On Thu, Oct 09, 2014 at 08:40:29AM +0100, Lee Jones wrote:
> On Mon, 06 Oct 2014, Muthu Mani wrote:
> > +static int update_ep_details(struct usb_interface *interface,
> > + struct cyusbs23x *cyusbs)
> > +{
> > + struct usb_host_interface *iface_desc;
> > + struct usb_endpoint_descriptor *ep;
> > + int i;
> > +
> > + iface_desc = interface->cur_altsetting;
> > +
> > + for (i = 0; i < iface_desc->desc.bNumEndpoints; ++i) {
> > +
> > + ep = &iface_desc->endpoint[i].desc;
> > +
> > + if (!cyusbs->bulk_in_ep_num && usb_endpoint_is_bulk_in(ep))
> > + cyusbs->bulk_in_ep_num = ep->bEndpointAddress;
> > + if (!cyusbs->bulk_out_ep_num && usb_endpoint_is_bulk_out(ep))
> > + cyusbs->bulk_out_ep_num = ep->bEndpointAddress;
> > + if (!cyusbs->intr_in_ep_num && usb_endpoint_is_int_in(ep))
> > + cyusbs->intr_in_ep_num = ep->bEndpointAddress;
> > + }
>
> All of the USB specific code in this driver will require a USB Ack.
I'll review it once the incomplete gpio-driver issue has been resolved.
> > + dev_dbg(&interface->dev, "%s intr_in=%d, bulk_in=%d, bulk_out=%d\n",
> > + __func__, cyusbs->intr_in_ep_num ,
> > + cyusbs->bulk_in_ep_num, cyusbs->bulk_out_ep_num);
> > +
> > + if (!cyusbs->bulk_in_ep_num || !cyusbs->bulk_out_ep_num ||
> > + !cyusbs->intr_in_ep_num)
> > + return -ENODEV;
> > +
> > + return 0;
> > +}
[...]
> > diff --git a/include/linux/mfd/cyusbs23x.h b/include/linux/mfd/cyusbs23x.h
> > +/* Serial interfaces (I2C, SPI, UART) differ in interface subclass */
> > +enum cy_scb_modes {
> > + CY_USBS_SCB_DISABLED = 0,
> > + CY_USBS_SCB_UART = 1,
> > + CY_USBS_SCB_SPI = 2,
> > + CY_USBS_SCB_I2C = 3
>
> No need to number these.
As it's not an arbitrary enumeration, I think they should be initialised
explicitly. They could be defined in the mfd driver though, as they only
appear to be needed during probe.
Johan
--
To unsubscribe from this list: send the line "unsubscribe linux-usb" in
the body of a message to majord...@vger.kernel.org
More majordomo info at http://vger.kernel.org/majordomo-info.html
