Hi Peter,
On Thu, Aug 07, 2014 at 02:45:15PM +0800, Peter Chen wrote:
> According to On-The-Go and Embedded Host Supplement to the USB Revision
> 2.0 Specification, the targeted hosts (non-PC hosts) include both
> embedded hosts and otg, and each targeted host product defines the
> set of supported peripherals on a TPL (Targeted Peripheral List). So,
> TPL should apply for both OTG and embedded host, and the otg support is
> not a must for embedded host.
>
> The TPL support feature will only be effect when CONFIG_USB_OTG_WHITELIST
> has been chosen and hcd->tpl_support flag is set, it can avoid the enumeration
> fails problem for the user who chooses CONFIG_USB_OTG_WHITELIST wrongly.
>
> Signed-off-by: Peter Chen <peter.c...@freescale.com>
> ---
> drivers/usb/core/hub.c | 20 +++-----------------
> drivers/usb/core/otg_whitelist.h | 22 ++++++++++------------
> 2 files changed, 13 insertions(+), 29 deletions(-)
>
> diff --git a/drivers/usb/core/hub.c b/drivers/usb/core/hub.c
> index 8a4dcbc..5e0b8eb 100644
> --- a/drivers/usb/core/hub.c
> +++ b/drivers/usb/core/hub.c
> @@ -2199,9 +2199,7 @@ static void announce_device(struct usb_device *udev)
> static inline void announce_device(struct usb_device *udev) { }
> #endif
>
> -#ifdef CONFIG_USB_OTG
> #include "otg_whitelist.h"
> -#endif
>
> /**
> * usb_enumerate_device_otg - FIXME (usbcore-internal)
> @@ -2261,21 +2259,6 @@ static int usb_enumerate_device_otg(struct usb_device
> *udev)
> }
> }
> }
> -
> - if (!is_targeted(udev)) {
> -
> - /* Maybe it can talk to us, though we can't talk to it.
> - * (Includes HNP test device.)
> - */
> - if (udev->bus->b_hnp_enable || udev->bus->is_b_host) {
> - err = usb_port_suspend(udev, PMSG_SUSPEND);
> - if (err < 0)
> - dev_dbg(&udev->dev, "HNP fail, %d\n", err);
> - }
> - err = -ENOTSUPP;
If I did not miss anything then I see an issue if above hunk is removed.
Suppose, there is an OTG B device which is not supported by host, then
the above hunk was suspending the bus so that B device can get a
chance to become host. By removing above hunk, how do we cater this
scenario?
~Pratyush
PS: All other changes of the series seems fine to me.
> - goto fail;
> - }
> -fail:
> #endif
> return err;
> }
> @@ -2319,6 +2302,9 @@ static int usb_enumerate_device(struct usb_device *udev)
> if (err < 0)
> return err;
>
> + if (!is_targeted(udev))
> + return -ENOTSUPP;
> +
> usb_detect_interface_quirks(udev);
>
> return 0;
> diff --git a/drivers/usb/core/otg_whitelist.h
> b/drivers/usb/core/otg_whitelist.h
> index e8cdce5..4d6a134 100644
> --- a/drivers/usb/core/otg_whitelist.h
> +++ b/drivers/usb/core/otg_whitelist.h
> @@ -10,8 +10,8 @@
> */
>
> /*
> - * This OTG Whitelist is the OTG "Targeted Peripheral List". It should
> - * mostly use of USB_DEVICE() or USB_DEVICE_VER() entries..
> + * This OTG and Embedded Host Whitelist is "Targeted Peripheral List".
> + * It should mostly use of USB_DEVICE() or USB_DEVICE_VER() entries..
> *
> * YOU _SHOULD_ CHANGE THIS LIST TO MATCH YOUR PRODUCT AND ITS TESTING!
> */
> @@ -49,9 +49,9 @@ static struct usb_device_id whitelist_table [] = {
> static int is_targeted(struct usb_device *dev)
> {
> struct usb_device_id *id = whitelist_table;
> + struct usb_hcd *hcd = bus_to_hcd(dev->bus);
>
> - /* possible in developer configs only! */
> - if (!dev->bus->otg_port)
> + if (!IS_ENABLED(CONFIG_USB_OTG_WHITELIST) || !hcd->tpl_support)
> return 1;
>
> /* HNP test device is _never_ targeted (see OTG spec 6.6.6) */
> @@ -99,14 +99,12 @@ static int is_targeted(struct usb_device *dev)
> /* add other match criteria here ... */
>
>
> - /* OTG MESSAGE: report errors here, customize to match your product */
> - dev_err(&dev->dev, "device v%04x p%04x is not supported\n",
> - le16_to_cpu(dev->descriptor.idVendor),
> - le16_to_cpu(dev->descriptor.idProduct));
> -#ifdef CONFIG_USB_OTG_WHITELIST
> + /*
> + * Required error message for OTG & EH compliance test,
> + * customize it to match your product
> + */
> + dev_err(&dev->dev, "unsupported device\n");
> +
> return 0;
> -#else
> - return 1;
> -#endif
> }
>
> --
> 1.7.9.5
>
> --
> To unsubscribe from this list: send the line "unsubscribe linux-usb" in
> the body of a message to majord...@vger.kernel.org
> More majordomo info at http://vger.kernel.org/majordomo-info.html
--
To unsubscribe from this list: send the line "unsubscribe linux-usb" in
the body of a message to majord...@vger.kernel.org
More majordomo info at http://vger.kernel.org/majordomo-info.html
