Hi Li, Li Jun <b47...@freescale.com> writes: >> > I am sorry I did not consider the legacy OTG design, this patch should >> > be dropped. >> >> there is no "legacy" OTG design. OTG requires a bus suspend to enter >> HNP, and that's achieved by stopping all transfers and avoid new URB >> submission so usbcore can put the bus in suspend (by means of USB >> autosuspend). If you're bypassing that in the OTG FSM thing, that needs >> to be fixed ASAP as that makes it a lot harder for any generic changes >> in usbcore to be validated. Specially when you consider not many will >> have whatever special HW which, likely, doesn't even work with mainline >> to validate a change. >> >> Please, make sure to fix that design so that HNP *always* goes through >> the proper code path. If you have devices which would prevent HNP >> because their class driver (host side driver) would never autosuspend, >> fix that as well. >> > > Hi Felipe > > I am going to fix this as you suggested, for those interface drivers which > do not support autosuspend, should we > - Fix its driver by enable autosuspend and adding suspend()&resume()? or > - Unbind its interface before autosuspend the usb device?
IMO it's best if you could add proper autosuspend device to such drivers. -- balbi
signature.asc
Description: PGP signature
