PCI hotpluggable xhci controllers such as some Alpine Ridge solutions will
remove the xhci controller from the PCI bus when the last USB device is
disconnected.
Add a flag to indicate that the host is being removed to avoid queueing
configure_endpoint commands for the dropped endpoints.
For PCI hotplugged controllers this will prevent 5 second command timeouts
For static xhci controllers the configure_endpoint command is not needed
in the removal case as everything will be returned, freed, and the
controller is reset.
For now the flag is only set for PCI connected host controllers.
Cc: <sta...@vger.kernel.org>
Signed-off-by: Mathias Nyman <mathias.ny...@linux.intel.com>
---
drivers/usb/host/xhci-pci.c | 1 +
drivers/usb/host/xhci-ring.c | 3 ++-
drivers/usb/host/xhci.c | 8 +++++---
drivers/usb/host/xhci.h | 1 +
4 files changed, 9 insertions(+), 4 deletions(-)
diff --git a/drivers/usb/host/xhci-pci.c b/drivers/usb/host/xhci-pci.c
index 071b34a..48672fa 100644
--- a/drivers/usb/host/xhci-pci.c
+++ b/drivers/usb/host/xhci-pci.c
@@ -304,6 +304,7 @@ static void xhci_pci_remove(struct pci_dev *dev)
struct xhci_hcd *xhci;
xhci = hcd_to_xhci(pci_get_drvdata(dev));
+ xhci->xhc_state |= XHCI_STATE_REMOVING;
if (xhci->shared_hcd) {
usb_remove_hcd(xhci->shared_hcd);
usb_put_hcd(xhci->shared_hcd);
diff --git a/drivers/usb/host/xhci-ring.c b/drivers/usb/host/xhci-ring.c
index 7cf6621..99b4ff4 100644
--- a/drivers/usb/host/xhci-ring.c
+++ b/drivers/usb/host/xhci-ring.c
@@ -4004,7 +4004,8 @@ static int queue_command(struct xhci_hcd *xhci, struct
xhci_command *cmd,
int reserved_trbs = xhci->cmd_ring_reserved_trbs;
int ret;
- if (xhci->xhc_state) {
+ if ((xhci->xhc_state & XHCI_STATE_DYING) ||
+ (xhci->xhc_state & XHCI_STATE_HALTED)) {
xhci_dbg(xhci, "xHCI dying or halted, can't queue_command\n");
return -ESHUTDOWN;
}
diff --git a/drivers/usb/host/xhci.c b/drivers/usb/host/xhci.c
index 31f73ed..679266b 100644
--- a/drivers/usb/host/xhci.c
+++ b/drivers/usb/host/xhci.c
@@ -147,7 +147,8 @@ static int xhci_start(struct xhci_hcd *xhci)
"waited %u microseconds.\n",
XHCI_MAX_HALT_USEC);
if (!ret)
- xhci->xhc_state &= ~(XHCI_STATE_HALTED | XHCI_STATE_DYING);
+ /* clear state flags. Including dying, halted or removing */
+ xhci->xhc_state = 0;
return ret;
}
@@ -2774,7 +2775,8 @@ int xhci_check_bandwidth(struct usb_hcd *hcd, struct
usb_device *udev)
if (ret <= 0)
return ret;
xhci = hcd_to_xhci(hcd);
- if (xhci->xhc_state & XHCI_STATE_DYING)
+ if ((xhci->xhc_state & XHCI_STATE_DYING) ||
+ (xhci->xhc_state & XHCI_STATE_REMOVING))
return -ENODEV;
xhci_dbg(xhci, "%s called for udev %p\n", __func__, udev);
@@ -3821,7 +3823,7 @@ static int xhci_setup_device(struct usb_hcd *hcd, struct
usb_device *udev,
mutex_lock(&xhci->mutex);
- if (xhci->xhc_state) /* dying or halted */
+ if (xhci->xhc_state) /* dying, removing or halted */
goto out;
if (!udev->slot_id) {
diff --git a/drivers/usb/host/xhci.h b/drivers/usb/host/xhci.h
index 70f215c..6c629c9 100644
--- a/drivers/usb/host/xhci.h
+++ b/drivers/usb/host/xhci.h
@@ -1605,6 +1605,7 @@ struct xhci_hcd {
*/
#define XHCI_STATE_DYING (1 << 0)
#define XHCI_STATE_HALTED (1 << 1)
+#define XHCI_STATE_REMOVING (1 << 2)
/* Statistics */
int error_bitmask;
unsigned int quirks;
--
1.9.1
--
To unsubscribe from this list: send the line "unsubscribe linux-usb" in
the body of a message to majord...@vger.kernel.org
More majordomo info at http://vger.kernel.org/majordomo-info.html
