From: Gregory Herrero <gregory.herr...@intel.com>
This callback informs the driver about the total amount of current it
is allowed to draw. Share this information with the phy so that
current limits can be set for charging for example.
Signed-off-by: Gregory Herrero <gregory.herr...@intel.com>
---
drivers/usb/dwc2/gadget.c | 17 +++++++++++++++++
1 file changed, 17 insertions(+)
diff --git a/drivers/usb/dwc2/gadget.c b/drivers/usb/dwc2/gadget.c
index 193ab64..a1bffae 100644
--- a/drivers/usb/dwc2/gadget.c
+++ b/drivers/usb/dwc2/gadget.c
@@ -3047,12 +3047,29 @@ static int s3c_hsotg_vbus_session(struct usb_gadget
*gadget, int is_active)
return 0;
}
+/**
+ * s3c_hsotg_vbus_draw - report bMaxPower field
+ * @gadget: The usb gadget state
+ * @mA: Amount of current
+ *
+ * Report how much power the device may consume to the phy.
+ */
+static int s3c_hsotg_vbus_draw(struct usb_gadget *gadget, unsigned mA)
+{
+ struct dwc2_hsotg *hsotg = to_hsotg(gadget);
+
+ if (IS_ERR_OR_NULL(hsotg->uphy))
+ return -ENOTSUPP;
+ return usb_phy_set_power(hsotg->uphy, mA);
+}
+
static const struct usb_gadget_ops s3c_hsotg_gadget_ops = {
.get_frame = s3c_hsotg_gadget_getframe,
.udc_start = s3c_hsotg_udc_start,
.udc_stop = s3c_hsotg_udc_stop,
.pullup = s3c_hsotg_pullup,
.vbus_session = s3c_hsotg_vbus_session,
+ .vbus_draw = s3c_hsotg_vbus_draw,
};
/**
--
1.9.1
--
To unsubscribe from this list: send the line "unsubscribe linux-usb" in
the body of a message to majord...@vger.kernel.org
More majordomo info at http://vger.kernel.org/majordomo-info.html
