On 06/17/2016 12:09 PM, Peter Chen wrote:
> The individual driver file name is better to contain module name.
>
> Signed-off-by: Peter Chen <peter.c...@nxp.com>
> ---
> .../power/pwrseq/{pwrseq-simple.txt => mmc-pwrseq-simple.txt} | 0
> drivers/power/pwrseq/Makefile | 4
> ++--
> drivers/power/pwrseq/{pwrseq.c => core.c} | 0
> drivers/power/pwrseq/{pwrseq_simple.c => pwrseq_mmc_simple.c} | 0
> 4 files changed, 2 insertions(+), 2 deletions(-)
> rename Documentation/devicetree/bindings/power/pwrseq/{pwrseq-simple.txt =>
> mmc-pwrseq-simple.txt} (100%)
> rename drivers/power/pwrseq/{pwrseq.c => core.c} (100%)
> rename drivers/power/pwrseq/{pwrseq_simple.c => pwrseq_mmc_simple.c} (100%)
>
> diff --git a/Documentation/devicetree/bindings/power/pwrseq/pwrseq-simple.txt
> b/Documentation/devicetree/bindings/power/pwrseq/mmc-pwrseq-simple.txt
> similarity index 100%
> rename from Documentation/devicetree/bindings/power/pwrseq/pwrseq-simple.txt
> rename to Documentation/devicetree/bindings/power/pwrseq/mmc-pwrseq-simple.txt
> diff --git a/drivers/power/pwrseq/Makefile b/drivers/power/pwrseq/Makefile
> index 9e40e4b..d475e01 100644
> --- a/drivers/power/pwrseq/Makefile
> +++ b/drivers/power/pwrseq/Makefile
> @@ -1,3 +1,3 @@
> -obj-$(CONFIG_POWER_SEQ) += pwrseq.o
> -obj-$(CONFIG_POWER_SEQ_SIMPLE) += pwrseq_simple.o
> +obj-$(CONFIG_POWER_SEQ) += core.o
> +obj-$(CONFIG_POWER_SEQ_SIMPLE) += pwrseq_mmc_simple.o
Although the driver was developed for MMC but it is quite generic (or
rather - mmc independent). The name of the driver is just
"pwrseq_simple" so I think MMC prefix is not needed.
Best regards,
Krzysztof
--
To unsubscribe from this list: send the line "unsubscribe linux-usb" in
the body of a message to majord...@vger.kernel.org
More majordomo info at http://vger.kernel.org/majordomo-info.html
