000, nelems=50000, entries=50000, table-jumps=0
[    1.569848]   Deleting 50000 keys
[    1.598449]   Duration of test: 109485243 ns
[    1.599295] Average test time: 105367649
[    1.599966] Testing concurrent rhashtable access from 10 threads
[    1.825394]   thread[7]: rhashtable_insert_fast failed
[    1.826161]   thread[4]: rhashtable_insert_fast failed
[    1.826166]   thread[5]: rhashtable_insert_fast failed
[    1.826170]   thread[1]: rhashtable_insert_fast failed
[    1.826174]   thread[0]: rhashtable_insert_fast failed
[    1.826187] Test failed: thread 0 returned: -12
[    1.826218] Test failed: thread 1 returned: -12
[    1.826231]   thread[6]: rhashtable_insert_fast failed
[    1.826235]   thread[8]: rhashtable_insert_fast failed
[    1.826239]   thread[9]: rhashtable_insert_fast failed
[    1.826957]   thread[2]: rhashtable_insert_fast failed
[    1.826964] Test failed: thread 2 returned: -12
[    1.826979]   thread[3]: rhashtable_insert_fast failed
[    1.826985] Test failed: thread 3 returned: -12
[    1.826993] Test failed: thread 4 returned: -12
[    1.827010] Test failed: thread 5 returned: -12
[    1.827027] Test failed: thread 6 returned: -12
[    1.847600] Test failed: thread 7 returned: -12
[    1.848274] Test failed: thread 8 returned: -12
[    1.848974] Test failed: thread 9 returned: -12
[    1.849617] Started 10 threads, 10 failed
[    1.865501] test_printf: all 260 tests passed
[    1.960517] test_bitmap: all 460506 tests passed
[    1.961341] test_uuid: all 18 tests passed
[    1.962600] crc32: CRC_LE_BITS = 64, CRC_BE BITS = 64
[    1.963472] crc32: self tests passed, processed 225944 bytes in 252851 nsec
[    1.964535] crc32c: CRC_LE_BITS = 64
[    1.965009] crc32c: self tests passed, processed 225944 bytes in 91045 nsec
[    2.000084] crc32_combine: 8373 self tests passed
[    2.042461] crc32c_combine: 8373 self tests passed
[    2.043493] glob: 64 self-tests passed, 0 failed
[    2.044615] no IO addresses supplied
[    2.045395] hgafb: HGA card not detected.
[    2.046018] hgafb: probe of hgafb.0 failed with error -22
[    2.046829] usbcore: registered new interface driver udlfb
[    2.047586] usbcore: registered new interface driver smscufx
[    2.051001] uvesafb: SeaBIOS Developers, SeaBIOS VBE Adapter, Rev. 1, OEM: SeaBIOS VBE(C) 2011, VBE v3.0
[    2.068579] uvesafb: no monitor limits have been set, default refresh rate will be used
[    2.070110] uvesafb: scrolling: redraw
[    2.071010] uvesafb: framebuffer at 0xfd000000, mapped to 0xffffc90002000000, using 16384k, total 16384k
[    2.072407] fb0: VESA VGA frame buffer device
[    2.073261] ipmi message handler version 39.2
[    2.073977] IPMI System Interface driver.
[    2.074766] ipmi_si: Unable to find any System Interface(s)
[    2.075740] IPMI SSIF Interface driver
[    2.076418] IPMI Watchdog: driver initialized
[    2.077202] Copyright (C) 2004 MontaVista Software - IPMI Powerdown via sys_reboot.
[    2.078672] input: Power Button as /devices/LNXSYSTM:00/LNXPWRBN:00/input/input0
[    2.079737] ACPI: Power Button [PWRF]
[    2.080370] Warning: Processor Platform Limit event detected, but not handled.
[    2.081498] Consider compiling CPUfreq support into your kernel.
[    2.102026] tsc: Refined TSC clocksource calibration: 2693.504 MHz
[    2.103134] clocksource: tsc: mask: 0xffffffffffffffff max_cycles: 0x26d345dbcd4, max_idle_ns: 440795302414 ns
[    2.121456] Serial: 8250/16550 driver, 4 ports, IRQ sharing enabled
[    2.150053] 00:05: ttyS0 at I/O 0x3f8 (irq = 4, base_baud = 115200) is a 16550A
[    2.152768] lp: driver loaded but no devices found
[    2.153634] ppdev: user-space parallel port driver
[    2.154455] telclk_interrupt = 0xf non-mcpbl0010 hw.
[    2.154984] smapi::smapi_init, ERROR invalid usSmapiID
[    2.155489] mwave: tp3780i::tp3780I_InitializeBoardData: Error: SMAPI is not available on this machine
[    2.156724] mwave: mwavedd::mwave_init: Error: Failed to initialize board data
[    2.157747] mwave: mwavedd::mwave_init: Error: Failed to initialize
[    2.158434] SyncLink PC Card driver $Revision: 4.34 $, tty major#244
[    2.160611] [drm] Initialized drm 1.1.0 20060810
[    2.161416] usbcore: registered new interface driver udl
[    2.162050] parport_pc 00:04: reported by Plug and Play ACPI
[    2.162818] parport0: PC-style at 0x378, irq 7 [PCSPP,TRISTATE]
[    2.254963] lp0: using parport0 (interrupt-driven).
[    2.256435] lp0: console ready
[    2.258911] dummy-irq: no IRQ given.  Use irq=N
[    2.260948] Silicon Labs C2 port support v. 0.51.0 - (C) 2007 Rodolfo Giometti
[    2.376156] panel: driver version 0.9.5 registered on parport0 (io=0x378).
[    2.377340] usbcore: registered new interface driver rtsx_usb
[    2.378685] usbcore: registered new interface driver pn533_usb
[    2.379545] usbcore: registered new interface driver nfcmrvl
[    2.380316] NCI uart driver 'nfcmrvl_uart [0]' registered
[    2.381171] Uniform Multi-Platform E-IDE driver
[    2.385523] ide-cd driver 5.00
[    2.386263] rdac: device handler registered
[    2.388056] hp_sw: device handler registered
[    2.388784] emc: device handler registered
[    2.391682] ppa: Version 2.07 (for Linux 2.4.x)
[    5.429958] ppa0: failed to claim parport because a pardevice is owning the port for too long time!
[    5.431336] imm: Version 2.05 (for Linux 2.4.0)
[    8.438074] imm0: failed to claim parport because a pardevice is owning the port for too long time!
[    8.439515] st: Version 20160209, fixed bufsize 32768, s/g segs 256
[    8.440492] osst :I: Tape driver with OnStream support version 0.99.4
[    8.440492] osst :I: $Id: osst.c,v 1.73 2005/01/01 21:13:34 wriede Exp $
[    8.447610] scsi host0: scsi_debug: version 1.86 [20160430]
[    8.447610]   dev_size_mb=8, opts=0x0, submit_queues=1, statistics=0
[    8.451256] scsi 0:0:0:0: Direct-Access     Linux    scsi_debug       0186 PQ: 0 ANSI: 7
[    8.457677] Error: Driver 'pata_platform' is already registered, aborting...
[    8.458868] SSFDC read-only Flash Translation layer
[    8.459674] mtdoops: mtd device (mtddev=name/number) must be supplied
[    8.490838] No valid DiskOnChip devices found
[    8.491350] [nandsim] warning: read_byte: unexpected data output cycle, state is STATE_READY return 0x0
[    8.492269] [nandsim] warning: read_byte: unexpected data output cycle, state is STATE_READY return 0x0
[    8.493154] [nandsim] warning: read_byte: unexpected data output cycle, state is STATE_READY return 0x0
[    8.494069] [nandsim] warning: read_byte: unexpected data output cycle, state is STATE_READY return 0x0
[    8.494974] [nandsim] warning: read_byte: unexpected data output cycle, state is STATE_READY return 0x0
[    8.495851] [nandsim] warning: read_byte: unexpected data output cycle, state is STATE_READY return 0x0
[    8.496747] nand: device found, Manufacturer ID: 0x98, Chip ID: 0x39
[    8.497359] nand: Toshiba NAND 128MiB 1,8V 8-bit
[    8.497809] nand: 128 MiB, SLC, erase size: 16 KiB, page size: 512, OOB size: 16
[    8.498547] flash size: 128 MiB
[    8.498854] page size: 512 bytes
[    8.499181] OOB area size: 16 bytes
[    8.499522] sector size: 16 KiB
[    8.499822] pages number: 262144
[    8.500139] pages per sector: 32
[    8.500455] bus width: 8
[    8.500701] bits in sector size: 14
[    8.501046] bits in page size: 9
[    8.501360] bits in OOB size: 4
[    8.501667] flash size with OOB: 135168 KiB
[    8.502075] page address bytes: 4
[    8.502395] sector address bytes: 3
[    8.502731] options: 0x42
[    8.504881] Scanning device for bad blocks
[    8.545783] Creating 1 MTD partitions on "NAND 128MiB 1,8V 8-bit":
[    8.546695] 0x000000000000-0x000008000000 : "NAND simulator partition 0"
[    8.553515] MACsec IEEE 802.1AE
[    8.555513] libphy: Fixed MDIO Bus: probed
[    8.556843] arcnet: arcnet loaded
[    8.557341] arcnet:rfc1051: RFC1051 "simple standard" (`s') encapsulation support loaded
[    8.558504] arcnet:com90io: COM90xx IO-mapped mode support (by David Woodhouse et el.)
[    8.559635] arcnet:com90io: E-mail me if you actually test this driver, please!
[    8.560682] (unnamed net_device) (uninitialized): No autoprobe for IO mapped cards; you must specify the base address!
[    8.562240] ipddp.c:v0.01 8/28/97 Bradford W. Johnson <johns393@maroon.tc.umn.edu>
[    8.563624] ipddp0: Appletalk-IP Decap. mode by Jay Schulist <jschlst@samba.org>
[    8.564750] vcan: Virtual CAN interface driver
[    8.565398] CAN device driver interface
[    8.565993] usbcore: registered new interface driver ems_usb
[    8.566817] usbcore: registered new interface driver esd_usb2
[    8.567680] usbcore: registered new interface driver kvaser_usb
[    8.568555] usbcore: registered new interface driver peak_usb
[    8.569484] sja1000 CAN netdevice driver
[    8.570057] sja1000_isa: insufficient parameters supplied
[    8.570972] e1000: Intel(R) PRO/1000 Network Driver - version 7.3.21-k8-NAPI
[    8.571975] e1000: Copyright (c) 1999-2006 Intel Corporation.
[    8.736374] ACPI: PCI Interrupt Link [LNKC] enabled at IRQ 11
[    9.099626] e1000 0000:00:03.0 eth0: (PCI:33MHz:32-bit) 52:54:00:12:34:56
[    9.100654] e1000 0000:00:03.0 eth0: Intel(R) PRO/1000 Network Connection
[    9.101855] e1000e: Intel(R) PRO/1000 Network Driver - 3.2.6-k
[    9.102699] e1000e: Copyright(c) 1999 - 2015 Intel Corporation.
[    9.103630] igb: Intel(R) Gigabit Ethernet Network Driver - version 5.3.0-k
[    9.104628] igb: Copyright (c) 2007-2014 Intel Corporation.
[    9.105640] ixgbe: Intel(R) 10 Gigabit PCI Express Network Driver - version 4.4.0-k
[    9.106750] ixgbe: Copyright (c) 1999-2016 Intel Corporation.
[    9.110053] NET3 PLIP version 2.4-parport gniibe@mri.co.jp
[    9.110835] plip0: Parallel port at 0x378, using IRQ 7.
[    9.114382] PPP generic driver version 2.4.2
[    9.115201] PPP Deflate Compression module registered
[    9.115943] NET: Registered protocol family 24
[    9.116603] SLIP: version 0.8.4-NET3.019-NEWTTY (dynamic channels, max=256).
[    9.120809] SLIP linefill/keepalive option.
[    9.125633] hdlc: HDLC support module revision 1.22
[    9.126362] DLCI driver v0.35, 4 Jan 1997, mike.mclagan@linux.org.
[    9.127416] LAPB Ethernet driver version 0.02
[    9.128049] pegasus: v0.9.3 (2013/04/25), Pegasus/Pegasus II USB Ethernet driver
[    9.129311] usbcore: registered new interface driver pegasus
[    9.130180] usbcore: registered new interface driver lan78xx
[    9.133751] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
[    9.134696] ehci-pci: EHCI PCI platform driver
[    9.135367] ehci-platform: EHCI generic platform driver
[    9.136219] fotg210_hcd: FOTG210 Host Controller (EHCI) Driver
[    9.145404] usbcore: registered new interface driver cdc_acm
[    9.146363] cdc_acm: USB Abstract Control Model driver for USB modems and ISDN adapters
[    9.147550] usbcore: registered new interface driver usblp
[    9.148369] usbcore: registered new interface driver cdc_wdm
[    9.149385] usbcore: registered new interface driver usbtmc
[    9.150247] usbcore: registered new interface driver uas
[    9.151040] usbcore: registered new interface driver usb-storage
[    9.154123] usbcore: registered new interface driver ums-alauda
[    9.154990] usbcore: registered new interface driver ums-cypress
[    9.155859] usbcore: registered new interface driver ums-datafab
[    9.156764] usbcore: registered new interface driver ums-isd200
[    9.164823] usbcore: registered new interface driver ums-jumpshot
[    9.165826] usbcore: registered new interface driver ums-karma
[    9.166872] usbcore: registered new interface driver ums-onetouch
[    9.167767] usbcore: registered new interface driver ums-realtek
[    9.168659] usbcore: registered new interface driver ums-sddr09
[    9.172702] usbcore: registered new interface driver mdc800
[    9.173654] mdc800: v0.7.5 (30/10/2000):USB Driver for Mustek MDC800 Digital Camera
[    9.174773] usbcore: registered new interface driver microtekX6
[    9.175684] usbcore: registered new interface driver usbserial
[    9.176552] usbcore: registered new interface driver belkin_sa
[    9.185699] usbserial: USB Serial support registered for Belkin / Peracom / GoHubs USB Serial Adapter
[    9.187080] usbcore: registered new interface driver ch341
[    9.187883] usbserial: USB Serial support registered for ch341-uart
[    9.188801] usbcore: registered new interface driver cp210x
[    9.190786] usbserial: USB Serial support registered for cp210x
[    9.191657] usbcore: registered new interface driver cyberjack
[    9.197695] usbserial: USB Serial support registered for Reiner SCT Cyberjack USB card reader
[    9.199063] usbcore: registered new interface driver cypress_m8
[    9.199943] usbserial: USB Serial support registered for DeLorme Earthmate USB
[    9.201014] usbserial: USB Serial support registered for HID->COM RS232 Adapter
[    9.202253] usbserial: USB Serial support registered for Nokia CA-42 V2 Adapter
[    9.203475] usbcore: registered new interface driver usb_debug
[    9.204334] usbserial: USB Serial support registered for debug
[    9.205373] usbcore: registered new interface driver digi_acceleport
[    9.206295] usbserial: USB Serial support registered for Digi 2 port USB adapter
[    9.207358] usbserial: USB Serial support registered for Digi 4 port USB adapter
[    9.208491] usbcore: registered new interface driver io_edgeport
[    9.209549] usbserial: USB Serial support registered for Edgeport 2 port adapter
[    9.210623] usbserial: USB Serial support registered for Edgeport 4 port adapter
[    9.211872] usbserial: USB Serial support registered for Edgeport 8 port adapter
[    9.212960] usbserial: USB Serial support registered for EPiC device
[    9.214041] usbcore: registered new interface driver io_ti
[    9.214857] usbserial: USB Serial support registered for Edgeport TI 1 port adapter
[    9.215967] usbserial: USB Serial support registered for Edgeport TI 2 port adapter
[    9.217320] usbcore: registered new interface driver empeg
[    9.218265] usbserial: USB Serial support registered for empeg
[    9.219120] usbcore: registered new interface driver ipaq
[    9.219903] usbserial: USB Serial support registered for PocketPC PDA
[    9.220875] usbcore: registered new interface driver ipw
[    9.221844] usbserial: USB Serial support registered for IPWireless converter
[    9.222879] usbcore: registered new interface driver iuu_phoenix
[    9.223789] usbserial: USB Serial support registered for iuu_phoenix
[    9.224854] usbcore: registered new interface driver keyspan
[    9.225844] usbserial: USB Serial support registered for Keyspan - (without firmware)
[    9.227000] usbserial: USB Serial support registered for Keyspan 1 port adapter
[    9.228062] usbserial: USB Serial support registered for Keyspan 2 port adapter
[    9.229355] usbserial: USB Serial support registered for Keyspan 4 port adapter
[    9.230449] usbcore: registered new interface driver keyspan_pda
[    9.231498] usbserial: USB Serial support registered for Keyspan PDA
[    9.232427] usbserial: USB Serial support registered for Keyspan PDA - (prerenumeration)
[    9.233783] usbserial: USB Serial support registered for Xircom / Entrega PGS - (prerenumeration)
[    9.235063] usbcore: registered new interface driver kl5kusb105
[    9.235939] usbserial: USB Serial support registered for KL5KUSB105D / PalmConnect
[    9.237254] usbcore: registered new interface driver kobil_sct
[    9.238126] usbserial: USB Serial support registered for KOBIL USB smart card terminal
[    9.239274] usbcore: registered new interface driver metro_usb
[    9.240159] usbserial: USB Serial support registered for Metrologic USB to Serial
[    9.241392] usbcore: registered new interface driver navman
[    9.242356] usbserial: USB Serial support registered for navman
[    9.243236] usbcore: registered new interface driver omninet
[    9.244207] usbserial: USB Serial support registered for ZyXEL - omni.net lcd plus usb
[    9.245570] usbcore: registered new interface driver opticon
[    9.246463] usbserial: USB Serial support registered for opticon
[    9.247355] usbcore: registered new interface driver oti6858
[    9.248197] usbserial: USB Serial support registered for oti6858
[    9.249228] usbcore: registered new interface driver pl2303
[    9.250258] usbserial: USB Serial support registered for pl2303
[    9.251133] usbcore: registered new interface driver qcaux
[    9.251949] usbserial: USB Serial support registered for qcaux
[    9.252794] usbcore: registered new interface driver qcserial
[    9.253831] usbserial: USB Serial support registered for Qualcomm USB modem
[    9.254844] usbcore: registered new interface driver safe_serial
[    9.255891] usbserial: USB Serial support registered for safe_serial
[    9.256841] usbcore: registered new interface driver sierra
[    9.257842] usbserial: USB Serial support registered for Sierra USB modem
[    9.258826] usbcore: registered new interface driver symbolserial
[    9.259724] usbserial: USB Serial support registered for symbol
[    9.260624] usbcore: registered new interface driver visor
[    9.261623] usbserial: USB Serial support registered for Handspring Visor / Palm OS
[    9.262730] usbserial: USB Serial support registered for Sony Clie 5.0
[    9.263867] usbserial: USB Serial support registered for Sony Clie 3.5
[    9.264821] usbcore: registered new interface driver wishbone_serial
[    9.265938] usbserial: USB Serial support registered for wishbone_serial
[    9.266935] usbcore: registered new interface driver whiteheat
[    9.267787] usbserial: USB Serial support registered for Connect Tech - WhiteHEAT - (prerenumeration)
[    9.269339] usbserial: USB Serial support registered for Connect Tech - WhiteHEAT
[    9.270590] usbcore: registered new interface driver xsens_mt
[    9.271469] usbserial: USB Serial support registered for xsens_mt
[    9.272365] usbcore: registered new interface driver adutux
[    9.276249] usbcore: registered new interface driver appledisplay
[    9.277340] usbcore: registered new interface driver cypress_cy7c63
[    9.278277] usbcore: registered new interface driver emi62 - firmware loader
[    9.279310] usbcore: registered new interface driver idmouse
[    9.280184] usbcore: registered new interface driver iowarrior
[    9.285268] usbcore: registered new interface driver isight_firmware
[    9.286232] usbcore: registered new interface driver usblcd
[    9.287077] usbcore: registered new interface driver ldusb
[    9.287882] usbcore: registered new interface driver legousbtower
[    9.288785] usbcore: registered new interface driver rio500
[    9.292792] usbcore: registered new interface driver usbtest
[    9.294034] usbcore: registered new interface driver usb_ehset_test
[    9.297232] usbcore: registered new interface driver trancevibrator
[    9.298160] usbcore: registered new interface driver uss720
[    9.298953] uss720: v0.6:USB Parport Cable driver for Cables using the Lucent Technologies USS720 Chip
[    9.300281] uss720: NOTE: this is a special purpose driver to allow nonstandard
[    9.305497] uss720: protocols (eg. bitbang) over USS720 usb to parallel cables
[    9.306518] uss720: If you just want to connect to a printer, use usblp instead
[    9.309781] usbcore: registered new interface driver usbsevseg
[    9.310670] usbcore: registered new interface driver yurex
[    9.311487] usbcore: registered new interface driver lvs
[    9.312278] usbcore: registered new interface driver cxacru
[    9.313319] usbcore: registered new interface driver ueagle-atm
[    9.314175] xusbatm: malformed module parameters
[    9.315335] udc-core: couldn't find an available UDC - added [g_multi] to list of pending drivers
[    9.316611] usbip_core: usbip_core_init:776: USB/IP Core v1.0.0
[    9.318768] usbcore: registered new device driver usbip-host
[    9.319598] usbip_host: usbip_host_init:302: USB/IP Host Driver v1.0.0
[    9.321207] using random self ethernet address
[    9.321847] using random host ethernet address
[    9.322647] using random self ethernet address
[    9.323308] using random host ethernet address
[    9.324290] usb0: HOST MAC 56:62:73:4e:e1:ea
[    9.324962] usb0: MAC 62:ea:c0:d5:b6:d4
[    9.325849] Mass Storage Function, version: 2009/09/11
[    9.326620] LUN: removable file: (no medium)
[    9.327253] no file given for LUN0
[    9.329262] g_multi usbip-vudc.0: failed to start g_multi: -22
[    9.330180] usbip-vudc: probe of usbip-vudc.0 failed with error -22
[    9.331353] i8042: PNP: PS/2 Controller [PNP0303:KBD,PNP0f13:MOU] at 0x60,0x64 irq 1,12
[    9.333660] serio: i8042 KBD port at 0x60,0x64 irq 1
[    9.334577] serio: i8042 AUX port at 0x60,0x64 irq 12
[    9.335643] parport0: cannot grant exclusive access for device parkbd
[    9.336995] mousedev: PS/2 mouse device common for all mice
[    9.338070] evbug: Connected device: input0 (Power Button at LNXPWRBN/button/input0)
[    9.339711] input: AT Translated Set 2 keyboard as /devices/platform/i8042/serio0/input/input1
[    9.341432] evbug: Connected device: input1 (AT Translated Set 2 keyboard at isa0060/serio0/input0)
[    9.342973] usbcore: registered new interface driver usb_acecad
[    9.343860] usbcore: registered new interface driver aiptek
[    9.344689] usbcore: registered new interface driver gtco
[    9.345639] usbcore: registered new interface driver hanwang
[    9.346636] usbcore: registered new interface driver kbtab
[    9.347979] mk712: device not present
[    9.348663] usbcore: registered new interface driver usbtouchscreen
[    9.350417] rtc_cmos 00:00: RTC can wake from S4
[    9.351548] rtc_cmos 00:00: rtc core: registered rtc_cmos as rtc0
[    9.352670] rtc_cmos 00:00: alarms up to one day, 114 bytes nvram, hpet irqs
[    9.354801] rtc-test rtc-test.0: rtc core: registered test as rtc1
[    9.355947] rtc-test rtc-test.1: rtc core: registered test as rtc2
[    9.357330] usbcore: registered new interface driver i2c-diolan-u2c
[    9.358230] i2c-parport: adapter type unspecified
[    9.358893] i2c-parport-light: adapter type unspecified
[    9.359845] usbcore: registered new interface driver RobotFuzz Open Source InterFace, OSIF
[    9.361386] usbcore: registered new interface driver radioshark
[    9.362267] usbcore: registered new interface driver radioshark2
[    9.363155] usbcore: registered new interface driver dsbr100
[    9.364024] usbcore: registered new interface driver radio-si470x
[    9.364996] usbcore: registered new interface driver radio-keene
[    9.366061] usbcore: registered new interface driver radio-ma901
[    9.367385] usbcore: registered new interface driver radio-raremono
[    9.368375] pps_ldisc: PPS line discipline registered
[    9.369265] pps_parport: parallel port PPS client
[    9.369962] parport0: cannot grant exclusive access for device pps_parport
[    9.370921] pps_parport: couldn't register with parport0
[    9.371714] Driver for 1-wire Dallas network protocol.
[    9.372700] usbcore: registered new interface driver DS9490R
[    9.373814] __power_supply_register: Expected proper parent device for 'test_ac'
[    9.375117] power_supply test_ac: uevent
[    9.375686] power_supply test_ac: POWER_SUPPLY_NAME=test_ac
[    9.376553] __power_supply_register: Expected proper parent device for 'test_battery'
[    9.378028] power_supply test_battery: uevent
[    9.378654] power_supply test_battery: POWER_SUPPLY_NAME=test_battery
[    9.379679] thermal thermal_zone0: power_allocator: sustainable_power will be estimated
[    9.381015] __power_supply_register: Expected proper parent device for 'test_usb'
[    9.382301] power_supply test_usb: uevent
[    9.382880] power_supply test_usb: POWER_SUPPLY_NAME=test_usb
[    9.386651] Bluetooth: Virtual HCI driver ver 1.5
[    9.387536] power_supply test_ac: power_supply_changed
[    9.387581] power_supply test_ac: power_supply_changed_work
[    9.387589] power_supply test_ac: power_supply_update_gen_leds 1
[    9.387607] power_supply test_ac: uevent
[    9.387611] power_supply test_ac: POWER_SUPPLY_NAME=test_ac
[    9.387619] power_supply test_ac: prop ONLINE=1
[    9.392217] power_supply test_battery: power_supply_changed
[    9.392229] power_supply test_battery: power_supply_changed_work
[    9.392236] power_supply test_battery: power_supply_update_bat_leds 2
[    9.392246] power_supply test_battery: uevent
[    9.392250] power_supply test_battery: POWER_SUPPLY_NAME=test_battery
[    9.392259] power_supply test_battery: prop STATUS=Discharging
[    9.392266] power_supply test_battery: prop CHARGE_TYPE=Fast
[    9.392272] power_supply test_battery: prop HEALTH=Good
[    9.392279] power_supply test_battery: prop PRESENT=1
[    9.392285] power_supply test_battery: prop TECHNOLOGY=Li-ion
[    9.392293] power_supply test_battery: prop CHARGE_FULL_DESIGN=100
[    9.392299] power_supply test_battery: prop CHARGE_FULL=100
[    9.392306] power_supply test_battery: prop CHARGE_NOW=50
[    9.392313] power_supply test_battery: prop CAPACITY=50
[    9.392320] power_supply test_battery: prop CAPACITY_LEVEL=Normal
[    9.392327] power_supply test_battery: prop TIME_TO_EMPTY_AVG=3600
[    9.392334] power_supply test_battery: prop TIME_TO_FULL_NOW=3600
[    9.392340] power_supply test_battery: prop MODEL_NAME=Test battery
[    9.392347] power_supply test_battery: prop MANUFACTURER=Linux
[    9.392354] power_supply test_battery: prop SERIAL_NUMBER=4.8.0-rc1-00020-g0937a4d
[    9.392361] power_supply test_battery: prop TEMP=26
[    9.392368] power_supply test_battery: prop VOLTAGE_NOW=3300
[    9.394348] power_supply test_usb: power_supply_changed
[    9.394359] power_supply test_usb: power_supply_changed_work
[    9.394366] power_supply test_usb: power_supply_update_gen_leds 1
[    9.394374] power_supply test_usb: uevent
[    9.394378] power_supply test_usb: POWER_SUPPLY_NAME=test_usb
[    9.394386] power_supply test_usb: prop ONLINE=1
[    9.416824] Bluetooth: HCI UART driver ver 2.3
[    9.417643] Bluetooth: HCI UART protocol H4 registered
[    9.418402] Bluetooth: HCI UART protocol BCSP registered
[    9.419317] Bluetooth: HCI UART protocol LL registered
[    9.420085] Bluetooth: HCI UART protocol Three-wire (H5) registered
[    9.421035] Bluetooth: HCI UART protocol Intel registered
[    9.422004] Bluetooth: HCI UART protocol BCM registered
[    9.422746] Bluetooth: HCI UART protocol AG6XX registered
[    9.423573] usbcore: registered new interface driver bcm203x
[    9.424545] usbcore: registered new interface driver bpa10x
[    9.425569] usbcore: registered new interface driver btusb
[    9.431792] ISDN subsystem Rev: 1.1.2.3/1.1.2.2/none/1.1.2.2/1.1.2.2
[    9.433305] CAPI 2.0 started up with major 68 (middleware)
[    9.434102] Modular ISDN core version 1.1.29
[    9.434834] NET: Registered protocol family 34
[    9.435485] mISDN: Layer-1-over-IP driver Rev. 2.00
[    9.436730] 0 virtual devices registered
[    9.437488] HiSax: Linux Driver for passive ISDN cards
[    9.438228] HiSax: Version 3.5 (kernel)
[    9.438779] HiSax: Layer1 Revision 2.46.2.5
[    9.439574] HiSax: Layer2 Revision 2.30.2.4
[    9.440208] HiSax: TeiMgr Revision 2.20.2.3
[    9.440808] HiSax: Layer3 Revision 2.22.2.3
[    9.441581] HiSax: LinkLayer Revision 2.59.2.4
[    9.442232] HiSax: Total 1 card defined
[    9.442817] HiSax: Card 1 Protocol NONE Id=HiSax (0)
[    9.443556] HiSax: HFC-SX driver Rev. 1.12.2.5
[    9.444220] HFC-SX: invalid chip id 0xf
[    9.444784] HiSax: Card HFC 2BDS0 SX not installed !
[    9.445715] hisax_st5481: ST5481 USB ISDN driver $Revision: 2.4.2.3 $
[    9.446709] usbcore: registered new interface driver st5481_usb
[    9.447558] HFC-S USB: driver module revision 2.3.2.24 date 2007/10/14 loaded, (debug=0)
[    9.448721] usbcore: registered new interface driver hfc_usb
[    9.449668] HFC-4S/8S: Layer 1 driver module for HFC-4S/8S isdn chips, Revision: 1.10
[    9.450938] HFC-4S/8S: (C) 2003 Cornelius Consult, www.cornelius-consult.de
[    9.451970] HFC-4S/8S: found 0 cards
[    9.452605] gigaset: Driver for Gigaset 307x (debug build)
[    9.453556] gigaset: Kernel CAPI interface
[    9.454226] usbcore: registered new interface driver usb_gigaset
[    9.455085] usb_gigaset: USB Driver for Gigaset 307x using M105
[    9.455966] usbcore: registered new interface driver bas_gigaset
[    9.456827] bas_gigaset: USB Driver for Gigaset 307x
[    9.459765] dcdbas dcdbas: Dell Systems Management Base Driver (version 5.6.0-3.2)
[    9.461017] hidraw: raw HID events driver (C) Jiri Kosina
[    9.463636] usbcore: registered new interface driver usbhid
[    9.464453] usbhid: USB HID core driver
[    9.465755] CHRDEV "fwloop" major number 233 goes below the dynamic allocation range
[    9.470103]  fake-fmc-carrier: mezzanine 0
[    9.470705]       Manufacturer: fake-vendor
[    9.471506]       Product name: fake-design-for-testing
[    9.472352] fmc fake-design-for-testing-f001: Driver has no ID: matches all
[    9.473571] fmc_write_eeprom fake-design-for-testing-f001: fmc_write_eeprom: no busid passed, refusing all cards
[    9.476581] NET: Registered protocol family 17
[    9.477377] NET: Registered protocol family 15
[    9.478209] bridge: automatic filtering via arp/ip/ip6tables has been deprecated. Update your scripts to load br_netfilter if you need this.
[    9.480016] NET: Registered protocol family 4
[    9.480683] NET: Registered protocol family 5
[    9.481547] NET: Registered protocol family 9
[    9.482177] X25: Linux Version 0.2
[    9.482687] can: controller area network core (rev 20120528 abi 9)
[    9.483624] NET: Registered protocol family 29
[    9.484390] can: raw protocol (rev 20120528)
[    9.485033] can: broadcast manager protocol (rev 20160617 t)
[    9.485990] can: netlink gateway (rev 20130117) max_hops=1
[    9.486817] Bluetooth: HIDP (Human Interface Emulation) ver 1.2
[    9.487670] Bluetooth: HIDP socket layer initialized
[    9.488387] 8021q: 802.1Q VLAN Support v1.8
[    9.489266] 9pnet: Installing 9P2000 support
[    9.489956] NET: Registered protocol family 37
[    9.490661] Key type dns_resolver registered
[    9.492706] batman_adv: B.A.T.M.A.N. advanced 2016.3 (compatibility version 15) loaded
[    9.494035] mpls_gso: MPLS GSO support
[    9.494590] mce: Unable to init device /dev/mcelog (rc: -5)
[    9.496624] ... APIC ID:      00000000 (0)
[    9.497378] ... APIC VERSION: 01050014
[    9.497927] 0000000000000000000000000000000000000000000000000000000000000000
[    9.499083] 0000000000000000000000000000000000000000000000000000000000000000
[    9.500265] 0000000000000000000000000000000000000000000000000000000000008000
[    9.501582] 
[    9.501853] number of MP IRQ sources: 15.
[    9.502611] number of IO-APIC #0 registers: 24.
[    9.503270] testing the IO APIC.......................
[    9.504031] IO APIC #0......
[    9.504573] .... register #00: 00000000
[    9.505264] .......    : physical APIC id: 00
[    9.505886] .......    : Delivery Type: 0
[    9.506478] .......    : LTS          : 0
[    9.507075] .... register #01: 00170011
[    9.507627] .......     : max redirection entries: 17
[    9.508354] .......     : PRQ implemented: 0
[    9.508984] .......     : IO APIC version: 11
[    9.509775] .... register #02: 00000000
[    9.510492] .......     : arbitration: 00
[    9.511068] .... IRQ redirection table:
[    9.511615] IOAPIC 0:
[    9.511971]  pin00, disabled, edge , high, V(00), IRR(0), S(0), physical, D(00), M(0)
[    9.513262]  pin01, enabled , edge , high, V(31), IRR(0), S(0), logical , D(01), M(1)
[    9.514402]  pin02, enabled , edge , high, V(30), IRR(0), S(0), logical , D(01), M(1)
[    9.515683]  pin03, enabled , edge , high, V(33), IRR(0), S(0), logical , D(01), M(1)
[    9.516815]  pin04, disabled, edge , high, V(34), IRR(0), S(0), logical , D(01), M(1)
[    9.518098]  pin05, disabled, level, high, V(35), IRR(0), S(0), logical , D(01), M(1)
[    9.519223]  pin06, enabled , edge , high, V(36), IRR(0), S(0), logical , D(01), M(1)
[    9.520366]  pin07, enabled , edge , high, V(37), IRR(0), S(0), logical , D(01), M(1)
[    9.521672]  pin08, enabled , edge , high, V(38), IRR(0), S(0), logical , D(01), M(1)
[    9.522802]  pin09, enabled , level, high, V(39), IRR(0), S(0), logical , D(01), M(1)
[    9.524133]  pin0a, disabled, level, high, V(3A), IRR(0), S(0), logical , D(01), M(1)
[    9.525407]  pin0b, disabled, level, high, V(3B), IRR(0), S(0), logical , D(01), M(1)
[    9.526538]  pin0c, enabled , edge , high, V(3C), IRR(0), S(0), logical , D(01), M(1)
[    9.527681]  pin0d, enabled , edge , high, V(3D), IRR(0), S(0), logical , D(01), M(1)
[    9.528937]  pin0e, enabled , edge , high, V(3E), IRR(0), S(0), logical , D(01), M(1)
[    9.530348]  pin0f, enabled , edge , high, V(3F), IRR(0), S(0), logical , D(01), M(1)
[    9.531470]  pin10, disabled, edge , high, V(00), IRR(0), S(0), physical, D(00), M(0)
[    9.532589]  pin11, disabled, edge , high, V(00), IRR(0), S(0), physical, D(00), M(0)
[    9.533882]  pin12, disabled, edge , high, V(00), IRR(0), S(0), physical, D(00), M(0)
[    9.535012]  pin13, disabled, edge , high, V(00), IRR(0), S(0), physical, D(00), M(0)
[    9.536256]  pin14, disabled, edge , high, V(00), IRR(0), S(0), physical, D(00), M(0)
[    9.537530]  pin15, disabled, edge , high, V(00), IRR(0), S(0), physical, D(00), M(0)
[    9.538640]  pin16, disabled, edge , high, V(00), IRR(0), S(0), physical, D(00), M(0)
[    9.539762]  pin17, disabled, edge , high, V(00), IRR(0), S(0), physical, D(00), M(0)
[    9.540891] IRQ to pin mappings:
[    9.541543] IRQ0 -> 0:2
[    9.541948] IRQ1 -> 0:1
[    9.542339] IRQ3 -> 0:3
[    9.542733] IRQ4 -> 0:4
[    9.543316] IRQ5 -> 0:5
[    9.543713] IRQ6 -> 0:6
[    9.544117] IRQ7 -> 0:7
[    9.544511] IRQ8 -> 0:8
[    9.544900] IRQ9 -> 0:9
[    9.545500] IRQ10 -> 0:10
[    9.545911] IRQ11 -> 0:11
[    9.546348] IRQ12 -> 0:12
[    9.546785] IRQ13 -> 0:13
[    9.547226] IRQ14 -> 0:14
[    9.547648] IRQ15 -> 0:15
[    9.548086] .................................... done.
[    9.553580] Btrfs loaded, crc32c=crc32c-generic, assert=on
[    9.554792] Key type trusted registered
[    9.555615] Key type encrypted registered
[    9.561584] console [netcon0] enabled
[    9.562314] netconsole: network logging started
[    9.565300] BIOS EDD facility v0.16 2004-Jun-25, 1 devices found
[    9.566277] Bluetooth: Starting self testing
[    9.566901] Bluetooth: Finished self testing
[    9.580354] Freeing unused kernel memory: 1128K (ffffffff8296e000 - ffffffff82a88000)
[    9.582633] Write protecting the kernel read-only data: 24576k
[    9.585974] Freeing unused kernel memory: 1872K (ffff88000202c000 - ffff880002200000)
[    9.617017] Freeing unused kernel memory: 1268K (ffff8800026c3000 - ffff880002800000)
/etc/rcS.d/S00fbsetup: line 3: /sbin/modprobe: not found

Please wait: booting...
Starting udev
/etc/rcS.d/S03udev: line 72: can't create /proc/sys/kernel/hotplug: nonexistent directory
[    9.812390] power_supply test_ac: uevent
[    9.837967] power_supply test_ac: POWER_SUPPLY_NAME=test_ac
[    9.838878] power_supply test_ac: prop ONLINE=1
[    9.858866] power_supply test_ac: uevent
[    9.859535] power_supply test_ac: POWER_SUPPLY_NAME=test_ac
[    9.860463] power_supply test_ac: prop ONLINE=1
[    9.861380] power_supply test_ac: uevent
[    9.862038] power_supply test_ac: POWER_SUPPLY_NAME=test_ac
[    9.862907] power_supply test_ac: prop ONLINE=1
[    9.863784] power_supply test_battery: uevent
[    9.864531] power_supply test_battery: POWER_SUPPLY_NAME=test_battery
[    9.876010] power_supply test_battery: prop STATUS=Discharging
[    9.878505] power_supply test_battery: prop CHARGE_TYPE=Fast
[    9.883201] power_supply test_battery: prop HEALTH=Good
[    9.886150] power_supply test_battery: prop PRESENT=1
[    9.888997] power_supply test_battery: prop TECHNOLOGY=Li-ion
[    9.891463] power_supply test_battery: prop CHARGE_FULL_DESIGN=100
[    9.892535] power_supply test_battery: prop CHARGE_FULL=100
[    9.893493] power_supply test_battery: prop CHARGE_NOW=50
[    9.894394] power_supply test_battery: prop CAPACITY=50
[    9.895248] power_supply test_battery: prop CAPACITY_LEVEL=Normal
[    9.896233] power_supply test_battery: prop TIME_TO_EMPTY_AVG=3600
[    9.897240] power_supply test_battery: prop TIME_TO_FULL_NOW=3600
[    9.898216] power_supply test_battery: prop MODEL_NAME=Test battery
[    9.899208] power_supply test_battery: prop MANUFACTURER=Linux
[    9.900160] power_supply test_battery: prop SERIAL_NUMBER=4.8.0-rc1-00020-g0937a4d
[    9.901374] power_supply test_battery: prop TEMP=26
[    9.902198] power_supply test_battery: prop VOLTAGE_NOW=3300
[    9.903267] power_supply test_battery: uevent
[    9.903985] power_supply test_battery: POWER_SUPPLY_NAME=test_battery
[    9.905003] power_supply test_battery: prop STATUS=Discharging
[    9.905948] power_supply test_battery: prop CHARGE_TYPE=Fast
[    9.906836] power_supply test_battery: prop HEALTH=Good
[    9.907705] power_supply test_battery: prop PRESENT=1
[    9.908525] power_supply test_battery: prop TECHNOLOGY=Li-ion
[    9.909465] power_supply test_battery: prop CHARGE_FULL_DESIGN=100
[    9.910457] power_supply test_battery: prop CHARGE_FULL=100
[    9.911442] power_supply test_usb: uevent
[    9.911446] power_supply test_usb: POWER_SUPPLY_NAME=test_usb
[    9.911456] power_supply test_usb: prop ONLINE=1
[    9.914248] power_supply test_battery: prop CHARGE_NOW=50
[    9.916972] power_supply test_battery: prop CAPACITY=50
[    9.917813] power_supply test_battery: prop CAPACITY_LEVEL=Normal
[    9.918971] power_supply test_battery: prop TIME_TO_EMPTY_AVG=3600
[    9.920974] power_supply test_battery: prop TIME_TO_FULL_NOW=3600
[    9.921984] power_supply test_battery: prop MODEL_NAME=Test battery
[    9.923964] power_supply test_battery: prop MANUFACTURER=Linux
[    9.924877] power_supply test_battery: prop SERIAL_NUMBER=4.8.0-rc1-00020-g0937a4d
[    9.926973] power_supply test_battery: prop TEMP=26
[    9.927743] power_supply test_battery: prop VOLTAGE_NOW=3300
[    9.928946] power_supply test_battery: uevent
[    9.929656] power_supply test_battery: POWER_SUPPLY_NAME=test_battery
[    9.930677] power_supply test_battery: prop STATUS=Discharging
[    9.931639] power_supply test_battery: prop CHARGE_TYPE=Fast
[    9.932537] power_supply test_battery: prop HEALTH=Good
[    9.933378] power_supply test_battery: prop PRESENT=1
[    9.934282] power_supply test_usb: uevent
[    9.934287] power_supply test_usb: POWER_SUPPLY_NAME=test_usb
[    9.934296] power_supply test_usb: prop ONLINE=1
[    9.934501] power_supply test_usb: uevent
[    9.934506] power_supply test_usb: POWER_SUPPLY_NAME=test_usb
[    9.934514] power_supply test_usb: prop ONLINE=1
[    9.973376] power_supply test_battery: prop TECHNOLOGY=Li-ion
[    9.987879] power_supply test_battery: prop CHARGE_FULL_DESIGN=100
[    9.996491] power_supply test_battery: prop CHARGE_FULL=100
[    9.997509] power_supply test_battery: prop CHARGE_NOW=50
[   10.010311] power_supply test_battery: prop CAPACITY=50
[   10.011394] power_supply test_battery: prop CAPACITY_LEVEL=Normal
[   10.032269] power_supply test_battery: prop TIME_TO_EMPTY_AVG=3600
[   10.039958] power_supply test_battery: prop TIME_TO_FULL_NOW=3600
[   10.048408] power_supply test_battery: prop MODEL_NAME=Test battery
[   10.058094] power_supply test_battery: prop MANUFACTURER=Linux
[   10.066291] power_supply test_battery: prop SERIAL_NUMBER=4.8.0-rc1-00020-g0937a4d
[   10.076334] power_supply test_battery: prop TEMP=26
[   10.077292] power_supply test_battery: prop VOLTAGE_NOW=3300
[   10.242593] (stc): gdata/new_proto/recv or reg_complete_cb not ready
[   10.243788] fmdrv: Failed to get ST write func pointer
[   10.244669] (stc):  chnl_id 8 not supported
[   10.245501] fmdrv: st_unregister failed -93
[   10.246202] fmdrv: Unable to prepare FM CORE
[   10.288720] gfs2: path_lookup on rootfs returned error -2
[   10.325813] init[1] vsyscall attempted with vsyscall=none ip:ffffffffff600400 cs:33 sp:7ffc37a2f788 ax:ffffffffff600400 si:7ffc37a2f6d0 di:7ffc37a2f8c0
[   10.328356] init[1]: segfault at ffffffffff600400 ip ffffffffff600400 sp 00007ffc37a2f788 error 15
[   10.329861] init[1] vsyscall attempted with vsyscall=none ip:ffffffffff600400 cs:33 sp:7ffc37a2ec78 ax:ffffffffff600400 si:7f2150162a4c di:7ffc37a2ed38
[   10.334040] init[1]: segfault at ffffffffff600400 ip ffffffffff600400 sp 00007ffc37a2ec78 error 15
[   10.338487] Kernel panic - not syncing: Attempted to kill init! exitcode=0x0000000b
[   10.338487] 
[   10.339911] CPU: 0 PID: 1 Comm: init Not tainted 4.8.0-rc1-00020-g0937a4d #1
[   10.341177] Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS Debian-1.8.2-1 04/01/2014
[   10.342798]  0000000000000000 ffff88001e53bc28 ffffffff8168cf8a ffff88001e534000
[   10.345177]  ffffffff8256ef20 ffff88001e53bcb8 ffff88001e50ca50 ffff88001e53bca8
[   10.346739]  ffffffff8114e062 ffff880000000010 ffff88001e53bcb8 ffff88001e53bc50
[   10.347970] Call Trace:
[   10.348690]  [<ffffffff8168cf8a>] dump_stack+0x83/0xb9
[   10.351592]  [<ffffffff8114e062>] panic+0xf3/0x2a9
[   10.352386]  [<ffffffff81090e01>] do_exit+0x601/0xde0
[   10.352879]  [<ffffffff8109a283>] ? __sigqueue_free+0x43/0x50
[   10.353511]  [<ffffffff8109a5f7>] ? __dequeue_signal+0x1f7/0x210
[   10.354483]  [<ffffffff810916e2>] do_group_exit+0xa2/0x100
[   10.355324]  [<ffffffff8109e06e>] get_signal+0x68e/0x740
[   10.356155]  [<ffffffff81009233>] do_signal+0x23/0x670
[   10.356983]  [<ffffffff810e0000>] ? do_syslog+0x2c0/0x6a0
[   10.357832]  [<ffffffff810305e3>] ? bad_area_nosemaphore+0x33/0x40
[   10.358825]  [<ffffffff81030cf7>] ? __do_page_fault+0x407/0x4d0
[   10.359738]  [<ffffffff810020c9>] exit_to_usermode_loop+0x69/0xc0
[   10.360680]  [<ffffffff8100241d>] prepare_exit_to_usermode+0x3d/0x70
[   10.361725]  [<ffffffff82025a27>] retint_user+0x8/0x10
[   10.362650] Kernel Offset: disabled

Elapsed time: 20
qemu-system-x86_64 -enable-kvm -cpu SandyBridge -kernel /pkg/linux/x86_64-randconfig-n0-08110915/gcc-6/0937a4d787539e2f5613768662b5e6bbbdf2a2e1/vmlinuz-4.8.0-rc1-00020-g0937a4d -append 'ip=::::vm-kbuild-yocto-x86_64-15::dhcp root=/dev/ram0 user=lkp job=/lkp/scheduled/vm-kbuild-yocto-x86_64-15/boot-1-yocto-minimal-x86_64.cgz-0937a4d787539e2f5613768662b5e6bbbdf2a2e1-20160812-13144-1ekqu5v-1.yaml ARCH=x86_64 kconfig=x86_64-randconfig-n0-08110915 branch=linux-devel/devel-hourly-2016081104 commit=0937a4d787539e2f5613768662b5e6bbbdf2a2e1 BOOT_IMAGE=/pkg/linux/x86_64-randconfig-n0-08110915/gcc-6/0937a4d787539e2f5613768662b5e6bbbdf2a2e1/vmlinuz-4.8.0-rc1-00020-g0937a4d max_uptime=600 RESULT_ROOT=/result/boot/1/vm-kbuild-yocto-x86_64/yocto-minimal-x86_64.cgz/x86_64-randconfig-n0-08110915/gcc-6/0937a4d787539e2f5613768662b5e6bbbdf2a2e1/0 LKP_SERVER=inn debug apic=debug sysrq_always_enabled rcupdate.rcu_cpu_stall_timeout=100 panic=-1 softlockup_panic=1 nmi_watchdog=panic oops=panic load_ramdisk=2 prompt_ramdisk=0 systemd.log_level=err ignore_loglevel earlyprintk=ttyS0,115200 console=ttyS0,115200 console=tty0 vga=normal rw drbd.minor_count=8'  -initrd /fs/sde1/initrd-vm-kbuild-yocto-x86_64-15 -m 512 -smp 1 -device e1000,netdev=net0 -netdev user,id=net0 -boot order=nc -no-reboot -watchdog i6300esb -watchdog-action debug -rtc base=localtime -drive file=/fs/sde1/disk0-vm-kbuild-yocto-x86_64-15,media=disk,if=virtio -pidfile /dev/shm/kboot/pid-vm-kbuild-yocto-x86_64-15 -serial file:/dev/shm/kboot/serial-vm-kbuild-yocto-x86_64-15 -daemonize -display none -monitor null 
