Hi,
On 06/04/16 06:23, Yoshihiro Shimoda wrote:
> Hi,
>
>> Sent: Tuesday, April 05, 2016 11:05 PM
>>
>> Host controllers that are part of an OTG/dual-role instance
>> need to somehow pass the OTG controller device information
>> to the HCD core.
>>
>> We use platform data to pass the OTG controller device.
>>
>> Signed-off-by: Roger Quadros <rog...@ti.com>
>> ---
>> drivers/usb/host/xhci-plat.c | 35 ++++++++++++++++++++++++++++-------
>> include/linux/usb/xhci_pdriver.h | 3 +++
>> 2 files changed, 31 insertions(+), 7 deletions(-)
>>
>> diff --git a/drivers/usb/host/xhci-plat.c b/drivers/usb/host/xhci-plat.c
>> index 5c15e9b..3d0f597 100644
>> --- a/drivers/usb/host/xhci-plat.c
>> +++ b/drivers/usb/host/xhci-plat.c
>> @@ -230,11 +230,20 @@ static int xhci_plat_probe(struct platform_device
>> *pdev)
>> goto put_usb3_hcd;
>> }
>>
>> - ret = usb_add_hcd(hcd, irq, IRQF_SHARED);
>> + if (pdata->otg_dev)
>
> I think that this should be changed like below:
> if (pdata && pdata->otg_dev)
Indeed, I'll fix this and the remaining occurrences. Thanks.
cheers,
-roger
>
> Otherwise, panic happened on my environment (arm64 / r8a7795 board) because
> the pdata was NULL.
>
>> + ret = usb_otg_add_hcd(hcd, irq, IRQF_SHARED, pdata->otg_dev);
>> + else
>> + ret = usb_add_hcd(hcd, irq, IRQF_SHARED);
>> +
>> if (ret)
>> goto disable_usb_phy;
>>
>> - ret = usb_add_hcd(xhci->shared_hcd, irq, IRQF_SHARED);
>> + if (pdata->otg_dev)
>
> Ditto.
>
>> + ret = usb_otg_add_hcd(xhci->shared_hcd, irq, IRQF_SHARED,
>> + pdata->otg_dev);
>> + else
>> + ret = usb_add_hcd(xhci->shared_hcd, irq, IRQF_SHARED);
>> +
>> if (ret)
>> goto dealloc_usb2_hcd;
>>
>> @@ -242,7 +251,10 @@ static int xhci_plat_probe(struct platform_device *pdev)
>>
>>
>> dealloc_usb2_hcd:
>> - usb_remove_hcd(hcd);
>> + if (pdata->otg_dev)
>
> Ditto.
>
>> + usb_otg_remove_hcd(hcd);
>> + else
>> + usb_remove_hcd(hcd);
>>
>> disable_usb_phy:
>> usb_phy_shutdown(hcd->usb_phy);
>> @@ -260,16 +272,25 @@ put_hcd:
>> return ret;
>> }
>>
>> -static int xhci_plat_remove(struct platform_device *dev)
>> +static int xhci_plat_remove(struct platform_device *pdev)
>> {
>> - struct usb_hcd *hcd = platform_get_drvdata(dev);
>> + struct usb_hcd *hcd = platform_get_drvdata(pdev);
>> struct xhci_hcd *xhci = hcd_to_xhci(hcd);
>> struct clk *clk = xhci->clk;
>> + struct usb_xhci_pdata *pdata = dev_get_platdata(&pdev->dev);
>> +
>> + if (pdata->otg_dev)
>
> Ditto.
>
>> + usb_otg_remove_hcd(xhci->shared_hcd);
>> + else
>> + usb_remove_hcd(xhci->shared_hcd);
>>
>> - usb_remove_hcd(xhci->shared_hcd);
>> usb_phy_shutdown(hcd->usb_phy);
>>
>> - usb_remove_hcd(hcd);
>> + if (pdata->otg_dev)
>
> Ditto.
>
> Best regards,
> Yoshihiro Shimoda
>
>> + usb_otg_remove_hcd(hcd);
>> + else
>> + usb_remove_hcd(hcd);
>> +
>> usb_put_hcd(xhci->shared_hcd);
>>
>> if (!IS_ERR(clk))
>> diff --git a/include/linux/usb/xhci_pdriver.h
>> b/include/linux/usb/xhci_pdriver.h
>> index 376654b..5c68b83 100644
>> --- a/include/linux/usb/xhci_pdriver.h
>> +++ b/include/linux/usb/xhci_pdriver.h
>> @@ -18,10 +18,13 @@
>> *
>> * @usb3_lpm_capable: determines if this xhci platform supports USB3
>> * LPM capability
>> + * @otg_dev: OTG controller device. Only requied if part of
>> + * OTG/dual-role.
>> *
>> */
>> struct usb_xhci_pdata {
>> unsigned usb3_lpm_capable:1;
>> + struct device *otg_dev;
>> };
>>
>> #endif /* __USB_CORE_XHCI_PDRIVER_H */
>> --
>> 2.5.0
>>
>> --
>> To unsubscribe from this list: send the line "unsubscribe linux-usb" in
>> the body of a message to majord...@vger.kernel.org
>> More majordomo info at http://vger.kernel.org/majordomo-info.html
--
To unsubscribe from this list: send the line "unsubscribe linux-usb" in
the body of a message to majord...@vger.kernel.org
More majordomo info at http://vger.kernel.org/majordomo-info.html
