This fixes an issue introduced in a previous patch that added checking of the
return status of device endpoint commands. It caught the Set Endpoint Transfer
Resource command failing occasionally. This is because the Transfer Resource
Index was not getting reset during a SET_INTERFACE request.
Signed-off-by: John Youn <johny...@synopsys.com>
---
drivers/usb/dwc3/ep0.c | 4 ++++
1 file changed, 4 insertions(+)
diff --git a/drivers/usb/dwc3/ep0.c b/drivers/usb/dwc3/ep0.c
index 2ef3c8d..69e769c 100644
--- a/drivers/usb/dwc3/ep0.c
+++ b/drivers/usb/dwc3/ep0.c
@@ -727,6 +727,10 @@ static int dwc3_ep0_std_request(struct dwc3 *dwc, struct
usb_ctrlrequest *ctrl)
dwc3_trace(trace_dwc3_ep0, "USB_REQ_SET_ISOCH_DELAY");
ret = dwc3_ep0_set_isoch_delay(dwc, ctrl);
break;
+ case USB_REQ_SET_INTERFACE:
+ dwc3_trace(trace_dwc3_ep0, "USB_REQ_SET_INTERFACE");
+ dwc->start_config_issued = false;
+ /* Fall through */
default:
dwc3_trace(trace_dwc3_ep0, "Forwarding to gadget driver");
ret = dwc3_ep0_delegate_req(dwc, ctrl);
--
2.3.2
--
To unsubscribe from this list: send the line "unsubscribe linux-usb" in
the body of a message to majord...@vger.kernel.org
More majordomo info at http://vger.kernel.org/majordomo-info.html
