The reset is required to get reset values of the hardware parameters but
the force mode is not. Move the base reset into dwc2_get_hwparams() and
do the reset and force mode afterwards.

Signed-off-by: John Youn <johny...@synopsys.com>
---
 drivers/usb/dwc2/core.c     | 5 +++++
 drivers/usb/dwc2/platform.c | 8 ++------
 2 files changed, 7 insertions(+), 6 deletions(-)

diff --git a/drivers/usb/dwc2/core.c b/drivers/usb/dwc2/core.c
index 382f563..7090050 100644
--- a/drivers/usb/dwc2/core.c
+++ b/drivers/usb/dwc2/core.c
@@ -3116,6 +3116,7 @@ int dwc2_get_hwparams(struct dwc2_hsotg *hsotg)
        u32 hwcfg1, hwcfg2, hwcfg3, hwcfg4;
        u32 hptxfsiz, grxfsiz, gnptxfsiz;
        u32 gusbcfg = 0;
+       int retval;
 
        /*
         * Attempt to ensure this device is really a DWC_otg Controller.
@@ -3135,6 +3136,10 @@ int dwc2_get_hwparams(struct dwc2_hsotg *hsotg)
                hw->snpsid >> 12 & 0xf, hw->snpsid >> 8 & 0xf,
                hw->snpsid >> 4 & 0xf, hw->snpsid & 0xf, hw->snpsid);
 
+       retval = dwc2_core_reset(hsotg);
+       if (retval)
+               return retval;
+
        hwcfg1 = dwc2_readl(hsotg->regs + GHWCFG1);
        hwcfg2 = dwc2_readl(hsotg->regs + GHWCFG2);
        hwcfg3 = dwc2_readl(hsotg->regs + GHWCFG3);
diff --git a/drivers/usb/dwc2/platform.c b/drivers/usb/dwc2/platform.c
index f18d50f..12826a1 100644
--- a/drivers/usb/dwc2/platform.c
+++ b/drivers/usb/dwc2/platform.c
@@ -510,12 +510,6 @@ static int dwc2_driver_probe(struct platform_device *dev)
        if (retval)
                return retval;
 
-       /*
-        * Reset before dwc2_get_hwparams() then it could get power-on real
-        * reset value form registers.
-        */
-       dwc2_core_reset_and_force_mode(hsotg);
-
        /* Detect config values from hardware */
        retval = dwc2_get_hwparams(hsotg);
        if (retval)
@@ -524,6 +518,8 @@ static int dwc2_driver_probe(struct platform_device *dev)
        /* Validate parameter values */
        dwc2_set_parameters(hsotg, params);
 
+       dwc2_core_reset_and_force_mode(hsotg);
+
        if (hsotg->dr_mode != USB_DR_MODE_HOST) {
                retval = dwc2_gadget_init(hsotg, irq);
                if (retval)
-- 
2.6.3

--
To unsubscribe from this list: send the line "unsubscribe linux-usb" in
the body of a message to majord...@vger.kernel.org
More majordomo info at  http://vger.kernel.org/majordomo-info.html

Reply via email to