this patch is in preparation for some further
re-factoring in dwc3 initialization. No functional
changes.
Signed-off-by: Felipe Balbi <felipe.ba...@linux.intel.com>
---
drivers/usb/dwc3/core.c | 16 +++++++---------
drivers/usb/dwc3/core.h | 2 ++
2 files changed, 9 insertions(+), 9 deletions(-)
diff --git a/drivers/usb/dwc3/core.c b/drivers/usb/dwc3/core.c
index 245f4ff6ae16..1f4ac355f384 100644
--- a/drivers/usb/dwc3/core.c
+++ b/drivers/usb/dwc3/core.c
@@ -149,9 +149,8 @@ static int dwc3_soft_reset(struct dwc3 *dwc)
/*
* dwc3_frame_length_adjustment - Adjusts frame length if required
* @dwc3: Pointer to our controller context structure
- * @fladj: Value of GFLADJ_30MHZ to adjust frame length
*/
-static void dwc3_frame_length_adjustment(struct dwc3 *dwc, u32 fladj)
+static void dwc3_frame_length_adjustment(struct dwc3 *dwc)
{
u32 reg;
u32 dft;
@@ -159,15 +158,15 @@ static void dwc3_frame_length_adjustment(struct dwc3
*dwc, u32 fladj)
if (dwc->revision < DWC3_REVISION_250A)
return;
- if (fladj == 0)
+ if (dwc->fladj == 0)
return;
reg = dwc3_readl(dwc->regs, DWC3_GFLADJ);
dft = reg & DWC3_GFLADJ_30MHZ_MASK;
- if (!dev_WARN_ONCE(dwc->dev, dft == fladj,
+ if (!dev_WARN_ONCE(dwc->dev, dft == dwc->fladj,
"request value same as default, ignoring\n")) {
reg &= ~DWC3_GFLADJ_30MHZ_MASK;
- reg |= DWC3_GFLADJ_30MHZ_SDBND_SEL | fladj;
+ reg |= DWC3_GFLADJ_30MHZ_SDBND_SEL | dwc->fladj;
dwc3_writel(dwc->regs, DWC3_GFLADJ, reg);
}
}
@@ -799,7 +798,6 @@ static int dwc3_probe(struct platform_device *pdev)
u8 lpm_nyet_threshold;
u8 tx_de_emphasis;
u8 hird_threshold;
- u32 fladj = 0;
int ret;
@@ -909,7 +907,7 @@ static int dwc3_probe(struct platform_device *pdev)
device_property_read_string(dev, "snps,hsphy_interface",
&dwc->hsphy_interface);
device_property_read_u32(dev, "snps,quirk-frame-length-adjustment",
- &fladj);
+ &dwc->fladj);
if (pdata) {
dwc->maximum_speed = pdata->maximum_speed;
@@ -941,7 +939,7 @@ static int dwc3_probe(struct platform_device *pdev)
tx_de_emphasis = pdata->tx_de_emphasis;
dwc->hsphy_interface = pdata->hsphy_interface;
- fladj = pdata->fladj_value;
+ dwc->fladj = pdata->fladj_value;
}
dwc->lpm_nyet_threshold = lpm_nyet_threshold;
@@ -1022,7 +1020,7 @@ static int dwc3_probe(struct platform_device *pdev)
}
/* Adjust Frame Length */
- dwc3_frame_length_adjustment(dwc, fladj);
+ dwc3_frame_length_adjustment(dwc);
usb_phy_set_suspend(dwc->usb2_phy, 0);
usb_phy_set_suspend(dwc->usb3_phy, 0);
diff --git a/drivers/usb/dwc3/core.h b/drivers/usb/dwc3/core.h
index fb0f9d94f1b2..ce9596b1b1f4 100644
--- a/drivers/usb/dwc3/core.h
+++ b/drivers/usb/dwc3/core.h
@@ -728,6 +728,7 @@ struct dwc3_scratchpad_array {
* @gadget_driver: pointer to the gadget driver
* @regs: base address for our registers
* @regs_size: address space size
+ * @fladj: frame length adjustment
* @nr_scratch: number of scratch buffers
* @u1u2: only used on revisions <1.83a for workaround
* @maximum_speed: maximum speed requested (mainly for testing purposes)
@@ -837,6 +838,7 @@ struct dwc3 {
/* used for suspend/resume */
u32 gctl;
+ u32 fladj;
u32 nr_scratch;
u32 u1u2;
u32 maximum_speed;
--
2.8.3
---------------------------------------------------------------------
Intel Finland Oy
Registered Address: PL 281, 00181 Helsinki
Business Identity Code: 0357606 - 4
Domiciled in Helsinki
This e-mail and any attachments may contain confidential material for
the sole use of the intended recipient(s). Any review or distribution
by others is strictly prohibited. If you are not the intended
recipient, please contact the sender and delete all copies.
--
To unsubscribe from this list: send the line "unsubscribe linux-usb" in
the body of a message to majord...@vger.kernel.org
More majordomo info at http://vger.kernel.org/majordomo-info.html
