currently, when a zlp flag is set and an urb/usb_request
buffer is filled without a short packet, transfer() leaves
its status at -EINPROGRESS and does not rescan for short
packet.
In a scenario where ep.maxpacket bytes are copied,
URB_ZERO_PACKET is set, urb buffer is filled and usb_request
buffer is not, transfer() returns with an urb with
-EINPROGRESS status, which dummy_hcd treats as incomplete
transfer.
Check for zlp and rescan appropriately.
Signed-off-by: Igor Kotrasinski <i.kotrasi...@samsung.com>
---
drivers/usb/gadget/udc/dummy_hcd.c | 25 +++++++++++++++++--------
1 file changed, 17 insertions(+), 8 deletions(-)
diff --git a/drivers/usb/gadget/udc/dummy_hcd.c
b/drivers/usb/gadget/udc/dummy_hcd.c
index 181112c..df11021 100644
--- a/drivers/usb/gadget/udc/dummy_hcd.c
+++ b/drivers/usb/gadget/udc/dummy_hcd.c
@@ -1364,15 +1364,24 @@ top:
req->req.status = 0;
}
- /* many requests terminate without a short packet */
+ /*
+ * many requests terminate without a short packet.
+ * send a zlp if demanded by flags.
+ */
} else {
- if (req->req.length == req->req.actual
- && !req->req.zero)
- req->req.status = 0;
- if (urb->transfer_buffer_length == urb->actual_length
- && !(urb->transfer_flags
- & URB_ZERO_PACKET))
- *status = 0;
+ if (req->req.length == req->req.actual) {
+ if (req->req.zero && to_host)
+ rescan = 1;
+ else
+ req->req.status = 0;
+ }
+ if (urb->transfer_buffer_length == urb->actual_length) {
+ if (urb->transfer_flags & URB_ZERO_PACKET &&
+ !to_host)
+ rescan = 1;
+ else
+ *status = 0;
+ }
}
/* device side completion --> continuable */
--
1.9.1
--
To unsubscribe from this list: send the line "unsubscribe linux-usb" in
the body of a message to majord...@vger.kernel.org
More majordomo info at http://vger.kernel.org/majordomo-info.html
