Hi,
John Youn <john.y...@synopsys.com> writes:
> On 6/3/2016 8:59 AM, dingu...@opensource.altera.com wrote:
>> From: Dinh Nguyen <dingu...@opensource.altera.com>
>>
>> Allow for platforms that have a reset controller driver in place to bring
>> the USB IP out of reset.
>>
>> Signed-off-by: Dinh Nguyen <dingu...@opensource.altera.com>
>> Acked-by: John Youn <johny...@synopsys.com>
>> Tested-by: Stefan Wahren <stefan.wah...@i2se.com>
>> ---
>> v7: Use devm_reset_control_get_optional()
>> v6: fix 80 line checkpatch warning in dev_err print
>> v5: updated error conditions for not finding the reset property
>> v4: use dev_dbg() if not a -EPROBE_DEFER
>> v3: fix compile error
>> v2: move to lowlevel_hw_init()
>> ---
>> drivers/usb/dwc2/core.h | 1 +
>> drivers/usb/dwc2/platform.c | 22 ++++++++++++++++++++++
>> 2 files changed, 23 insertions(+)
>>
>> diff --git a/drivers/usb/dwc2/core.h b/drivers/usb/dwc2/core.h
>> index 3c58d63..f748132 100644
>> --- a/drivers/usb/dwc2/core.h
>> +++ b/drivers/usb/dwc2/core.h
>> @@ -837,6 +837,7 @@ struct dwc2_hsotg {
>> void *priv;
>> int irq;
>> struct clk *clk;
>> + struct reset_control *reset;
>>
>> unsigned int queuing_high_bandwidth:1;
>> unsigned int srp_success:1;
>> diff --git a/drivers/usb/dwc2/platform.c b/drivers/usb/dwc2/platform.c
>> index 88629be..d34f169 100644
>> --- a/drivers/usb/dwc2/platform.c
>> +++ b/drivers/usb/dwc2/platform.c
>> @@ -45,6 +45,7 @@
>> #include <linux/platform_device.h>
>> #include <linux/phy/phy.h>
>> #include <linux/platform_data/s3c-hsotg.h>
>> +#include <linux/reset.h>
>>
>> #include <linux/usb/of.h>
>>
>> @@ -337,6 +338,24 @@ static int dwc2_lowlevel_hw_init(struct dwc2_hsotg
>> *hsotg)
>> {
>> int i, ret;
>>
>> + hsotg->reset = devm_reset_control_get_optional(hsotg->dev, "dwc2");
>> + if (IS_ERR(hsotg->reset)) {
>> + ret = PTR_ERR(hsotg->reset);
>> + switch (ret) {
>> + case -ENOENT:
>> + case -ENOTSUPP:
>> + hsotg->reset = NULL;
>> + break;
>> + default:
>> + dev_err(hsotg->dev, "error getting reset control %d\n",
>> + ret);
>> + return ret;
>> + }
>> + }
>> +
>> + if (hsotg->reset)
>> + reset_control_deassert(hsotg->reset);
>> +
>> /* Set default UTMI width */
>> hsotg->phyif = GUSBCFG_PHYIF16;
>>
>> @@ -434,6 +453,9 @@ static int dwc2_driver_remove(struct platform_device
>> *dev)
>> if (hsotg->ll_hw_enabled)
>> dwc2_lowlevel_hw_disable(hsotg);
>>
>> + if (hsotg->reset)
>> + reset_control_assert(hsotg->reset);
>> +
>> return 0;
>> }
>>
>>
>
> Hi Felipe,
>
> This patch depends on this one in the reset control tree.
>
> http://marc.info/?l=linux-usb&m=146473891018262&w=2
>
> Should you also have this patch in your tree? Or what is the best way
> to deal with it?We have two ways of dealing with this: 1. We wait for v4.9 2. Reset folks take this patch together with the rest of the changes I'm fine with either way. Should (2) be chosen here's my ack: Acked-by: Felipe Balbi <felipe.ba...@linux.intel.com> -- balbi
signature.asc
Description: PGP signature
