Hi Johan,
Sorry for the delay ... quite busy.
I posted the lastest patch v4 on the ML.
Regards,
Nicolas
On 02/27/2015 01:09 AM, Johan Hovold wrote:
On Thu, Feb 26, 2015 at 10:02:41AM -0500, Nicolas PLANEL wrote:
The ch341_set_baudrate() function initialize the device baud speed according
to the value on priv->baud_rate. By default the ch341_open() set it to a
hardcoded value (DEFAULT_BAUD_RATE 9600). Unfortunately, the tty_struct is
not initialized with the same default value. (usually 56700)
This means that the tty_struct and the device baud rate generator are not
synchronized after opening the port.
Fixup is done by calling ch341_set_termios() if tty exist.
Remove unnecessary variable priv->baud_rate setup as it's already done by
ch341_port_probe().
Please try to break your commit message lines at about 72 cols or so.
Signed-off-by: Nicolas PLANEL <nicolas.pla...@enovance.com>
---
drivers/usb/serial/ch341.c | 9 +++++++--
1 file changed, 7 insertions(+), 2 deletions(-)
diff --git a/drivers/usb/serial/ch341.c b/drivers/usb/serial/ch341.c
index 2d72aa3564a3..5d28ca165fdf 100644
--- a/drivers/usb/serial/ch341.c
+++ b/drivers/usb/serial/ch341.c
@@ -84,6 +84,10 @@ struct ch341_private {
u8 line_status; /* active status of modem control inputs */
};
+static void ch341_set_termios(struct tty_struct *tty,
+ struct usb_serial_port *port,
+ struct ktermios *old_termios);
+
static int ch341_control_out(struct usb_device *dev, u8 request,
u16 value, u16 index)
{
@@ -309,8 +313,6 @@ static int ch341_open(struct tty_struct *tty, struct
usb_serial_port *port)
struct ch341_private *priv = usb_get_serial_port_data(port);
int r;
- priv->baud_rate = DEFAULT_BAUD_RATE;
-
r = ch341_configure(serial->dev, priv);
if (r)
goto out;
@@ -323,6 +325,9 @@ static int ch341_open(struct tty_struct *tty, struct
usb_serial_port *port)
if (r)
goto out;
+ if (tty)
+ ch341_set_termios(tty, port, NULL);
+
Thanks for the v3. Looking at the code now, I see that the calls to
set baudrate and handshake in open are still there. I think you should
remove those now that you call set_termios.
Care to fix that up and resend?
Thanks,
Johan
--
To unsubscribe from this list: send the line "unsubscribe linux-usb" in
the body of a message to majord...@vger.kernel.org
More majordomo info at http://vger.kernel.org/majordomo-info.html
