Hi,
> -----Original Message-----
> From: Sergei Shtylyov [mailto:sergei.shtyl...@cogentembedded.com]
> Sent: Friday, January 2, 2015 6:09 PM
> To: Kaukab, Yousaf; linux-usb@vger.kernel.org; ba...@ti.com
> Cc: Herrero, Gregory; pa...@synopsys.com; r.bald...@samsung.com
> Subject: Re: [PATCH v2 03/30] usb: dwc2: gadget: don't process XferCompl on
> setup packet
>
> Hello.
>
> On 1/2/2015 5:42 PM, Mian Yousaf Kaukab wrote:
>
> > Only process DOEPINT.XferCompl on data packet as DOEPINTn.SetUp can
> > occur with or without DOEPINT.XferCompl. When DOEPINT.SetUp occurs
> > with DOEPINT.XferCompl, only DOEPINT.SetUp needs to be handled.
>
> > Moreover, ignore DOEPINT.XferCompl when it occurs with
> > DOEPINT.StupPktRcvd as driver needs to wait for DOEPINT.SetUp to
> > continue.
>
> > Signed-off-by: Mian Yousaf Kaukab <yousaf.kau...@intel.com>
> > ---
> > drivers/usb/dwc2/gadget.c | 4 ++++
> > drivers/usb/dwc2/hw.h | 1 +
> > 2 files changed, 5 insertions(+)
>
> > diff --git a/drivers/usb/dwc2/gadget.c b/drivers/usb/dwc2/gadget.c
> > index 843f3ee..e190d68 100644
> > --- a/drivers/usb/dwc2/gadget.c
> > +++ b/drivers/usb/dwc2/gadget.c
> > @@ -1810,6 +1810,10 @@ static void s3c_hsotg_epint(struct dwc2_hsotg
> *hsotg, unsigned int idx,
> > dev_dbg(hsotg->dev, "%s: ep%d(%s) DxEPINT=0x%08x\n",
> > __func__, idx, dir_in ? "in" : "out", ints);
> >
> > + /* Don't process XferCompl interrupt if it is a setup packet */
> > + if (ints & DXEPINT_SETUP || ints & DXEPINT_SETUP_RCVD)
>
> if (ints & (DXEPINT_SETUP | DXEPINT_SETUP_RCVD))
Sure.
In a rare case, DXEPINT_SETUP_RCVD was also set for a non-control endpoint. So
I will modify the check to following:
if (idx == 0 && (ints & (DXEPINT_SETUP | DXEPINT_SETUP_RCVD)))
>
> [...]
>
> WBR, Sergei
BR,
Yousaf
--
To unsubscribe from this list: send the line "unsubscribe linux-usb" in
the body of a message to majord...@vger.kernel.org
More majordomo info at http://vger.kernel.org/majordomo-info.html
