On Mon, May 02, 2016 at 03:18:48PM +0300, Roger Quadros wrote:
> This is to prevent missing symbol build error if OTG is
> enabled (built-in) and HCD core (CONFIG_USB) is module.
> 
> Signed-off-by: Roger Quadros <rog...@ti.com>
> Acked-by: Peter Chen <peter.c...@nxp.com>
> ---
>  drivers/usb/chipidea/otg_fsm.c   |  7 +++++++
>  drivers/usb/common/usb-otg-fsm.c | 15 +++++++++++----
>  drivers/usb/phy/phy-fsl-usb.c    |  7 +++++++
>  include/linux/usb/otg.h          |  2 ++
>  4 files changed, 27 insertions(+), 4 deletions(-)
> 
> diff --git a/drivers/usb/chipidea/otg_fsm.c b/drivers/usb/chipidea/otg_fsm.c
> index 1c0c750..2d8d659 100644
> --- a/drivers/usb/chipidea/otg_fsm.c
> +++ b/drivers/usb/chipidea/otg_fsm.c
> @@ -582,6 +582,12 @@ static struct otg_fsm_ops ci_otg_ops = {
>       .start_gadget = ci_otg_start_gadget,
>  };
>  
> +static struct otg_hcd_ops ci_hcd_ops = {
> +     .usb_bus_start_enum = usb_bus_start_enum,
> +     .usb_control_msg = usb_control_msg,
> +     .usb_hub_find_child = usb_hub_find_child,
> +};
> +
Is it possible have default otg_hcd_ops during OTG register to
avoid define it at every dual-role driver?

Peter
>  int ci_otg_fsm_work(struct ci_hdrc *ci)
>  {
>       /*
> @@ -804,6 +810,7 @@ int ci_hdrc_otg_fsm_init(struct ci_hdrc *ci)
>       ci->otg.fsm.id = hw_read_otgsc(ci, OTGSC_ID) ? 1 : 0;
>       ci->otg.state = OTG_STATE_UNDEFINED;
>       ci->otg.fsm.ops = &ci_otg_ops;
> +     ci->otg.hcd_ops = &ci_hcd_ops;
>       ci->gadget.hnp_polling_support = 1;
>       ci->otg.fsm.host_req_flag = devm_kzalloc(ci->dev, 1, GFP_KERNEL);
>       if (!ci->otg.fsm.host_req_flag)
> diff --git a/drivers/usb/common/usb-otg-fsm.c 
> b/drivers/usb/common/usb-otg-fsm.c
> index 4bfc6a5..2986b66 100644
> --- a/drivers/usb/common/usb-otg-fsm.c
> +++ b/drivers/usb/common/usb-otg-fsm.c
> @@ -141,11 +141,16 @@ static void otg_hnp_polling_work(struct work_struct 
> *work)
>       enum usb_otg_state state = otg->state;
>       u8 flag;
>       int retval;
> +     struct otg_hcd_ops *hcd_ops = otg->hcd_ops;
>  
>       if (state != OTG_STATE_A_HOST && state != OTG_STATE_B_HOST)
>               return;
>  
> -     udev = usb_hub_find_child(otg->host->root_hub, 1);
> +     if (!hcd_ops || !hcd_ops->usb_control_msg ||
> +         !hcd_ops->usb_hub_find_child)
> +             return;
> +
> +     udev = hcd_ops->usb_hub_find_child(otg->host->root_hub, 1);
>       if (!udev) {
>               dev_err(otg->host->controller,
>                       "no usb dev connected, can't start HNP polling\n");
> @@ -154,7 +159,7 @@ static void otg_hnp_polling_work(struct work_struct *work)
>  
>       *fsm->host_req_flag = 0;
>       /* Get host request flag from connected USB device */
> -     retval = usb_control_msg(udev,
> +     retval = hcd_ops->usb_control_msg(udev,
>                               usb_rcvctrlpipe(udev, 0),
>                               USB_REQ_GET_STATUS,
>                               USB_DIR_IN | USB_RECIP_DEVICE,
> @@ -183,7 +188,7 @@ static void otg_hnp_polling_work(struct work_struct *work)
>       if (state == OTG_STATE_A_HOST) {
>               /* Set b_hnp_enable */
>               if (!otg->host->b_hnp_enable) {
> -                     retval = usb_control_msg(udev,
> +                     retval = hcd_ops->usb_control_msg(udev,
>                                       usb_sndctrlpipe(udev, 0),
>                                       USB_REQ_SET_FEATURE, 0,
>                                       USB_DEVICE_B_HNP_ENABLE,
> @@ -262,7 +267,9 @@ static int otg_set_state(struct otg_fsm *fsm, enum 
> usb_otg_state new_state)
>               otg_loc_conn(otg, 0);
>               otg_loc_sof(otg, 1);
>               otg_set_protocol(fsm, PROTO_HOST);
> -             usb_bus_start_enum(otg->host, otg->host->otg_port);
> +             if (otg->hcd_ops && otg->hcd_ops->usb_bus_start_enum)
> +                     otg->hcd_ops->usb_bus_start_enum(otg->host,
> +                                                      otg->host->otg_port);
>               otg_start_hnp_polling(fsm);
>               break;
>       case OTG_STATE_A_IDLE:
> diff --git a/drivers/usb/phy/phy-fsl-usb.c b/drivers/usb/phy/phy-fsl-usb.c
> index 587a187..9dbd9f0 100644
> --- a/drivers/usb/phy/phy-fsl-usb.c
> +++ b/drivers/usb/phy/phy-fsl-usb.c
> @@ -792,6 +792,12 @@ static struct otg_fsm_ops fsl_otg_ops = {
>       .start_gadget = fsl_otg_start_gadget,
>  };
>  
> +static struct otg_hcd_ops fsl_hcd_ops = {
> +     .usb_bus_start_enum = usb_bus_start_enum,
> +     .usb_control_msg = usb_control_msg,
> +     .usb_hub_find_child = usb_hub_find_child,
> +};
> +
>  /* Initialize the global variable fsl_otg_dev and request IRQ for OTG */
>  static int fsl_otg_conf(struct platform_device *pdev)
>  {
> @@ -820,6 +826,7 @@ static int fsl_otg_conf(struct platform_device *pdev)
>  
>       /* Set OTG state machine operations */
>       fsl_otg_tc->otg.fsm.ops = &fsl_otg_ops;
> +     fsl_otg_tc->otg.hcd_ops = &fsl_hcd_ops;
>  
>       /* initialize the otg structure */
>       fsl_otg_tc->phy.label = DRIVER_DESC;
> diff --git a/include/linux/usb/otg.h b/include/linux/usb/otg.h
> index e8a14dc..85b8fb5 100644
> --- a/include/linux/usb/otg.h
> +++ b/include/linux/usb/otg.h
> @@ -12,6 +12,7 @@
>  #include <linux/phy/phy.h>
>  #include <linux/usb/phy.h>
>  #include <linux/usb/otg-fsm.h>
> +#include <linux/usb/hcd.h>
>  
>  struct usb_otg {
>       u8                      default_a;
> @@ -24,6 +25,7 @@ struct usb_otg {
>  
>       enum usb_otg_state      state;
>       struct otg_fsm fsm;
> +     struct otg_hcd_ops      *hcd_ops;
>  
>       /* bind/unbind the host controller */
>       int     (*set_host)(struct usb_otg *otg, struct usb_bus *host);
> -- 
> 2.7.4
> 
> --
> To unsubscribe from this list: send the line "unsubscribe linux-usb" in
> the body of a message to majord...@vger.kernel.org
> More majordomo info at  http://vger.kernel.org/majordomo-info.html

-- 

Best Regards,
Peter Chen
--
To unsubscribe from this list: send the line "unsubscribe linux-usb" in
the body of a message to majord...@vger.kernel.org
More majordomo info at  http://vger.kernel.org/majordomo-info.html

Reply via email to