Hi,

Liu Xiang <liu.xia...@zte.com.cn> writes:
> In multi-core SoC, if enable USB endpoint/transmit urb/disable 
> USB endpoint repeatedly,it can cause a NULL pointer dereference bug:
>
> Unable to handle kernel NULL pointer dereference at virtual address 00000010
> pgd = d3eb4000
> [00000010] *pgd=00000000
> Internal error: Oops: 5 [#1] PREEMPT SMP
> Pid: 1017, comm:          mediaserver
> CPU: 0    Not tainted  (3.0.101-ZXICTOS_V2.00.20_P2B4_ZTE_ZX296700_ASIC+ #2)
> PC is at musb_h_disable+0xfc/0x15c
> LR is at musb_h_disable+0xfc/0x15c
> pc : [<c0353de8>]    lr : [<c0353de8>]    psr: 60070093
> sp : d3e5bc80  ip : 00000027  fp : d3e5bca4
> r10: 00000000  r9 : ffffff94  r8 : 00000080
> r7 : 60070013  r6 : d45900f0  r5 : d4717720  r4 : cee2d860
> r3 : 00000000  r2 : c0875628  r1 : d3e5bbc0  r0 : 0000002a
> Flags: nZCv  IRQs off  FIQs on  Mode SVC_32  ISA ARM  Segment user
> Control: 18c53c7d  Table: b3eb404a  DAC: 00000015
> [<c00519d0>] (__dabt_svc+0x70/0xa0) from [<c0353de8>] 
> (musb_h_disable+0xfc/0x15c)
> [<c0353de8>] (musb_h_disable+0xfc/0x15c) from [<c032f160>] 
> (usb_hcd_disable_endpoint+0x3c/0x44)
> [<c032f160>] (usb_hcd_disable_endpoint+0x3c/0x44) from [<c0331504>] 
> (usb_disable_endpoint+0x64/0x7c)
> [<c0331504>] (usb_disable_endpoint+0x64/0x7c) from [<c0331564>] 
> (usb_disable_interface+0x48/0x58)
> [<c0331564>] (usb_disable_interface+0x48/0x58) from [<c0331bcc>] 
> (usb_set_interface+0x158/0x274)
> [<c0331bcc>] (usb_set_interface+0x158/0x274) from [<c03a8a30>] 
> (uvc_video_enable+0x78/0x9c)
> [<c03a8a30>] (uvc_video_enable+0x78/0x9c) from [<c03a66c4>] 
> (uvc_v4l2_do_ioctl+0xd08/0x12ec)
> [<c03a66c4>] (uvc_v4l2_do_ioctl+0xd08/0x12ec) from [<c036c044>] 
> (video_usercopy+0x144/0x500)
> [<c036c044>] (video_usercopy+0x144/0x500) from [<c03a5444>] 
> (uvc_v4l2_ioctl+0x2c/0x74)
> [<c03a5444>] (uvc_v4l2_ioctl+0x2c/0x74) from [<c036b208>] 
> (v4l2_ioctl+0x94/0x154)
> [<c036b208>] (v4l2_ioctl+0x94/0x154) from [<c0128628>] 
> (do_vfs_ioctl+0x84/0x5ac)
> [<c0128628>] (do_vfs_ioctl+0x84/0x5ac) from [<c0128bc8>] (sys_ioctl+0x78/0x80)
> [<c0128bc8>] (sys_ioctl+0x78/0x80) from [<c0052000>] 
> (ret_fast_syscall+0x0/0x30)
>
> Considering the following execution sequence:
> CPU0                           CPU1
> musb_urb_dequeue
>  spin_lock_irqsave(&musb->lock, flags);
>   ready = qh->is_ready;
>    qh->is_ready = 0;
>     musb_giveback(musb, urb, 0);
>      spin_unlock(&musb->lock);
>                                zx296702_musb_interrupt
>                               musb_interrupt
>                                spin_lock_irqsave(&musb->lock, flags);
>                                 musb_advance_schedule
>                                  ready = qh->is_ready;
>                                   qh->is_ready = 0;
>                                    musb_giveback(musb, urb, status);
>                                     spin_unlock(&musb->lock);
>       spin_lock(&musb->lock);
>        qh->is_ready = ready;
>         spin_unlock_irqrestore(&musb->lock, flags);
>                                      spin_lock(&musb->lock);
>                                       qh->is_ready = ready;
>
> When musb_urb_dequeue is called finally, the qh->is_ready has already 
> been set to 0 in error.Thus the recycling qh job in musb_urb_dequeue 
> can not be done. That results in accessing empty qh in musb_h_disable.
> So the qh in musb_h_disable should be checked.If the qh is emtpy, 
> then recycle it and go to exit directly.              
>
> Signed-off-by: Liu Xiang <liu.xia...@zte.com.cn>
> ---
>  drivers/usb/musb/musb_host.c | 7 ++++++-
>  1 file changed, 6 insertions(+), 1 deletion(-)
>
> diff --git a/drivers/usb/musb/musb_host.c b/drivers/usb/musb/musb_host.c
> index 795a45b..438f5b4 100644
> --- a/drivers/usb/musb/musb_host.c
> +++ b/drivers/usb/musb/musb_host.c
> @@ -2515,7 +2515,12 @@ musb_h_disable(struct usb_hcd *hcd, struct 
> usb_host_endpoint *hep)
>       qh->is_ready = 0;
>       if (musb_ep_get_qh(qh->hw_ep, is_in) == qh) {
>               urb = next_urb(qh);
> -
> +             if (urb == NULL) {

!urb would be nicer here.

Also, adding Bin as he'll become the new MUSB maintainer.

> +                     qh->hep->hcpriv = NULL;
> +                     list_del(&qh->ring);
> +                     kfree(qh);
> +                     goto exit;
> +             }
>               /* make software (then hardware) stop ASAP */
>               if (!urb->unlinked)
>                       urb->status = -ESHUTDOWN;
> -- 
> 1.9.1
>
>
> --
> To unsubscribe from this list: send the line "unsubscribe linux-usb" in
> the body of a message to majord...@vger.kernel.org
> More majordomo info at  http://vger.kernel.org/majordomo-info.html

-- 
balbi

Attachment: signature.asc
Description: PGP signature

Reply via email to