Don't make any decisions regarding VBUS session based on ID
status. That is best left to the OTG core.
Pass ID and VBUS events independent of each other so that OTG
core knows exactly what to do.
This makes dual-role with extcon work with OTG irq on OMAP platforms.
Signed-off-by: Roger Quadros <rog...@ti.com>
---
drivers/usb/dwc3/dwc3-omap.c | 14 ++++++--------
1 file changed, 6 insertions(+), 8 deletions(-)
diff --git a/drivers/usb/dwc3/dwc3-omap.c b/drivers/usb/dwc3/dwc3-omap.c
index dd55e08..3cebf9b 100644
--- a/drivers/usb/dwc3/dwc3-omap.c
+++ b/drivers/usb/dwc3/dwc3-omap.c
@@ -231,18 +231,14 @@ static void dwc3_omap_set_mailbox(struct dwc3_omap *omap,
}
val = dwc3_omap_read_utmi_ctrl(omap);
- val &= ~(USBOTGSS_UTMI_OTG_CTRL_IDDIG
- | USBOTGSS_UTMI_OTG_CTRL_VBUSVALID
- | USBOTGSS_UTMI_OTG_CTRL_SESSEND);
- val |= USBOTGSS_UTMI_OTG_CTRL_SESSVALID;
+ val &= ~USBOTGSS_UTMI_OTG_CTRL_IDDIG;
dwc3_omap_write_utmi_ctrl(omap, val);
break;
case OMAP_DWC3_VBUS_VALID:
val = dwc3_omap_read_utmi_ctrl(omap);
val &= ~USBOTGSS_UTMI_OTG_CTRL_SESSEND;
- val |= USBOTGSS_UTMI_OTG_CTRL_IDDIG
- | USBOTGSS_UTMI_OTG_CTRL_VBUSVALID
+ val |= USBOTGSS_UTMI_OTG_CTRL_VBUSVALID
| USBOTGSS_UTMI_OTG_CTRL_SESSVALID;
dwc3_omap_write_utmi_ctrl(omap, val);
break;
@@ -250,13 +246,15 @@ static void dwc3_omap_set_mailbox(struct dwc3_omap *omap,
case OMAP_DWC3_ID_FLOAT:
if (omap->vbus_reg)
regulator_disable(omap->vbus_reg);
+ val = dwc3_omap_read_utmi_ctrl(omap);
+ val |= USBOTGSS_UTMI_OTG_CTRL_IDDIG;
+ dwc3_omap_write_utmi_ctrl(omap, val);
case OMAP_DWC3_VBUS_OFF:
val = dwc3_omap_read_utmi_ctrl(omap);
val &= ~(USBOTGSS_UTMI_OTG_CTRL_SESSVALID
| USBOTGSS_UTMI_OTG_CTRL_VBUSVALID);
- val |= USBOTGSS_UTMI_OTG_CTRL_SESSEND
- | USBOTGSS_UTMI_OTG_CTRL_IDDIG;
+ val |= USBOTGSS_UTMI_OTG_CTRL_SESSEND;
dwc3_omap_write_utmi_ctrl(omap, val);
break;
--
2.7.4
--
To unsubscribe from this list: send the line "unsubscribe linux-usb" in
the body of a message to majord...@vger.kernel.org
More majordomo info at http://vger.kernel.org/majordomo-info.html
