The code is checking that the Ethernet frame will fit into a
netdev allocated socket buffer within the constraints of MTU size,
Ethernet header length plus VLAN header length.
The original code was checking rx->remaining each loop of the while
loop that processes multiple Ethernet frames per URB and/or Ethernet
frames that span across URBs. rx->remaining decreases per while loop
so there is no point in potentially checking multiple times that the
Ethernet frame (remaining part) will fit into the netdev socket buffer.
The modification checks that the size of the Ethernet frame will fit
the netdev socket buffer before allocating the netdev socket buffer.
This avoids grabbing memory and then deciding that the Ethernet frame
is too big and then freeing the memory.
Signed-off-by: Dean Jenkins <dean_jenk...@mentor.com>
Signed-off-by: Mark Craske <mark_cra...@mentor.com>
---
drivers/net/usb/asix_common.c | 16 +++++++---------
1 file changed, 7 insertions(+), 9 deletions(-)
diff --git a/drivers/net/usb/asix_common.c b/drivers/net/usb/asix_common.c
index 89efd6a..6a8eddf 100644
--- a/drivers/net/usb/asix_common.c
+++ b/drivers/net/usb/asix_common.c
@@ -87,19 +87,17 @@ int asix_rx_fixup_internal(struct usbnet *dev, struct
sk_buff *skb,
rx->header, offset);
return 0;
}
+ if (size > dev->net->mtu + ETH_HLEN + VLAN_HLEN) {
+ netdev_err(dev->net, "asix_rx_fixup() Bad RX
Length %d\n",
+ size);
+ return 0;
+ }
+
rx->ax_skb = netdev_alloc_skb_ip_align(dev->net, size);
if (!rx->ax_skb)
return 0;
- rx->remaining = size;
- }
- if (rx->remaining > dev->net->mtu + ETH_HLEN + VLAN_HLEN) {
- netdev_err(dev->net, "asix_rx_fixup() Bad RX Length
%d\n",
- rx->remaining);
- kfree_skb(rx->ax_skb);
- rx->ax_skb = NULL;
- rx->remaining = 0;
- return 0;
+ rx->remaining = size;
}
if (rx->remaining > skb->len - offset) {
--
1.7.9.5
--
To unsubscribe from this list: send the line "unsubscribe linux-usb" in
the body of a message to majord...@vger.kernel.org
More majordomo info at http://vger.kernel.org/majordomo-info.html
