Re: [PATCH 12/15] ARM: dts: sun4i: Enable USB DRC on Chuwi V7 CW0825

[Maxime Ripard]

Hi Hans,

On Mon, Mar 09, 2015 at 09:40:25PM +0100, Hans de Goede wrote:
> Enable the otg/drc usb controller on the Chuwi V7 CW0825 tablet.
> 
> Signed-off-by: Hans de Goede <hdego...@redhat.com>
> ---
>  arch/arm/boot/dts/sun4i-a10-chuwi-v7-cw0825.dts | 31 
> +++++++++++++++++++++++++
>  1 file changed, 31 insertions(+)
> 
> diff --git a/arch/arm/boot/dts/sun4i-a10-chuwi-v7-cw0825.dts 
> b/arch/arm/boot/dts/sun4i-a10-chuwi-v7-cw0825.dts
> index 97fca89..034396c 100644
> --- a/arch/arm/boot/dts/sun4i-a10-chuwi-v7-cw0825.dts
> +++ b/arch/arm/boot/dts/sun4i-a10-chuwi-v7-cw0825.dts
> @@ -111,6 +111,26 @@
>       status = "okay";
>  };
>  
> +&pio {
> +     usb0_id_detect_pin: usb0_id_detect_pin@0 {
> +             allwinner,pins = "PH4";
> +             allwinner,function = "gpio_in";
> +             allwinner,drive = <SUN4I_PINCTRL_10_MA>;
> +             allwinner,pull = <SUN4I_PINCTRL_PULL_UP>;
> +     };
> +
> +     usb0_vbus_detect_pin: usb0_vbus_detect_pin@0 {
> +             allwinner,pins = "PH5";
> +             allwinner,function = "gpio_in";
> +             allwinner,drive = <SUN4I_PINCTRL_10_MA>;
> +             allwinner,pull = <SUN4I_PINCTRL_PULL_DOWN>;
> +     };
> +};
> +
> +&reg_usb0_vbus {
> +     status = "okay";
> +};
> +
>  &reg_usb2_vbus {
>       status = "okay";
>  };
> @@ -121,7 +141,18 @@
>       status = "okay";
>  };
>  
> +&usb_otg {
> +     pinctrl-names = "default";
> +     pinctrl-0 = <&usb0_id_detect_pin
> +                  &usb0_vbus_detect_pin>;
> +     id_det-gpio = <&pio 7 4 GPIO_ACTIVE_HIGH>; /* PH4 */
> +     vbus_det-gpio = <&pio 7 5 GPIO_ACTIVE_HIGH>; /* PH5 */
> +     dr_mode = "otg";

Is there a reason to not put that in the DTSI?

All the users seem to be wiring it as OTG.

Thanks!
Maxime

-- 
Maxime Ripard, Free Electrons
Embedded Linux, Kernel and Android engineering
http://free-electrons.com

signature.asc
Description: Digital signature