Le 30/03/2015 12:35, Alan Stern a écrit : > On Mon, 30 Mar 2015, Valentin Longchamp wrote: > >> Hello, >> >> We are currently developing a board with an USB MFD device (I2C and GPIOs >> are to >> be supported). The device is soldered on the board and is the only one on the >> bus, so the bus is not really "dynamic". >> >> Since it's an USB device, it should be dynamically detected by the kernel >> and it >> would not require a node in the board's DTS. However, I need to have the >> devices >> which are "behind" the MFD USB device to be in the DTS (I2C bus topology, and >> some of the GPIOs are to be used directly by some other DTS nodes as well). >> >> Is there a way to add a node for USB device in a DTS ? Is there an available >> example for this ? > > No, there is no way to do it as far as I know. The main problem is > that Device Tree is static whereas USB devices are dynamic.
The PCI(e) bus has the same problem, yet you can specify a PCI device child node, and have a compatible string which will match the vendor id/device id tuple, device class etc... such that you can use Device Tree to add additional information not necessarily available in other ways such as MAC addresses and similar. Once the PCI bus is scanned, pci_device present in Device Tree get a device_node pointer assigned. I don't think there is anything doing this yet for USB devices, but maybe that's something that should be there? -- Florian -- To unsubscribe from this list: send the line "unsubscribe linux-usb" in the body of a message to majord...@vger.kernel.org More majordomo info at http://vger.kernel.org/majordomo-info.html
