On 02/15/2016 12:21 PM, Geert Uytterhoeven wrote:
If NO_DMA=y:
ERROR: "dma_pool_destroy" [drivers/usb/core/usbcore.ko] undefined!
ERROR: "bad_dma_ops" [drivers/usb/core/usbcore.ko] undefined!
ERROR: "dma_pool_free" [drivers/usb/core/usbcore.ko] undefined!
ERROR: "dma_pool_alloc" [drivers/usb/core/usbcore.ko] undefined!
ERROR: "dma_pool_create" [drivers/usb/core/usbcore.ko] undefined!
Add a few checks for CONFIG_HAS_DMA to fix this.
Signed-off-by: Geert Uytterhoeven <[email protected]>
---
drivers/usb/core/buffer.c | 18 ++++++++++++------
drivers/usb/core/hcd.c | 14 ++++++++++----
2 files changed, 22 insertions(+), 10 deletions(-)
This does look nicer than my patch.
diff --git a/drivers/usb/core/buffer.c b/drivers/usb/core/buffer.c
index 89f2e7765093955b..2741566ee4f25849 100644
--- a/drivers/usb/core/buffer.c
+++ b/drivers/usb/core/buffer.c
@@ -62,8 +62,9 @@ int hcd_buffer_create(struct usb_hcd *hcd)
char name[16];
int i, size;
- if (!hcd->self.controller->dma_mask &&
- !(hcd->driver->flags & HCD_LOCAL_MEM))
+ if (!IS_ENABLED(CONFIG_HAS_DMA) ||
+ (!hcd->self.controller->dma_mask &&
+ !(hcd->driver->flags & HCD_LOCAL_MEM)))
return 0;
for (i = 0; i < HCD_BUFFER_POOLS; i++) {
@@ -93,6 +94,9 @@ void hcd_buffer_destroy(struct usb_hcd *hcd)
{
int i;
+ if (!IS_ENABLED(CONFIG_HAS_DMA))
+ return;
+
for (i = 0; i < HCD_BUFFER_POOLS; i++) {
struct dma_pool *pool = hcd->pool[i];
@@ -119,8 +123,9 @@ void *hcd_buffer_alloc(
int i;
/* some USB hosts just use PIO */
- if (!bus->controller->dma_mask &&
- !(hcd->driver->flags & HCD_LOCAL_MEM)) {
+ if (!IS_ENABLED(CONFIG_HAS_DMA) ||
+ (!bus->controller->dma_mask &&
+ !(hcd->driver->flags & HCD_LOCAL_MEM))) {
*dma = ~(dma_addr_t) 0;
return kmalloc(size, mem_flags);
}
@@ -145,8 +150,9 @@ void hcd_buffer_free(
if (!addr)
return;
- if (!bus->controller->dma_mask &&
- !(hcd->driver->flags & HCD_LOCAL_MEM)) {
+ if (!IS_ENABLED(CONFIG_HAS_DMA) ||
+ (!bus->controller->dma_mask &&
+ !(hcd->driver->flags & HCD_LOCAL_MEM))) {
kfree(addr);
return;
}
diff --git a/drivers/usb/core/hcd.c b/drivers/usb/core/hcd.c
index df0e3b92533a745f..f6caa7ba6f05655b 100644
--- a/drivers/usb/core/hcd.c
+++ b/drivers/usb/core/hcd.c
@@ -1408,12 +1408,15 @@ static void hcd_free_coherent(struct usb_bus *bus,
dma_addr_t *dma_handle,
void usb_hcd_unmap_urb_setup_for_dma(struct usb_hcd *hcd, struct urb *urb)
{
+#ifdef CONFIG_HAS_DMA
if (urb->transfer_flags & URB_SETUP_MAP_SINGLE)
dma_unmap_single(hcd->self.controller,
urb->setup_dma,
sizeof(struct usb_ctrlrequest),
DMA_TO_DEVICE);
- else if (urb->transfer_flags & URB_SETUP_MAP_LOCAL)
+ else
+#endif /* CONFIG_HAS_DMA */
+ if (urb->transfer_flags & URB_SETUP_MAP_LOCAL)
Why not use IS_ENABLED() here as well instead of the ifdef?
hcd_free_coherent(urb->dev->bus,
&urb->setup_dma,
(void **) &urb->setup_packet,
@@ -1440,6 +1443,7 @@ void usb_hcd_unmap_urb_for_dma(struct usb_hcd *hcd,
struct urb *urb)
usb_hcd_unmap_urb_setup_for_dma(hcd, urb);
dir = usb_urb_dir_in(urb) ? DMA_FROM_DEVICE : DMA_TO_DEVICE;
+#ifdef CONFIG_HAS_DMA
if (urb->transfer_flags & URB_DMA_MAP_SG)
dma_unmap_sg(hcd->self.controller,
urb->sg,
@@ -1455,7 +1459,9 @@ void usb_hcd_unmap_urb_for_dma(struct usb_hcd *hcd,
struct urb *urb)
urb->transfer_dma,
urb->transfer_buffer_length,
dir);
- else if (urb->transfer_flags & URB_MAP_LOCAL)
+ else
+#endif /* CONFIG_HAS_DMA */
+ if (urb->transfer_flags & URB_MAP_LOCAL)
and here.
hcd_free_coherent(urb->dev->bus,
&urb->transfer_dma,
&urb->transfer_buffer,
@@ -1492,7 +1498,7 @@ int usb_hcd_map_urb_for_dma(struct usb_hcd *hcd, struct
urb *urb,
if (usb_endpoint_xfer_control(&urb->ep->desc)) {
if (hcd->self.uses_pio_for_control)
return ret;
- if (hcd->self.uses_dma) {
+ if (IS_ENABLED(CONFIG_HAS_DMA) && hcd->self.uses_dma) {
urb->setup_dma = dma_map_single(
hcd->self.controller,
urb->setup_packet,
@@ -1518,7 +1524,7 @@ int usb_hcd_map_urb_for_dma(struct usb_hcd *hcd, struct
urb *urb,
dir = usb_urb_dir_in(urb) ? DMA_FROM_DEVICE : DMA_TO_DEVICE;
if (urb->transfer_buffer_length != 0
&& !(urb->transfer_flags & URB_NO_TRANSFER_DMA_MAP)) {
- if (hcd->self.uses_dma) {
+ if (IS_ENABLED(CONFIG_HAS_DMA) && hcd->self.uses_dma) {
if (urb->num_sgs) {
int n;
Assuming this still lets the platform actually run USB drivers (which it
looks like it does -- I still have to test it), then I'm all for it. You
may want to steal parts of the commit description for my last patch to
include that this actually allows using USB on UML and the references to
the discussion.
Thanks!
Vegard
--
To unsubscribe from this list: send the line "unsubscribe linux-usb" in
the body of a message to [email protected]
More majordomo info at http://vger.kernel.org/majordomo-info.html
