From: Fabio Estevam <fabio.este...@freescale.com>
There is no need to do an intermediate step for reading the
MX53_USB_OTG_PHY_CTRL_1_OFFSET register.
Read it directly instead.
Signed-off-by: Fabio Estevam <fabio.este...@freescale.com>
Signed-off-by: Peter Chen <peter.c...@freescale.com>
---
drivers/usb/chipidea/usbmisc_imx.c | 3 +--
1 file changed, 1 insertion(+), 2 deletions(-)
diff --git a/drivers/usb/chipidea/usbmisc_imx.c
b/drivers/usb/chipidea/usbmisc_imx.c
index 29200eb..58591e9 100644
--- a/drivers/usb/chipidea/usbmisc_imx.c
+++ b/drivers/usb/chipidea/usbmisc_imx.c
@@ -171,8 +171,7 @@ static int usbmisc_imx53_init(struct imx_usbmisc_data *data)
return -EINVAL;
/* Select a 24 MHz reference clock for the PHY */
- reg = usbmisc->base + MX53_USB_OTG_PHY_CTRL_1_OFFSET;
- val = readl(reg);
+ val = readl(usbmisc->base + MX53_USB_OTG_PHY_CTRL_1_OFFSET);
val &= ~MX53_USB_PHYCTRL1_PLLDIV_MASK;
val |= MX53_USB_PLL_DIV_24_MHZ;
writel(val, usbmisc->base + MX53_USB_OTG_PHY_CTRL_1_OFFSET);
--
1.9.1
--
To unsubscribe from this list: send the line "unsubscribe linux-usb" in
the body of a message to majord...@vger.kernel.org
More majordomo info at http://vger.kernel.org/majordomo-info.html
