Hi,
On Thu, 4 Aug 2016 07:29:19 -0700
Tony Lindgren <t...@atomide.com> wrote:
> Hi,
>
> * H. Nikolaus Schaller <h...@goldelico.com> [160803 10:07]:
> > All this prevents detection of cable plugin-events and VBUS
> > measurement and setting OTG_EN before charging is attempted.
>
> So I gave this patch a try but it now blocks all deeper SoC idle
> states as the PHY stays active. I think the real fix is to make
> sure the charger behaves independent of the USB PHY state. So
> probably this needs to be fixed in phy-twl4030-usb.c and
> twl4030_charger.c instead. Now it sounds like we're also shutting
> down the charger with the USB PHY.
>
Then there is another power management issue. The patch is not about
fixing every pm issue in musb. That is not only about charging, it is
about enabling/disabling() the phy unbalanced:
Again what happens here without the patch:
musb will be initialized:
omap2430_musb_disable()
calls phy_power_off(), phy will be disabled,
phy->power_count goes to -1.
gadget driver is loaded.
musb_start() is called
omap2430_musb_enable() is called
calls phy_power_on(),
phy->power_count goes to 0,
phy is not powered on because power_count != 1
-> no gadget working, no charging.
Regards
Andreas
--
To unsubscribe from this list: send the line "unsubscribe linux-usb" in
the body of a message to majord...@vger.kernel.org
More majordomo info at http://vger.kernel.org/majordomo-info.html
