On i.MX6Q, the USBMISC registers are clocked by the IPG clock,
so there is no need to enable USBOH3 for the USBMISC driver.
Signed-off-by: Philipp Zabel <p.za...@pengutronix.de>
---
drivers/usb/chipidea/usbmisc_imx.c | 32 ++++++++++++++++++--------------
1 file changed, 18 insertions(+), 14 deletions(-)
diff --git a/drivers/usb/chipidea/usbmisc_imx.c
b/drivers/usb/chipidea/usbmisc_imx.c
index 926c997..f7b878d 100644
--- a/drivers/usb/chipidea/usbmisc_imx.c
+++ b/drivers/usb/chipidea/usbmisc_imx.c
@@ -338,23 +338,27 @@ static int usbmisc_imx_probe(struct platform_device *pdev)
if (IS_ERR(data->base))
return PTR_ERR(data->base);
- data->clk = devm_clk_get(&pdev->dev, NULL);
- if (IS_ERR(data->clk)) {
- dev_err(&pdev->dev,
- "failed to get clock, err=%ld\n", PTR_ERR(data->clk));
- return PTR_ERR(data->clk);
- }
-
- ret = clk_prepare_enable(data->clk);
- if (ret) {
- dev_err(&pdev->dev,
- "clk_prepare_enable failed, err=%d\n", ret);
- return ret;
- }
-
tmp_dev = (struct of_device_id *)
of_match_device(usbmisc_imx_dt_ids, &pdev->dev);
data->ops = (const struct usbmisc_ops *)tmp_dev->data;
+
+ /* on i.MX6Q, the USBMISC register space is clocked by the IPG clock */
+ if (data->ops != &imx6q_usbmisc_ops) {
+ data->clk = devm_clk_get(&pdev->dev, NULL);
+ if (IS_ERR(data->clk)) {
+ dev_err(&pdev->dev, "failed to get clock, err=%ld\n",
+ PTR_ERR(data->clk));
+ return PTR_ERR(data->clk);
+ }
+
+ ret = clk_prepare_enable(data->clk);
+ if (ret) {
+ dev_err(&pdev->dev,
+ "clk_prepare_enable failed, err=%d\n", ret);
+ return ret;
+ }
+ }
+
platform_set_drvdata(pdev, data);
return 0;
--
2.1.3
--
To unsubscribe from this list: send the line "unsubscribe linux-usb" in
the body of a message to majord...@vger.kernel.org
More majordomo info at http://vger.kernel.org/majordomo-info.html
