We add f81232_get_register()/f81232_set_register() and necessary defines
for future patch with communication with F81232 USB control endpoint.
Because of this is a preparatory patch, there are unused function warning
with compiling. The functions will used with following patches.
Signed-off-by: Peter Hung <hpeter+linux_ker...@gmail.com>
---
drivers/usb/serial/f81232.c | 79 +++++++++++++++++++++++++++++++++++++++++++++
1 file changed, 79 insertions(+)
diff --git a/drivers/usb/serial/f81232.c b/drivers/usb/serial/f81232.c
index 669a2f2..1f29b95 100644
--- a/drivers/usb/serial/f81232.c
+++ b/drivers/usb/serial/f81232.c
@@ -30,6 +30,11 @@ static const struct usb_device_id id_table[] = {
};
MODULE_DEVICE_TABLE(usb, id_table);
+/* USB Control EP parameter */
+#define F81232_REGISTER_REQUEST 0xA0
+#define F81232_GET_REGISTER 0xc0
+#define F81232_SET_REGISTER 0x40
+
#define CONTROL_DTR 0x01
#define CONTROL_RTS 0x02
@@ -50,6 +55,80 @@ struct f81232_private {
u8 modem_status;
};
+static int f81232_get_register(struct usb_serial_port *port, u16 reg, u8 *data)
+{
+ int status;
+ u8 *tmp;
+ struct usb_device *dev = port->serial->dev;
+
+ if (!data)
+ return -EFAULT;
+
+ tmp = kmalloc(sizeof(u8), GFP_KERNEL);
+ if (!tmp)
+ return -ENOMEM;
+
+ status = usb_control_msg(dev,
+ usb_rcvctrlpipe(dev, 0),
+ F81232_REGISTER_REQUEST,
+ F81232_GET_REGISTER,
+ reg,
+ 0,
+ tmp,
+ sizeof(u8),
+ USB_CTRL_GET_TIMEOUT);
+ if (status <= 0) {
+ /* show something with failed */
+ dev_err(&port->dev, "%s failed status: %d\n", __func__, status);
+
+ if (status == 0)
+ status = -EIO;
+ else
+ status = usb_translate_errors(status);
+ } else {
+ status = 0; /* on success */
+ memcpy((void*) data, (void*) tmp, sizeof(u8));
+ }
+
+ kfree(tmp);
+ return status;
+}
+
+static int f81232_set_register(struct usb_serial_port *port, u16 reg, u8 data)
+{
+ int status;
+ u8 *tmp;
+ struct usb_device *dev = port->serial->dev;
+
+ tmp = kmalloc(sizeof(u8), GFP_KERNEL);
+ if (!tmp)
+ return -ENOMEM;
+
+ memcpy((void*) tmp, (void*) &data, sizeof(u8));
+
+ status = usb_control_msg(dev,
+ usb_sndctrlpipe(dev, 0),
+ F81232_REGISTER_REQUEST,
+ F81232_SET_REGISTER,
+ reg,
+ 0,
+ tmp,
+ sizeof(u8),
+ USB_CTRL_SET_TIMEOUT);
+ if (status <= 0) {
+ /* show something with failed */
+ dev_err(&port->dev, "%s failed status: %d\n", __func__, status);
+
+ if (status == 0)
+ status = -EIO;
+ else
+ status = usb_translate_errors(status);
+ } else
+ status = 0; /* on success */
+
+ kfree(tmp);
+ return status;
+}
static void f81232_update_line_status(struct usb_serial_port *port,
unsigned char *data,
unsigned int actual_length)
--
1.9.1
--
To unsubscribe from this list: send the line "unsubscribe linux-usb" in
the body of a message to majord...@vger.kernel.org
More majordomo info at http://vger.kernel.org/majordomo-info.html
