On Wed, Oct 15, 2014 at 05:48:09PM +0300, Octavian Purdila wrote:

> +static int dln2_i2c_xfer(struct i2c_adapter *adapter,
> +                      struct i2c_msg *msgs, int num)
> +{
> +     struct dln2_i2c *dln2 = i2c_get_adapdata(adapter);
> +     struct i2c_msg *pmsg;
> +     struct device *dev = &dln2->pdev->dev;

You want to use the i2c-adapter device here (not the platform device).

> +     int i;
> +
> +     for (i = 0; i < num; i++) {
> +             int ret;
> +
> +             pmsg = &msgs[i];
> +
> +             if (pmsg->len > DLN2_I2C_MAX_XFER_SIZE) {
> +                     dev_warn(dev, "maximum transfer size exceeded\n");
> +                     return -EOPNOTSUPP;
> +             }
> +
> +             if (pmsg->flags & I2C_M_RD) {
> +                     ret = dln2_i2c_read(dln2, pmsg->addr, pmsg->buf,
> +                                         pmsg->len);
> +                     if (ret < 0)
> +                             return ret;
> +
> +                     pmsg->len = ret;
> +             } else {
> +                     ret = dln2_i2c_write(dln2, pmsg->addr, pmsg->buf,
> +                                          pmsg->len);
> +                     if (ret != pmsg->len)
> +                             return -EPROTO;
> +             }
> +     }
> +
> +     return num;
> +}

[...]

> +static int dln2_i2c_probe(struct platform_device *pdev)
> +{
> +     int ret;
> +     struct dln2_i2c *dln2;
> +     struct device *dev = &pdev->dev;
> +     struct dln2_platform_data *pdata = dev_get_platdata(&pdev->dev);
> +
> +     dln2 = devm_kzalloc(dev, sizeof(*dln2), GFP_KERNEL);
> +     if (!dln2)
> +             return -ENOMEM;
> +
> +     dln2->buf = devm_kmalloc(dev, DLN2_I2C_BUF_SIZE, GFP_KERNEL);
> +     if (!dln2->buf)
> +             return -ENOMEM;
> +
> +     dln2->pdev = pdev;
> +     dln2->port = pdata->port;
> +
> +     /* setup i2c adapter description */
> +     dln2->adapter.owner = THIS_MODULE;
> +     dln2->adapter.class = I2C_CLASS_HWMON;
> +     dln2->adapter.algo = &dln2_i2c_usb_algorithm;
> +     dln2->adapter.dev.parent = dev;
> +     i2c_set_adapdata(&dln2->adapter, dln2);
> +     snprintf(dln2->adapter.name, sizeof(dln2->adapter.name), "%s-%s-%d",
> +              "dln2-i2c", dev_name(pdev->dev.parent), dln2->port);
> +
> +     platform_set_drvdata(pdev, dln2);
> +
> +     /* initialize the i2c interface */

No longer "initialisation" since you dropped the frequency setup?

> +     ret = dln2_i2c_enable(dln2, true);
> +     if (ret < 0) {
> +             dev_err(dev, "failed to initialize adapter: %d\n", ret);

Same here.

> +             return ret;
> +     }
> +
> +     /* and finally attach to i2c layer */
> +     ret = i2c_add_adapter(&dln2->adapter);
> +     if (ret < 0) {
> +             dev_err(dev, "failed to add I2C adapter: %d\n", ret);
> +             goto out_disable;
> +     }
> +
> +     return 0;
> +
> +out_disable:
> +     dln2_i2c_enable(dln2, false);
> +
> +     return ret;
> +}

Looks good otherwise.

Johan
--
To unsubscribe from this list: send the line "unsubscribe linux-usb" in
the body of a message to majord...@vger.kernel.org
More majordomo info at  http://vger.kernel.org/majordomo-info.html

Reply via email to