By pass pullup DP in OTG fsm mode when do gadget connect, to let it handled
by OTG state machine.
Signed-off-by: Li Jun <jun...@freescale.com>
This patch can fix the problem you found with my HNP polling patchset after
below 3 patches introduced:
467a78c usb: chipidea: udc: apply new usb_udc_vbus_handler interface
628ef0d usb: udc: add usb_udc_vbus_handler
dfea9c9 usb: udc: store usb_udc pointer in struct usb_gadget
Problem:
- Connect USB cable and MicroAB cable between two boards
- Boot up two boards
- load g_mass_storage at B-device side, the enumeration will success,
and A will see a usb mass-storage device
- load g_mass_storage at A-device side, the problem has occurred, the
connection will be lost at the beginning, then connect again.
This patch is based on
commit eff933c1d3a2e046492b3dfc86db813856553a29
(chipidea: pci: make it depends on NOP_USB_XCEIV)
on branch peter-usb-dev of
git://git.kernel.org/pub/scm/linux/kernel/git/peter.chen/usb.git
---
drivers/usb/chipidea/udc.c | 4 ++++
1 file changed, 4 insertions(+)
diff --git a/drivers/usb/chipidea/udc.c b/drivers/usb/chipidea/udc.c
index 8ed497e..e1c1d99 100644
--- a/drivers/usb/chipidea/udc.c
+++ b/drivers/usb/chipidea/udc.c
@@ -1575,6 +1575,10 @@ static int ci_udc_pullup(struct usb_gadget *_gadget, int
is_on)
{
struct ci_hdrc *ci = container_of(_gadget, struct ci_hdrc, gadget);
+ /* Data+ pullup controlled by OTG state machine in OTG fsm mode */
+ if (ci_otg_is_fsm_mode(ci))
+ return 0;
+
pm_runtime_get_sync(&ci->gadget.dev);
if (is_on)
hw_write(ci, OP_USBCMD, USBCMD_RS, USBCMD_RS);
--
1.9.1
--
To unsubscribe from this list: send the line "unsubscribe linux-usb" in
the body of a message to majord...@vger.kernel.org
More majordomo info at http://vger.kernel.org/majordomo-info.html
