[RFC PATCH 5/5] ARM: dts: imx6qdl-udoo.dtsi: fix onboard USB HUB property

[Peter Chen]

The current dts describes USB HUB's property at USB controller's
entry, it is improper. The USB HUB should be the child node
under USB controller.

Signed-off-by: Peter Chen <peter.c...@freescale.com>
---
 arch/arm/boot/dts/imx6qdl-udoo.dtsi | 35 ++++++++++++++---------------------
 1 file changed, 14 insertions(+), 21 deletions(-)

diff --git a/arch/arm/boot/dts/imx6qdl-udoo.dtsi 
b/arch/arm/boot/dts/imx6qdl-udoo.dtsi
index 1211da8..7155afb 100644
--- a/arch/arm/boot/dts/imx6qdl-udoo.dtsi
+++ b/arch/arm/boot/dts/imx6qdl-udoo.dtsi
@@ -9,6 +9,8 @@
  *
  */
 
+#include <dt-bindings/gpio/gpio.h>
+
 / {
        chosen {
                stdout-path = &uart2;
@@ -17,23 +19,6 @@
        memory {
                reg = <0x10000000 0x40000000>;
        };
-
-       regulators {
-               compatible = "simple-bus";
-               #address-cells = <1>;
-               #size-cells = <0>;
-
-               reg_usb_h1_vbus: regulator@0 {
-                       compatible = "regulator-fixed";
-                       reg = <0>;
-                       regulator-name = "usb_h1_vbus";
-                       regulator-min-microvolt = <5000000>;
-                       regulator-max-microvolt = <5000000>;
-                       enable-active-high;
-                       startup-delay-us = <2>; /* USB2415 requires a POR of 1 
us minimum */
-                       gpio = <&gpio7 12 0>;
-               };
-       };
 };
 
 &fec {
@@ -119,11 +104,19 @@
 };
 
 &usbh1 {
-       pinctrl-names = "default";
-       pinctrl-0 = <&pinctrl_usbh>;
-       vbus-supply = <&reg_usb_h1_vbus>;
-       clocks = <&clks 201>;
        status = "okay";
+
+       #address-cells = <1>;
+       #size-cells = <0>;
+       hub: usb2415@01 {
+               compatible = "generic-onboard-device";
+               reg = <0x01>;
+               pinctrl-names = "default";
+               pinctrl-0 = <&pinctrl_usbh>;
+               clocks = <&clks IMX6QDL_CLK_CKO>;
+               reset-gpios = <&gpio7 12 GPIO_ACTIVE_LOW>;
+               reset-duration-us = <2>;
+       };
 };
 
 &usdhc3 {
-- 
1.9.1

--
To unsubscribe from this list: send the line "unsubscribe linux-usb" in
the body of a message to majord...@vger.kernel.org
More majordomo info at  http://vger.kernel.org/majordomo-info.html