USB3 devices, because they are much newer, have much
less chance of having issues with larger transfers.
We still keep a limit because anything above 2048
sectors really rendered negligible speed
improvements, so we will simply ignore
that. Transferring 1MiB should already give us
pretty good performance.
Signed-off-by: Felipe Balbi <felipe.ba...@linux.intel.com>
---
drivers/usb/storage/scsiglue.c | 5 +++++
1 file changed, 5 insertions(+)
diff --git a/drivers/usb/storage/scsiglue.c b/drivers/usb/storage/scsiglue.c
index 9da1fb3d0ff4..2bb6a88858ea 100644
--- a/drivers/usb/storage/scsiglue.c
+++ b/drivers/usb/storage/scsiglue.c
@@ -127,6 +127,11 @@ static int slave_configure(struct scsi_device *sdev)
if (queue_max_hw_sectors(sdev->request_queue) > max_sectors)
blk_queue_max_hw_sectors(sdev->request_queue,
max_sectors);
+ } else if (us->pusb_dev->speed >= USB_SPEED_SUPER) {
+ /* USB3 devices will be limited to 2048 sectors. This gives us
+ * better throughput on most devices.
+ */
+ blk_queue_max_hw_sectors(sdev->request_queue, 2048);
} else if (sdev->type == TYPE_TAPE) {
/* Tapes need much higher max_sector limits, so just
* raise it to the maximum possible (4 GB / 512) and
--
2.8.0.rc2
--
To unsubscribe from this list: send the line "unsubscribe linux-usb" in
the body of a message to majord...@vger.kernel.org
More majordomo info at http://vger.kernel.org/majordomo-info.html
