[ added linux-kernel ML to cc: ]
Hi,
On Tuesday, August 26, 2014 11:19:55 AM dingu...@opensource.altera.com wrote:
> From: Dinh Nguyen <dingu...@opensource.altera.com>
>
> Add the proper init calls for either host, gadget or both in platform.c
>
> Signed-off-by: Dinh Nguyen <dingu...@opensource.altera.com>
> Acked-by: Paul Zimmerman <pa...@synopsys.com>
> ---
> drivers/usb/dwc2/core.h | 13 +++++++++++++
> drivers/usb/dwc2/gadget.c | 2 +-
> drivers/usb/dwc2/platform.c | 28 ++++++++++++++++++++++++----
Where are correspoding changes to pci.c?
I cannot find them in your patchset.
> 3 files changed, 38 insertions(+), 5 deletions(-)
>
> diff --git a/drivers/usb/dwc2/core.h b/drivers/usb/dwc2/core.h
> index f55e62d..3a49a00 100644
> --- a/drivers/usb/dwc2/core.h
> +++ b/drivers/usb/dwc2/core.h
> @@ -960,6 +960,19 @@ extern void dwc2_dump_global_registers(struct dwc2_hsotg
> *hsotg);
> */
> extern u16 dwc2_get_otg_version(struct dwc2_hsotg *hsotg);
>
> +/* Gadget defines */
> +#if defined(CONFIG_USB_DWC2_PERIPHERAL) || defined(CONFIG_USB_DWC2_DUAL_ROLE)
> +extern int s3c_hsotg_remove(struct dwc2_hsotg *hsotg);
> +extern void s3c_hsotg_core_init(struct dwc2_hsotg *dwc2);
> +extern int dwc2_gadget_init(struct dwc2_hsotg *hsotg, int irq);
> +#else
> +static inline void s3c_hsotg_core_init(struct dwc2_hsotg *dwc2) {}
> +static inline int s3c_hsotg_remove(struct dwc2_hsotg *dwc2)
> +{ return 0; }
> +static inline int dwc2_gadget_init(struct dwc2_hsotg *hsotg, int irq)
> +{ return 0; }
> +#endif
> +
> #if defined(CONFIG_USB_DWC2_HOST) || defined(CONFIG_USB_DWC2_DUAL_ROLE)
> /**
> * dwc2_hcd_get_frame_number() - Returns current frame number
> diff --git a/drivers/usb/dwc2/gadget.c b/drivers/usb/dwc2/gadget.c
> index 96f868f..efa68a0 100644
> --- a/drivers/usb/dwc2/gadget.c
> +++ b/drivers/usb/dwc2/gadget.c
> @@ -3572,7 +3572,7 @@ err_clk:
> * s3c_hsotg_remove - remove function for hsotg driver
> * @pdev: The platform information for the driver
> */
> -static int s3c_hsotg_remove(struct dwc2_hsotg *hsotg)
> +int s3c_hsotg_remove(struct dwc2_hsotg *hsotg)
> {
> usb_del_gadget_udc(&hsotg->gadget);
>
> diff --git a/drivers/usb/dwc2/platform.c b/drivers/usb/dwc2/platform.c
> index dd2f8f5..2871f351 100644
> --- a/drivers/usb/dwc2/platform.c
> +++ b/drivers/usb/dwc2/platform.c
> @@ -92,7 +92,14 @@ static int dwc2_driver_remove(struct platform_device *dev)
> {
> struct dwc2_hsotg *hsotg = platform_get_drvdata(dev);
>
> - dwc2_hcd_remove(hsotg);
> + if (IS_ENABLED(CONFIG_USB_DWC2_PERIPHERAL))
> + s3c_hsotg_remove(hsotg);
> + else if (IS_ENABLED(CONFIG_USB_DWC2_HOST))
> + dwc2_hcd_remove(hsotg);
> + else { /* dual role */
> + dwc2_hcd_remove(hsotg);
> + s3c_hsotg_remove(hsotg);
Why not simply always call:
dwc2_hcd_remove(hsotg);
s3c_hsotg_remove(hsotg);
and add appropriate stub for dwc2_hcd_remove() for
CONFIG_USB_DWC2_PERIPHERAL=y?
> + }
>
> return 0;
> }
> @@ -176,9 +183,22 @@ static int dwc2_driver_probe(struct platform_device *dev)
>
> hsotg->dr_mode = of_usb_get_dr_mode(dev->dev.of_node);
>
> - retval = dwc2_hcd_init(hsotg, irq, params);
> - if (retval)
> - return retval;
> + if (IS_ENABLED(CONFIG_USB_DWC2_DUAL_ROLE)) {
> + retval = dwc2_gadget_init(hsotg, irq);
> + if (retval)
> + return retval;
> + retval = dwc2_hcd_init(hsotg, irq, params);
> + if (retval)
> + return retval;
> + } else if (IS_ENABLED(CONFIG_USB_DWC2_HOST)) {
> + retval = dwc2_hcd_init(hsotg, irq, params);
> + if (retval)
> + return retval;
> + } else if (IS_ENABLED(CONFIG_USB_DWC2_PERIPHERAL)) {
> + retval = dwc2_gadget_init(hsotg, irq);
> + if (retval)
> + return retval;
> + }
ditto but for dwc2_hcd_init().
> platform_set_drvdata(dev, hsotg);
Best regards,
--
Bartlomiej Zolnierkiewicz
Samsung R&D Institute Poland
Samsung Electronics
--
To unsubscribe from this list: send the line "unsubscribe linux-usb" in
the body of a message to majord...@vger.kernel.org
More majordomo info at http://vger.kernel.org/majordomo-info.html
