On Sat, Nov 28, 2015 at 12:20:59AM +0100, Harald Linden wrote:
> Add PID for Yaesu SCU-18 data cable, modify definitions for RATOC products
> to fit general scheme.
>
> --- ./drivers/usb/serial/ftdi_sio.c.orig 2015-11-28 00:14:58.411681897
> +0100
> +++ ./drivers/usb/serial/ftdi_sio.c 2015-11-28 00:15:28.112310588 +0100
> @@ -823,7 +823,8 @@ static const struct usb_device_id id_tab
> .driver_info = (kernel_ulong_t)&ftdi_jtag_quirk },
> { USB_DEVICE(FTDI_VID, FTDI_TURTELIZER_PID),
> .driver_info = (kernel_ulong_t)&ftdi_jtag_quirk },
> - { USB_DEVICE(RATOC_VENDOR_ID, RATOC_PRODUCT_ID_USB60F) },
> + { USB_DEVICE(RATOC_VID, RATOC_USB60F_PID) },
> + { USB_DEVICE(RATOC_VID, RATOC_YAESUSCU18_PID) },
> { USB_DEVICE(FTDI_VID, FTDI_REU_TINY_PID) },
>
> /* Papouch devices based on FTDI chip */
> --- ./drivers/usb/serial/ftdi_sio_ids.h.orig 2015-11-28 00:15:11.446518939
> +0100
> +++ ./drivers/usb/serial/ftdi_sio_ids.h 2015-11-28 00:15:33.779239742
> +0100
> @@ -613,8 +613,9 @@
> /*
> * RATOC REX-USB60F
> */
> -#define RATOC_VENDOR_ID 0x0584
> -#define RATOC_PRODUCT_ID_USB60F 0xb020
> +#define RATOC_VID 0x0584
Why change this #define?
> +#define RATOC_USB60F_PID 0xB020
Why change this #define?
> +#define RATOC_YAESUSCU18_PID 0xB03A /* Yaesu SCU-18 data cable made by RATOC
> */
>
> /*
> * Infineon Technologies
Can you combine this into the same patch, and provide a "Signed-off-by:"
line as described in Documentation/SubmittingPatches? Then we can apply
the patch.
thanks,
greg k-h
--
To unsubscribe from this list: send the line "unsubscribe linux-usb" in
the body of a message to majord...@vger.kernel.org
More majordomo info at http://vger.kernel.org/majordomo-info.html
