The dwc2-pci driver should be compiled as a module when configured to do so. If the dwc2-pci is configured as a module but actually built-in, it can cause build errors due to the fact that the generic-phy will be allowed to compile as a module causing undefined references.
Reported-by: Alan Cox <a...@lxorguk.ukuu.org.uk> Signed-off-by: John Youn <johny...@synopsys.com> --- drivers/usb/dwc2/Makefile | 6 ++---- 1 file changed, 2 insertions(+), 4 deletions(-) diff --git a/drivers/usb/dwc2/Makefile b/drivers/usb/dwc2/Makefile index 8f75267..f07b425 100644 --- a/drivers/usb/dwc2/Makefile +++ b/drivers/usb/dwc2/Makefile @@ -19,10 +19,8 @@ endif # mode. The PCI bus interface module will called dwc2_pci.ko and the platform # interface module will be called dwc2_platform.ko. -ifneq ($(CONFIG_USB_DWC2_PCI),) - obj-$(CONFIG_USB_DWC2) += dwc2_pci.o - dwc2_pci-y := pci.o -endif +obj-$(CONFIG_USB_DWC2_PCI) += dwc2_pci.o +dwc2_pci-y := pci.o obj-$(CONFIG_USB_DWC2_PLATFORM) += dwc2_platform.o dwc2_platform-y := platform.o -- 2.3.2 -- To unsubscribe from this list: send the line "unsubscribe linux-usb" in the body of a message to majord...@vger.kernel.org More majordomo info at http://vger.kernel.org/majordomo-info.html
