Adding over-current-polarity to indicate the over current flag is low active or high active.
Signed-off-by: Li Jun <jun...@nxp.com> --- Documentation/devicetree/bindings/usb/ci-hdrc-usb2.txt | 2 ++ 1 file changed, 2 insertions(+) diff --git a/Documentation/devicetree/bindings/usb/ci-hdrc-usb2.txt b/Documentation/devicetree/bindings/usb/ci-hdrc-usb2.txt index 341dc67..c5d35f4 100644 --- a/Documentation/devicetree/bindings/usb/ci-hdrc-usb2.txt +++ b/Documentation/devicetree/bindings/usb/ci-hdrc-usb2.txt @@ -81,6 +81,8 @@ i.mx specific properties - fsl,usbmisc: phandler of non-core register device, with one argument that indicate usb controller index - disable-over-current: disable over current detect +- over-current-polarity: 0 if the over current signal polarity is low active, + 1 if the over current signal polarity is high active. - external-vbus-divider: enables off-chip resistor divider for Vbus Example: -- 1.9.1 -- To unsubscribe from this list: send the line "unsubscribe linux-usb" in the body of a message to majord...@vger.kernel.org More majordomo info at http://vger.kernel.org/majordomo-info.html
