From: Fabio Estevam <fabio.este...@freescale.com>
Commit e9f2cefb0cdc2ae ("usb: phy: generic: migrate to gpio_desc") broke USB on
imx53-qsb board:
[ 0.115456] usb_phy_generic 50000000.aips:usbphy@0: Error requesting RESET
GPIO
[ 0.115554] usb_phy_generic: probe of 50000000.aips:usbphy@0 failed with
error -2
[ 0.115701] usb_phy_generic 50000000.aips:usbphy@1: Error requesting RESET
GPIO
[ 0.115761] usb_phy_generic: probe of 50000000.aips:usbphy@1 failed with
error -2
Driver should still probe even when 'reset-gpios' property is not passed.
Fix the error handling for devm_gpiod_get() and move the
"Error requesting RESET GPIO" message right after devm_gpio_request_one().
Signed-off-by: Fabio Estevam <fabio.este...@freescale.com>
---
I haven't tested the case when 'reset-gpios' is present yet.
Changes since v1:
- return the error in case of devm_gpio_request_one() failure
drivers/usb/phy/phy-generic.c | 25 ++++++++++++-------------
1 file changed, 12 insertions(+), 13 deletions(-)
diff --git a/drivers/usb/phy/phy-generic.c b/drivers/usb/phy/phy-generic.c
index dd05254..d28ae96 100644
--- a/drivers/usb/phy/phy-generic.c
+++ b/drivers/usb/phy/phy-generic.c
@@ -219,12 +219,13 @@ int usb_phy_gen_create_phy(struct device *dev, struct
usb_phy_generic *nop,
needs_vcc = of_property_read_bool(node, "vcc-supply");
nop->gpiod_reset = devm_gpiod_get(dev, "reset-gpios");
- err = PTR_ERR(nop->gpiod_reset);
- if (!err) {
- nop->gpiod_vbus = devm_gpiod_get(dev,
- "vbus-detect-gpio");
- err = PTR_ERR(nop->gpiod_vbus);
- }
+ if (IS_ERR(nop->gpiod_reset))
+ nop->gpiod_reset = NULL;
+
+ nop->gpiod_vbus = devm_gpiod_get(dev, "vbus-detect-gpio");
+ if (IS_ERR(nop->gpiod_vbus))
+ nop->gpiod_vbus = NULL;
+
} else if (pdata) {
type = pdata->type;
clk_rate = pdata->clk_rate;
@@ -232,19 +233,17 @@ int usb_phy_gen_create_phy(struct device *dev, struct
usb_phy_generic *nop,
if (gpio_is_valid(pdata->gpio_reset)) {
err = devm_gpio_request_one(dev, pdata->gpio_reset, 0,
dev_name(dev));
- if (!err)
- nop->gpiod_reset =
- gpio_to_desc(pdata->gpio_reset);
+ if (err) {
+ dev_err(dev, "Error requesting RESET GPIO\n");
+ return err;
+ }
+ nop->gpiod_reset = gpio_to_desc(pdata->gpio_reset);
}
nop->gpiod_vbus = pdata->gpiod_vbus;
}
if (err == -EPROBE_DEFER)
return -EPROBE_DEFER;
- if (err) {
- dev_err(dev, "Error requesting RESET GPIO\n");
- return err;
- }
nop->phy.otg = devm_kzalloc(dev, sizeof(*nop->phy.otg),
GFP_KERNEL);
--
1.9.1
--
To unsubscribe from this list: send the line "unsubscribe linux-usb" in
the body of a message to majord...@vger.kernel.org
More majordomo info at http://vger.kernel.org/majordomo-info.html
