This patch uses devm_usb_get_phy_by_phandle() instead of usb_get_phy()
for device tree environment. This change is not compabile with the
previous code, but it is no problem because nobody calls usb_bind_phy()
for this driver now.

Signed-off-by: Yoshihiro Shimoda <yoshihiro.shimoda...@renesas.com>
---
 Documentation/devicetree/bindings/usb/renesas_usbhs.txt | 3 ++-
 drivers/usb/renesas_usbhs/mod_gadget.c                  | 7 ++++++-
 2 files changed, 8 insertions(+), 2 deletions(-)

diff --git a/Documentation/devicetree/bindings/usb/renesas_usbhs.txt 
b/Documentation/devicetree/bindings/usb/renesas_usbhs.txt
index b604056..a419aea 100644
--- a/Documentation/devicetree/bindings/usb/renesas_usbhs.txt
+++ b/Documentation/devicetree/bindings/usb/renesas_usbhs.txt
@@ -24,8 +24,9 @@ Optional properties:
   - renesas,buswait: Integer to use BUSWAIT register
   - renesas,enable-gpio: A gpio specifier to check GPIO determining if USB
                         function should be enabled
-  - phys: phandle + phy specifier pair
+  - phys: phandle of *Generic PHY* + phy specifier pair
   - phy-names: must be "usb"
+  - usb-phy: phandle of usb phy
   - dmas: Must contain a list of references to DMA specifiers.
   - dma-names : named "ch%d", where %d is the channel number ranging from zero
                 to the number of channels (DnFIFOs) minus one.
diff --git a/drivers/usb/renesas_usbhs/mod_gadget.c 
b/drivers/usb/renesas_usbhs/mod_gadget.c
index 6e60297..ba1da69 100644
--- a/drivers/usb/renesas_usbhs/mod_gadget.c
+++ b/drivers/usb/renesas_usbhs/mod_gadget.c
@@ -1071,7 +1071,12 @@ int usbhs_mod_gadget_probe(struct usbhs_priv *priv)
                goto usbhs_mod_gadget_probe_err_gpriv;
        }
 
-       gpriv->transceiver = usb_get_phy(USB_PHY_TYPE_UNDEFINED);
+       gpriv->transceiver = devm_usb_get_phy_by_phandle(dev, "usb-phy", 0);
+       if (PTR_ERR(gpriv->transceiver) == -EPROBE_DEFER) {
+               ret = -EPROBE_DEFER;
+               goto err_add_udc;
+       }
+
        dev_info(dev, "%stransceiver found\n",
                 !IS_ERR_OR_NULL(gpriv->transceiver) ? "" : "no ");
 
-- 
1.9.1

--
To unsubscribe from this list: send the line "unsubscribe linux-usb" in
the body of a message to majord...@vger.kernel.org
More majordomo info at  http://vger.kernel.org/majordomo-info.html

Reply via email to