Hi, I am using an USB3380 PCI-e to USB Controller with a 3.16 Kernel and the net2280 kernel driver with support for the USB3380.
When I load the g_printer kernel module and connect a windows pc to the usb card plug and play is not working. The device is recognized and usbprint is loaded as driver which is fine. When I connect a driver to this usb printer port I can see the print data stream when I do cat /dev/g_printer. While tracing the USB transfer I found that the driver doesn't answer on the usb setup transaction from the pc where the pnp string should be transmitted. Only a large amount of NAK packets are transmitted from the usb card to the pc. Is the USB3380 card known to not work with the g_printer gadget module? Best regards, Nils Buletta -- To unsubscribe from this list: send the line "unsubscribe linux-usb" in the body of a message to majord...@vger.kernel.org More majordomo info at http://vger.kernel.org/majordomo-info.html
