This patch creates new driver that supports StreamLabs usb watchdog
device. This device plugs into 9-pin usb header and connects to
reset pin and reset button on common PC.
USB commands used to communicate with device were reverse
engineered using usbmon.
Signed-off-by: Alexey Klimov <klimov.li...@gmail.com>
---
drivers/watchdog/Kconfig | 15 ++
drivers/watchdog/Makefile | 1 +
drivers/watchdog/streamlabs_wdt.c | 370 ++++++++++++++++++++++++++++++++++++++
3 files changed, 386 insertions(+)
create mode 100644 drivers/watchdog/streamlabs_wdt.c
diff --git a/drivers/watchdog/Kconfig b/drivers/watchdog/Kconfig
index 80825a7..95d8f72 100644
--- a/drivers/watchdog/Kconfig
+++ b/drivers/watchdog/Kconfig
@@ -1705,4 +1705,19 @@ config USBPCWATCHDOG
Most people will say N.
+config USB_STREAMLABS_WATCHDOG
+ tristate "StreamLabs USB watchdog driver"
+ depends on USB
+ ---help---
+ This is the driver for the USB Watchdog dongle from StreamLabs.
+ If you correctly connect reset pins to motherboard Reset pin and
+ to Reset button then this device will simply watch your kernel to make
+ sure it doesn't freeze, and if it does, it reboots your computer
+ after a certain amount of time.
+
+
+ To compile this driver as a module, choose M here: the
+ module will be called streamlabs_wdt.
+
+ Most people will say N. Say yes or M if you want to use such usb
device.
endif # WATCHDOG
diff --git a/drivers/watchdog/Makefile b/drivers/watchdog/Makefile
index f6a6a38..d54fd31 100644
--- a/drivers/watchdog/Makefile
+++ b/drivers/watchdog/Makefile
@@ -25,6 +25,7 @@ obj-$(CONFIG_WDTPCI) += wdt_pci.o
# USB-based Watchdog Cards
obj-$(CONFIG_USBPCWATCHDOG) += pcwd_usb.o
+obj-$(CONFIG_USB_STREAMLABS_WATCHDOG) += streamlabs_wdt.o
# ALPHA Architecture
diff --git a/drivers/watchdog/streamlabs_wdt.c
b/drivers/watchdog/streamlabs_wdt.c
new file mode 100644
index 0000000..031dbc35
--- /dev/null
+++ b/drivers/watchdog/streamlabs_wdt.c
@@ -0,0 +1,370 @@
+/*
+ * StreamLabs USB Watchdog driver
+ *
+ * Copyright (c) 2016 Alexey Klimov <klimov.li...@gmail.com>
+ *
+ * This program is free software; you may redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ */
+
+#include <linux/errno.h>
+#include <linux/kernel.h>
+#include <linux/module.h>
+#include <linux/mutex.h>
+#include <linux/slab.h>
+#include <linux/usb.h>
+#include <linux/watchdog.h>
+
+/*
+ * USB Watchdog device from Streamlabs
+ * http://www.stream-labs.com/products/devices/watchdog/
+ *
+ * USB commands have been reverse engineered using usbmon.
+ */
+
+#define DRIVER_AUTHOR "Alexey Klimov <klimov.li...@gmail.com>"
+#define DRIVER_DESC "StreamLabs USB watchdog driver"
+#define DRIVER_NAME "usb_streamlabs_wdt"
+
+MODULE_AUTHOR(DRIVER_AUTHOR);
+MODULE_DESCRIPTION(DRIVER_DESC);
+MODULE_LICENSE("GPL");
+
+#define USB_STREAMLABS_WATCHDOG_VENDOR 0x13c0
+#define USB_STREAMLABS_WATCHDOG_PRODUCT 0x0011
+
+/* one buffer is used for communication, however transmitted message is only
+ * 32 bytes long */
+#define BUFFER_TRANSFER_LENGTH 32
+#define BUFFER_LENGTH 64
+#define USB_TIMEOUT 350
+
+#define STREAMLABS_CMD_START 0
+#define STREAMLABS_CMD_STOP 1
+
+#define STREAMLABS_WDT_MIN_TIMEOUT 1
+#define STREAMLABS_WDT_MAX_TIMEOUT 46
+
+struct streamlabs_wdt {
+ struct watchdog_device wdt_dev;
+ struct usb_device *usbdev;
+ struct usb_interface *intf;
+
+ struct kref kref;
+ struct mutex lock;
+ u8 *buffer;
+};
+
+static bool nowayout = WATCHDOG_NOWAYOUT;
+
+static int usb_streamlabs_wdt_validate_response(u8 *buf)
+{
+ /* If watchdog device understood the command it will acknowledge
+ * with values 1,2,3,4 at indexes 10, 11, 12, 13 in response message.
+ */
+ if (buf[10] != 1 || buf[11] != 2 || buf[12] != 3 || buf[13] != 4)
+ return -EINVAL;
+
+ return 0;
+}
+
+static int usb_streamlabs_wdt_command(struct watchdog_device *wdt_dev, int cmd)
+{
+ struct streamlabs_wdt *streamlabs_wdt = watchdog_get_drvdata(wdt_dev);
+ int retval;
+ int size;
+ unsigned long timeout_msec;
+ int retry_counter = 10; /* how many times to re-send stop cmd */
+
+ mutex_lock(&streamlabs_wdt->lock);
+
+ timeout_msec = wdt_dev->timeout * MSEC_PER_SEC;
+
+ /* Prepare message that will be sent to device.
+ * This buffer is allocated by kzalloc(). Only initialize required
+ * fields.
+ */
+ if (cmd == STREAMLABS_CMD_START) {
+ streamlabs_wdt->buffer[0] = 0xcc;
+ streamlabs_wdt->buffer[1] = 0xaa;
+ } else { /* assume stop command if it's not start */
+ streamlabs_wdt->buffer[0] = 0xff;
+ streamlabs_wdt->buffer[1] = 0xbb;
+ }
+
+ streamlabs_wdt->buffer[3] = 0x80;
+
+ streamlabs_wdt->buffer[6] = (timeout_msec & 0xff) << 8;
+ streamlabs_wdt->buffer[7] = (timeout_msec & 0xff00) >> 8;
+retry:
+ streamlabs_wdt->buffer[10] = 0x00;
+ streamlabs_wdt->buffer[11] = 0x00;
+ streamlabs_wdt->buffer[12] = 0x00;
+ streamlabs_wdt->buffer[13] = 0x00;
+
+ /* send command to watchdog */
+ retval = usb_interrupt_msg(streamlabs_wdt->usbdev,
+ usb_sndintpipe(streamlabs_wdt->usbdev, 0x02),
+ streamlabs_wdt->buffer, BUFFER_TRANSFER_LENGTH,
+ &size, USB_TIMEOUT);
+
+ if (retval || size != BUFFER_TRANSFER_LENGTH) {
+ dev_err(&streamlabs_wdt->intf->dev,
+ "error %i when submitting interrupt msg\n", retval);
+ retval = -EIO;
+ goto out;
+ }
+
+ /* and read response from watchdog */
+ retval = usb_interrupt_msg(streamlabs_wdt->usbdev,
+ usb_rcvintpipe(streamlabs_wdt->usbdev, 0x81),
+ streamlabs_wdt->buffer, BUFFER_LENGTH,
+ &size, USB_TIMEOUT);
+
+ if (retval || size != BUFFER_LENGTH) {
+ dev_err(&streamlabs_wdt->intf->dev,
+ "error %i when receiving interrupt msg\n", retval);
+ retval = -EIO;
+ goto out;
+ }
+
+ /* check if watchdog actually acked/recognized command */
+ retval = usb_streamlabs_wdt_validate_response(streamlabs_wdt->buffer);
+ if (retval) {
+ dev_err(&streamlabs_wdt->intf->dev,
+ "watchdog didn't ACK command!\n");
+ goto out;
+ }
+
+ /* Transition from enabled to disabled state in this device
+ * doesn't happen immediately. Usually, 2 or 3 (sometimes even 4) stop
+ * commands should be sent until watchdog answers 'I'm stopped!'.
+ * Retry stop command if watchdog fails to answer correctly
+ * about its state. After 10 attempts, report error and return -EIO.
+ */
+ if (cmd == STREAMLABS_CMD_STOP) {
+ if (--retry_counter <= 0) {
+ dev_err(&streamlabs_wdt->intf->dev,
+ "failed to stop watchdog after 9 attempts!\n");
+ retval = -EIO;
+ goto out;
+ }
+ /*
+ * Check if watchdog actually changed state to disabled.
+ * If watchdog is still enabled then reset message and retry
+ * stop command.
+ */
+ if (streamlabs_wdt->buffer[0] != 0xff ||
+ streamlabs_wdt->buffer[1] != 0xbb) {
+ streamlabs_wdt->buffer[0] = 0xff;
+ streamlabs_wdt->buffer[1] = 0xbb;
+ goto retry;
+ }
+ }
+
+out:
+ mutex_unlock(&streamlabs_wdt->lock);
+ return retval;
+}
+
+static int usb_streamlabs_wdt_start(struct watchdog_device *wdt_dev)
+{
+ return usb_streamlabs_wdt_command(wdt_dev, STREAMLABS_CMD_START);
+}
+
+static int usb_streamlabs_wdt_stop(struct watchdog_device *wdt_dev)
+{
+ return usb_streamlabs_wdt_command(wdt_dev, STREAMLABS_CMD_STOP);
+}
+
+static int usb_streamlabs_wdt_settimeout(struct watchdog_device *wdt_dev,
+ unsigned int timeout)
+{
+ struct streamlabs_wdt *streamlabs_wdt = watchdog_get_drvdata(wdt_dev);
+
+ mutex_lock(&streamlabs_wdt->lock);
+ wdt_dev->timeout = timeout;
+ mutex_unlock(&streamlabs_wdt->lock);
+
+ return 0;
+}
+
+static void usb_streamlabs_wdt_release_resources(struct kref *kref)
+{
+ struct streamlabs_wdt *streamlabs_wdt =
+ container_of(kref, struct streamlabs_wdt, kref);
+
+ mutex_destroy(&streamlabs_wdt->lock);
+ kfree(streamlabs_wdt->buffer);
+ kfree(streamlabs_wdt);
+}
+
+static void usb_streamlabs_wdt_ref(struct watchdog_device *wdt_dev)
+{
+ struct streamlabs_wdt *streamlabs_wdt = watchdog_get_drvdata(wdt_dev);
+
+ kref_get(&streamlabs_wdt->kref);
+}
+
+static void usb_streamlabs_wdt_unref(struct watchdog_device *wdt_dev)
+{
+ struct streamlabs_wdt *streamlabs_wdt = watchdog_get_drvdata(wdt_dev);
+
+ kref_put(&streamlabs_wdt->kref, usb_streamlabs_wdt_release_resources);
+}
+
+static const struct watchdog_info streamlabs_wdt_ident = {
+ .options = (WDIOF_SETTIMEOUT | WDIOF_KEEPALIVEPING),
+ .identity = DRIVER_NAME,
+};
+
+static struct watchdog_ops usb_streamlabs_wdt_ops = {
+ .owner = THIS_MODULE,
+ .start = usb_streamlabs_wdt_start,
+ .stop = usb_streamlabs_wdt_stop,
+ .set_timeout = usb_streamlabs_wdt_settimeout,
+ .ref = usb_streamlabs_wdt_ref,
+ .unref = usb_streamlabs_wdt_unref,
+};
+
+static int usb_streamlabs_wdt_probe(struct usb_interface *intf,
+ const struct usb_device_id *id)
+{
+ struct usb_device *dev = interface_to_usbdev(intf);
+ struct streamlabs_wdt *streamlabs_wdt;
+ int retval;
+
+ /* USB IDs of this device appear to be weird/unregistered. Hence, do
+ * an additional check on product and manufacturer.
+ * If there is similar device in the field with same values then
+ * there is stop command in probe() below that checks if the device
+ * behaves as a watchdog. */
+ if (dev->product && dev->manufacturer &&
+ (strncmp(dev->product, "USBkit", 6) != 0
+ || strncmp(dev->manufacturer, "STREAM LABS", 11) != 0))
+ return -ENODEV;
+
+ streamlabs_wdt = kmalloc(sizeof(struct streamlabs_wdt), GFP_KERNEL);
+ if (!streamlabs_wdt) {
+ dev_err(&intf->dev, "kmalloc failed\n");
+ return -ENOMEM;
+ }
+
+ streamlabs_wdt->buffer = kzalloc(BUFFER_LENGTH, GFP_KERNEL);
+ if (!streamlabs_wdt->buffer) {
+ dev_err(&intf->dev, "kzalloc for watchdog->buffer failed\n");
+ retval = -ENOMEM;
+ goto err_nobuf;
+ }
+
+ mutex_init(&streamlabs_wdt->lock);
+
+ streamlabs_wdt->wdt_dev.info = &streamlabs_wdt_ident;
+ streamlabs_wdt->wdt_dev.ops = &usb_streamlabs_wdt_ops;
+ streamlabs_wdt->wdt_dev.timeout = STREAMLABS_WDT_MAX_TIMEOUT;
+ streamlabs_wdt->wdt_dev.max_timeout = STREAMLABS_WDT_MAX_TIMEOUT;
+ streamlabs_wdt->wdt_dev.min_timeout = STREAMLABS_WDT_MIN_TIMEOUT;
+ streamlabs_wdt->wdt_dev.parent = &intf->dev;
+
+ streamlabs_wdt->usbdev = interface_to_usbdev(intf);
+ streamlabs_wdt->intf = intf;
+ usb_set_intfdata(intf, &streamlabs_wdt->wdt_dev);
+ watchdog_set_drvdata(&streamlabs_wdt->wdt_dev, streamlabs_wdt);
+
+ watchdog_init_timeout(&streamlabs_wdt->wdt_dev,
+ streamlabs_wdt->wdt_dev.timeout, &intf->dev);
+ watchdog_set_nowayout(&streamlabs_wdt->wdt_dev, nowayout);
+
+ kref_init(&streamlabs_wdt->kref);
+
+ retval = usb_streamlabs_wdt_stop(&streamlabs_wdt->wdt_dev);
+ if (retval)
+ goto err_wdt_buf;
+
+ retval = watchdog_register_device(&streamlabs_wdt->wdt_dev);
+ if (retval) {
+ dev_err(&intf->dev, "failed to register watchdog device\n");
+ goto err_wdt_buf;
+ }
+
+ dev_info(&intf->dev, "StreamLabs USB watchdog loaded.\n");
+
+ return 0;
+
+err_wdt_buf:
+ mutex_destroy(&streamlabs_wdt->lock);
+ kfree(streamlabs_wdt->buffer);
+
+err_nobuf:
+ kfree(streamlabs_wdt);
+ return retval;
+}
+
+
+
+static int usb_streamlabs_wdt_suspend(struct usb_interface *intf,
+ pm_message_t message)
+{
+ struct streamlabs_wdt *streamlabs_wdt = usb_get_intfdata(intf);
+
+ if (watchdog_active(&streamlabs_wdt->wdt_dev))
+ usb_streamlabs_wdt_command(&streamlabs_wdt->wdt_dev,
+ STREAMLABS_CMD_STOP);
+
+ return 0;
+}
+
+static int usb_streamlabs_wdt_resume(struct usb_interface *intf)
+{
+ struct streamlabs_wdt *streamlabs_wdt = usb_get_intfdata(intf);
+
+ if (watchdog_active(&streamlabs_wdt->wdt_dev))
+ return usb_streamlabs_wdt_command(&streamlabs_wdt->wdt_dev,
+ STREAMLABS_CMD_START);
+
+ return 0;
+}
+
+static void usb_streamlabs_wdt_disconnect(struct usb_interface *intf)
+{
+ struct streamlabs_wdt *streamlabs_wdt = usb_get_intfdata(intf);
+
+ /* First, stop sending USB messages to device. */
+ mutex_lock(&streamlabs_wdt->lock);
+ usb_set_intfdata(intf, NULL);
+ streamlabs_wdt->usbdev = NULL;
+ mutex_unlock(&streamlabs_wdt->lock);
+
+ /* after commincation with device has stopped we can
+ * unregister watchdog device. unref callback will clear the rest on
+ * release of device if it was opened.
+ */
+ watchdog_unregister_device(&streamlabs_wdt->wdt_dev);
+ kref_put(&streamlabs_wdt->kref, usb_streamlabs_wdt_release_resources);
+}
+
+static struct usb_device_id usb_streamlabs_wdt_device_table[] = {
+ { USB_DEVICE(USB_STREAMLABS_WATCHDOG_VENDOR,
USB_STREAMLABS_WATCHDOG_PRODUCT) },
+ { } /* Terminating entry */
+};
+
+MODULE_DEVICE_TABLE(usb, usb_streamlabs_wdt_device_table);
+
+static struct usb_driver usb_streamlabs_wdt_driver = {
+ .name = DRIVER_NAME,
+ .probe = usb_streamlabs_wdt_probe,
+ .disconnect = usb_streamlabs_wdt_disconnect,
+ .suspend = usb_streamlabs_wdt_suspend,
+ .resume = usb_streamlabs_wdt_resume,
+ .reset_resume = usb_streamlabs_wdt_resume,
+ .id_table = usb_streamlabs_wdt_device_table,
+};
+
+module_usb_driver(usb_streamlabs_wdt_driver);
--
2.7.0.rc3
--
To unsubscribe from this list: send the line "unsubscribe linux-usb" in
the body of a message to majord...@vger.kernel.org
More majordomo info at http://vger.kernel.org/majordomo-info.html
